Are you running this with dosemu -s? what 32 bit binary?? what version of dosemu?? On Mon, Apr 5, 2010 at 3:55 PM, John Coppens <john@xxxxxxxxxxxx> wrote: > Hi all. > > I'm running the 32-bit DOSemu binary on an AMD64 system, and by far most > applications run fine. I have trouble with the Freepascal compiler though. > Both its installer and the actual compiler fail. > > In the case of the compiler, running it without parameters gives the > command line options. This works fine. When a source file is specified, > DOSemu aborts with the message below. Do I have to modify the conf file? > I have tried several changes, none make any difference. > > I'd appreciate suggestions! > John > > Output from DOSemu: > > ERROR: Fault handler re-entered! signal=11 _trapno=0xE > ERROR: cpu exception in dosemu code outside of DPMI client! > trapno: 0x0e errorcode: 0x00000007 cr2: 0x00000000 > eip: 0x004a2cc1 esp: 0x7fff16e2d270 eflags: 0x00010202 > cs: 0x0033 ds: 0x013f es: 0x013f ss: 0x002b > ERROR: Please report the contents of ~/.dosemu/boot.log at > http://sourceforge.net/tracker/?atid=457447&group_id=49784&func=browse > It would be even more helpful if would recompile DOSEMU and reproduce this > bug with "debug on" in compiletime-settings. > Page fault: write instruction to linear address: 0x00000000 > CPU was in user mode > Exception was caused by insufficient privilege > -- > To unsubscribe from this list: send the line "unsubscribe linux-msdos" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
