[PATCH V2 00/15] a few sdhci/imx clean up and fix patches

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Patch 1~10 are mainly sdhci cleanup patches while patch 7,9,10
are fixes which seems needed for stable tree as well.

The main work is:
1) using more robust mmc_regulator_set_vqmmc 
2) add auto retune support
3) improve sdhci-esdhc-imx stability
4) add state save and restore for low power mode

Change Log:
v1->v2:
 * address all Andrian's comments
 * below patches are dropped
  mmc: sdhci: move sdhci_get_cd() forward to avoid declaration
  mmc: core: fix a comment typo
  mmc: sdhci: re-factor sdhci_start_signal_voltage()
  mmc: core: mmc_regulator_set_vqmmc not return error if vqmmc/vmmc not
    exist
  mmc: sdhci: check SDHCI_QUIRK2_NO_1_8_V when do voltage switch
  mmc: sdhci: rename quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12
	Above clean up is not needed so far according to Andrian.

  mmc: sdhci: fix incorrect get data interrupt during no data transfer
	This one is not needed anymore cause Andrian had another fix
	already in tree.
	(commit 0e0a35d2d4058 mmc: sdhci: Track whether a reset is pending)

  mmc: core: disable auto retune during card detection process
	This one will sent out in another patch series to fix in CORE.

v1:
http://www.spinics.net/lists/linux-mmc/msg36316.html

Dong Aisheng (15):
  mmc: sdhci: using common mmc_regulator_set_vqmmc()
  mmc: sdhci-esdhc-imx: remove SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
  mmc: sdhci-esdhc-imx: add esdhc specific suspend resume callback
  mmc: sdhci-esdhc-imx: restore watermark level setting after resume
  mmc: sdhci-esdhci-imx: disable DLL delay line settings explicitly
  mmc: sdhci-esdhc-imx: support setting tuning start point
  doc: dt: fsl-imx-esdhc: add set tuning start point binding
  mmc: sdhci: add standard hw auto retuning support
  mmc: sdhci-esdhc-imx: enable hw auto retuning for STD_TUNING
  mmc: sdhci-esdhc-imx: enable hw auto retuning for MAN_TUNING
  mmc: sdhci-esdhc-imx: fix strobe DLL lock wrong clock issue
  mmc: sdhci-esdhc-imx: factor out hw related initialization into
    function
  mmc: sdhci-esdhc-imx: move tuning static configuration into hwinit
    function
  mmc: sdhci-esdhci-imx: re-initialize hw state after resume
  mmc: sdhci-esdhc-imx: clear tuning bits during driver probe

 .../devicetree/bindings/mmc/fsl-imx-esdhc.txt      |   2 +
 drivers/mmc/host/sdhci-esdhc-imx.c                 | 149 ++++++++++++++-------
 drivers/mmc/host/sdhci.c                           |  24 ++--
 drivers/mmc/host/sdhci.h                           |   3 +
 include/linux/platform_data/mmc-esdhc-imx.h        |   1 +
 5 files changed, 122 insertions(+), 57 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux