already done, see mail i sent to the list 2016-02-06 with subject
"dvb_usb_dvbsky module not loading (ida_remove something)"
i dont know if more info is needed or not.
On 2016-02-18 06:56, Olli Salonen wrote:
Hi Torbjörn,
If you did bisect this, can you please send the bisect result and a
description of the issue to the linux-media mailing list and to the
author of the commit that caused the problem?
Thanks!
Cheers,
-olli
On 18 February 2016 at 00:15, Torbjorn Jansson
<torbjorn.jansson@xxxxxxxxxxxxxxxxxx> wrote:
retested with media_tree at commit: 13f6e8887a1f61764a05a3348476d38071201f08
this is the most recent one that i bisected before that doesn't result in
module load problems.
with my patch to add the new revision of the 4650 usb device and above
commit plus your proposed change to si2168.c did not produce any different
result.
still problems tuning dvbt2 channels.
i also tested my updated tuning file for dvbv5-scan with my other usb stick:
Bus 001 Device 004: ID 2013:024f PCTV Systems nanoStick T2 290e
to confirm the scanning input file was good and it was.
the pctv stick can properly tune the t2 muxes.
On 2016-02-17 22:54, Torbjorn Jansson wrote:
testing is likely to be a bit problematic because using the most recent
code from media_tree results in the following during module load and
after this the modules are not loaded properly (/dev/dvb missing)
i will retry with older code.
[ 5.558524] WARNING: You are using an experimental version of the
media stack.
As the driver is backported to an older kernel, it
doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to
linux-media@xxxxxxxxxxxxxxx):
3d0ccad0dbbd51b64d307c64cc163002334afbfa [media] siano:
use generic function to create MC device
dd47fbd40e6ea6884e295e13a2e50b0894258fdf [media]
smsusb: don't sleep while atomic
21cf734c79e6c741dcdf383dbaef3b551b931568 [media] siano:
firmware buffer is too small
[ 5.750834] usb 1-2: dvb_usb_v2: found a 'TechnoTrend TT-connect
CT2-4650 CI v1.1' in warm state
[ 5.751737] usb 1-2: dvb_usb_v2: will pass the complete MPEG2
transport stream to the software demuxer
[ 5.751754] DVB: registering new adapter (TechnoTrend TT-connect
CT2-4650 CI v1.1)
[ 5.751799] usb 1-2: media controller created
[ 5.754172] usb 1-2: dvb_usb_v2: MAC address: bc:ea:2b:65:06:6f
[ 5.754527] dvb_create_media_entity: media entity 'dvb-demux'
registered.
[ 5.761734] i2c i2c-1: Added multiplexed i2c bus 2
[ 5.761738] si2168 1-0064: Silicon Labs Si2168 successfully attached
[ 5.767308] si2157 2-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[ 5.776422] dvb_create_media_entity: media entity 'dvb-ca-en50221'
registered.
[ 5.777199] sp2 1-0040: CIMaX SP2 successfully attached
[ 5.777211] usb 1-2: DVB: registering adapter 0 frontend 0 (Silicon
Labs Si2168)...
[ 5.777214] dvb_create_media_entity: media entity 'Silicon Labs
Si2168' registered.
[ 5.780048] ------------[ cut here ]------------
[ 5.780059] WARNING: CPU: 1 PID: 568 at lib/idr.c:1051
ida_remove+0xef/0x120()
[ 5.780060] ida_remove called for id=512 which is not allocated.
