> Can you please try the change below? If it works and everyone is fine
> with it, I will send a proper patch.
Thank you! That fixed the problem.
Tested-by: Wladimir J. van der Laan <laanwj@xxxxxxxxx>
> ---
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -687,6 +687,20 @@ static inline void esdhc_pltfm_set_clock(struct
> sdhci_host *host,
> return;
> }
>
> + /* For i.MX53 eSDHCv3, SYSCTL.SDCLKFS may not be set to 0. */
> + if (is_imx53_esdhc(imx_data)) {
> + /*
> + * According to the i.MX53 reference manual, if DLLCTRL[10] can
> + * be set, then the controller is eSDHCv3, else it is eSDHCv2.
> + */
> + val = readl(host->ioaddr + ESDHC_DLL_CTRL);
> + writel(val | BIT(10), host->ioaddr + ESDHC_DLL_CTRL);
> + temp = readl(host->ioaddr + ESDHC_DLL_CTRL);
> + writel(val, host->ioaddr + ESDHC_DLL_CTRL);
> + if (temp & BIT(10))
> + pre_div = 2;
> + }
> +
> temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
> temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
> | ESDHC_CLOCK_MASK);
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
