On 12 July 2016 at 09:46, Dong Aisheng <aisheng.dong@xxxxxxx> wrote: > Patch 1~10 are mainly sdhci cleanup patches while patch 7,9,10 > are fixes which seems needed for stable tree as well. > > The main work is: > 1) using more robust mmc_regulator_set_vqmmc > 2) add auto retune support > 3) improve sdhci-esdhc-imx stability > 4) add state save and restore for low power mode > > Change Log: > v1->v2: > * address all Andrian's comments > * below patches are dropped > mmc: sdhci: move sdhci_get_cd() forward to avoid declaration > mmc: core: fix a comment typo > mmc: sdhci: re-factor sdhci_start_signal_voltage() > mmc: core: mmc_regulator_set_vqmmc not return error if vqmmc/vmmc not > exist > mmc: sdhci: check SDHCI_QUIRK2_NO_1_8_V when do voltage switch > mmc: sdhci: rename quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 > Above clean up is not needed so far according to Andrian. > > mmc: sdhci: fix incorrect get data interrupt during no data transfer > This one is not needed anymore cause Andrian had another fix > already in tree. > (commit 0e0a35d2d4058 mmc: sdhci: Track whether a reset is pending) > > mmc: core: disable auto retune during card detection process > This one will sent out in another patch series to fix in CORE. > > v1: > http://www.spinics.net/lists/linux-mmc/msg36316.html > > Dong Aisheng (15): > mmc: sdhci: using common mmc_regulator_set_vqmmc() > mmc: sdhci-esdhc-imx: remove SDHCI_QUIRK_BROKEN_TIMEOUT_VAL > mmc: sdhci-esdhc-imx: add esdhc specific suspend resume callback > mmc: sdhci-esdhc-imx: restore watermark level setting after resume > mmc: sdhci-esdhci-imx: disable DLL delay line settings explicitly > mmc: sdhci-esdhc-imx: support setting tuning start point > doc: dt: fsl-imx-esdhc: add set tuning start point binding > mmc: sdhci: add standard hw auto retuning support > mmc: sdhci-esdhc-imx: enable hw auto retuning for STD_TUNING > mmc: sdhci-esdhc-imx: enable hw auto retuning for MAN_TUNING > mmc: sdhci-esdhc-imx: fix strobe DLL lock wrong clock issue > mmc: sdhci-esdhc-imx: factor out hw related initialization into > function > mmc: sdhci-esdhc-imx: move tuning static configuration into hwinit > function > mmc: sdhci-esdhci-imx: re-initialize hw state after resume > mmc: sdhci-esdhc-imx: clear tuning bits during driver probe > > .../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 2 + > drivers/mmc/host/sdhci-esdhc-imx.c | 149 ++++++++++++++------- > drivers/mmc/host/sdhci.c | 24 ++-- > drivers/mmc/host/sdhci.h | 3 + > include/linux/platform_data/mmc-esdhc-imx.h | 1 + > 5 files changed, 122 insertions(+), 57 deletions(-) > > -- > 1.9.1 > Thanks, applied for next! Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
