On Thu, Jul 21, 2016 at 12:32:37PM +0300, Adrian Hunter wrote: > On 12/07/16 10:46, Dong Aisheng wrote: > > Patch 1~10 are mainly sdhci cleanup patches while patch 7,9,10 > > are fixes which seems needed for stable tree as well. > > I have ack'ed all the sdhci-related patches. i.e. all but patch 7 the dt > bindings change. > > I am not sure what needs to be done for stable. I would suggest these > patches are queued for 4.8, then Dong can send the relevant patches to the > linux-stable mailing list separately after -rc1. > Good suggestion! I also think that would be a better way due to many updates recently which may cause trouble on the simply back porting. Regards Dong Aisheng > > > > The main work is: > > 1) using more robust mmc_regulator_set_vqmmc > > 2) add auto retune support > > 3) improve sdhci-esdhc-imx stability > > 4) add state save and restore for low power mode > > > > Change Log: > > v1->v2: > > * address all Adrian's comments > > * below patches are dropped > > mmc: sdhci: move sdhci_get_cd() forward to avoid declaration > > mmc: core: fix a comment typo > > mmc: sdhci: re-factor sdhci_start_signal_voltage() > > mmc: core: mmc_regulator_set_vqmmc not return error if vqmmc/vmmc not > > exist > > mmc: sdhci: check SDHCI_QUIRK2_NO_1_8_V when do voltage switch > > mmc: sdhci: rename quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 > > Above clean up is not needed so far according to Adrian. > > > > mmc: sdhci: fix incorrect get data interrupt during no data transfer > > This one is not needed anymore cause Adrian had another fix > > already in tree. > > (commit 0e0a35d2d4058 mmc: sdhci: Track whether a reset is pending) > > > > mmc: core: disable auto retune during card detection process > > This one will sent out in another patch series to fix in CORE. > > > > v1: > > http://www.spinics.net/lists/linux-mmc/msg36316.html > > > > Dong Aisheng (15): > > mmc: sdhci: using common mmc_regulator_set_vqmmc() > > mmc: sdhci-esdhc-imx: remove SDHCI_QUIRK_BROKEN_TIMEOUT_VAL > > mmc: sdhci-esdhc-imx: add esdhc specific suspend resume callback > > mmc: sdhci-esdhc-imx: restore watermark level setting after resume > > mmc: sdhci-esdhci-imx: disable DLL delay line settings explicitly > > mmc: sdhci-esdhc-imx: support setting tuning start point > > doc: dt: fsl-imx-esdhc: add set tuning start point binding > > mmc: sdhci: add standard hw auto retuning support > > mmc: sdhci-esdhc-imx: enable hw auto retuning for STD_TUNING > > mmc: sdhci-esdhc-imx: enable hw auto retuning for MAN_TUNING > > mmc: sdhci-esdhc-imx: fix strobe DLL lock wrong clock issue > > mmc: sdhci-esdhc-imx: factor out hw related initialization into > > function > > mmc: sdhci-esdhc-imx: move tuning static configuration into hwinit > > function > > mmc: sdhci-esdhci-imx: re-initialize hw state after resume > > mmc: sdhci-esdhc-imx: clear tuning bits during driver probe > > > > .../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 2 + > > drivers/mmc/host/sdhci-esdhc-imx.c | 149 ++++++++++++++------- > > drivers/mmc/host/sdhci.c | 24 ++-- > > drivers/mmc/host/sdhci.h | 3 + > > include/linux/platform_data/mmc-esdhc-imx.h | 1 + > > 5 files changed, 122 insertions(+), 57 deletions(-) > > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
