On 6 July 2016 at 18:19, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote: > On 29 June 2016 at 03:42, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote: >> Dear Ulf, >> >> Could you pull these patches into your repository (next branch)? >> >> Best Regards, >> Jaehoon Chung >> >> The following changes since commit 466780648db4aed7722de91e9d9749c6c5969327: >> >> mmc: sh_mmcif: Use a 10s timeout in the error recovery path (2016-06-27 11:19:29 +0200) >> >> are available in the git repository at: >> >> https://github.com/jh80chung/dw-mmc.git for-ulf >> >> for you to fetch changes up to 545585efee538cac5202b415a3d0c12b4556e96f: >> >> mmc: dw_mmc: fix unmap sg twice when finding data err (2016-06-29 10:39:05 +0900) >> >> ---------------------------------------------------------------- >> Ben Dooks (1): >> mmc: dw_mmc: fix 32bit little-endian access of des1 field >> >> Doug Anderson (2): >> mmc: dw_mmc: Consider HLE errors to be data and command errors >> mmc: dw_mmc: Wait for data transfer after response errors. >> >> Jaehoon Chung (4): >> mmc: dw_mmc: exynos: fix the NULL pointer dereference error >> mmc: dw_mmc: remove the quirks flags >> mmc: dw_mmc: add the card write threshold for HS400 mode >> mmc: dw_mmc: prevent to set the wrong value >> >> Jérôme Forissier (1): >> mmc: dw_mmc: k3: add MMC_CAP_CMD23 >> >> Seung-Woo Kim (1): >> mmc: dw_mmc: remove UBSAN warning in dw_mci_setup_bus() >> >> Shawn Lin (3): >> mmc: dw_mmc: remove redundant of set_bit and clear_bit >> mmc: dw_mmc: check card present before starting request >> mmc: dw_mmc: fix unmap sg twice when finding data err >> >> drivers/mmc/host/dw_mmc-exynos.c | 2 +- >> drivers/mmc/host/dw_mmc-k3.c | 7 ++ >> drivers/mmc/host/dw_mmc-rockchip.c | 3 - >> drivers/mmc/host/dw_mmc.c | 157 ++++++++++++++++++++++--------------- >> drivers/mmc/host/dw_mmc.h | 10 +-- >> include/linux/mmc/dw_mmc.h | 9 --- >> 6 files changed, 108 insertions(+), 80 deletions(-) > > Thanks Jaehoon, pulled into my next branch! Reported by kernelci, It seems like some of these patches are causing the exynos5250-arndale to fail to boot. I looked briefly at the logs and the bisect report (which isn't complete) and it turns out that the eMMC card at mmc0 isn't detected properly. Here's the boot summary (it turns out there are more boards failing, don't know if all are related to dw_mmc, yet): https://kernelci.org/boot/all/job/ulfh/kernel/v4.7-rc5-92-g4e01b578ade9/ Here's the bootlog: https://storage.kernelci.org/ulfh/v4.7-rc5-92-g4e01b578ade9/arm-multi_v7_defconfig+CONFIG_EFI=y/lab-baylibre-seattle/boot-exynos5250-arndale.txt Please, could any of you dw_mmc experts have a look at this as soon as possible!? Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