[ 5.780061] Modules linked in: sp2(OE) si2157(OE) si2168(OE)
dvb_usb_dvbsky(OE+) m88ds3103(OE) dvb_usb_v2(OE) i2c_mux dvb_core(OE)
rc_core(OE) videodev(OE) media(OE) iosf_mbi ppdev crct10dif_pclmul
crc32_pclmul crc32c_intel snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm
parport_pc joydev snd_timer snd parport virtio_balloon soundcore pvpanic
i2c_piix4 acpi_cpufreq tpm_tis tpm qxl 8021q drm_kms_helper garp stp llc
mrp virtio_blk ttm virtio_net virtio_console drm serio_raw virtio_pci
virtio_ring ata_generic virtio pata_acpi
[ 5.780086] CPU: 1 PID: 568 Comm: systemd-udevd Tainted: G OE
4.3.4-200.fc22.x86_64 #1
[ 5.780087] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 5.780089] 0000000000000000 0000000069734069 ffff88007c23b6f8
ffffffff813a625f
[ 5.780090] ffff88007c23b740 ffff88007c23b730 ffffffff810a07c2
ffff88003680ac08
[ 5.780092] ffff88003680ac08 0000000000000206 ffff88007b7a4500
ffff88007b43e158
[ 5.780094] Call Trace:
[ 5.780097] [<ffffffff813a625f>] dump_stack+0x44/0x55
[ 5.780100] [<ffffffff810a07c2>] warn_slowpath_common+0x82/0xc0
[ 5.780102] [<ffffffff810a085c>] warn_slowpath_fmt+0x5c/0x80
[ 5.780107] [<ffffffff813bab85>] ? find_next_bit+0x15/0x20
[ 5.780109] [<ffffffff813a73ff>] ida_remove+0xef/0x120
[ 5.780110] [<ffffffff813a7e7b>] ida_simple_remove+0x2b/0x50
[ 5.780114] [<ffffffffa022404d>]
__media_device_unregister_entity+0x2d/0xd0 [media]
[ 5.780116] [<ffffffffa022411c>]
media_device_unregister_entity+0x2c/0x40 [media]
[ 5.780119] [<ffffffffa02770ff>] dvb_media_device_free+0x1f/0x130
[dvb_core]
[ 5.780122] [<ffffffffa0277252>] dvb_unregister_device+0x42/0x80
[dvb_core]
[ 5.780125] [<ffffffffa027da05>] dvb_ca_en50221_release+0x75/0xb0
[dvb_core]
[ 5.780127] [<ffffffffa02af289>] sp2_remove+0x49/0xa0 [sp2]
[ 5.780134] [<ffffffff815dc18b>] i2c_device_remove+0x4b/0xa0
[ 5.780137] [<ffffffff814d9501>] __device_release_driver+0xa1/0x150
[ 5.780141] [<ffffffff814d95d3>] device_release_driver+0x23/0x30
[ 5.780143] [<ffffffff814d8c21>] bus_remove_device+0x101/0x170
[ 5.780145] [<ffffffff814d4ec9>] device_del+0x139/0x260
[ 5.780147] [<ffffffff813a8647>] ? kobject_put+0x27/0x50
[ 5.780149] [<ffffffff815dc680>] ? __unregister_dummy+0x30/0x30
[ 5.780151] [<ffffffff814d500e>] device_unregister+0x1e/0x60
[ 5.780153] [<ffffffff815dc6be>] __unregister_client+0x3e/0x50
[ 5.780154] [<ffffffff814d4970>] device_for_each_child+0x50/0x90
[ 5.780156] [<ffffffff815de99e>] i2c_del_adapter+0x20e/0x300
[ 5.780166] [<ffffffff81203ed8>] ? kfree+0x128/0x130
[ 5.780169] [<ffffffffa025c974>] dvb_usbv2_exit+0x1c4/0x3c0
[dvb_usb_v2]
[ 5.780171] [<ffffffffa025d44f>] dvb_usbv2_probe+0xff/0x1200
[dvb_usb_v2]
[ 5.780174] [<ffffffff814e4619>] ? __pm_runtime_set_status+0x189/0x230
[ 5.780182] [<ffffffff81570282>] usb_probe_interface+0x1b2/0x2d0
[ 5.780184] [<ffffffff814d9b82>] driver_probe_device+0x222/0x480
[ 5.780185] [<ffffffff814d9e64>] __driver_attach+0x84/0x90
[ 5.780187] [<ffffffff814d9de0>] ? driver_probe_device+0x480/0x480
[ 5.780188] [<ffffffff814d765c>] bus_for_each_dev+0x6c/0xc0
[ 5.780190] [<ffffffff814d933e>] driver_attach+0x1e/0x20
[ 5.780191] [<ffffffff814d8e7b>] bus_add_driver+0x1eb/0x280
[ 5.780193] [<ffffffff814da6b0>] driver_register+0x60/0xe0
[ 5.780195] [<ffffffff8156eb24>] usb_register_driver+0x84/0x140
[ 5.780196] [<ffffffffa00bb000>] ? 0xffffffffa00bb000
[ 5.780199] [<ffffffffa00bb01e>] dvbsky_usb_driver_init+0x1e/0x1000
[dvb_usb_dvbsky]
[ 5.780202] [<ffffffff81002123>] do_one_initcall+0xb3/0x200
[ 5.780206] [<ffffffff8177d99e>] ? preempt_schedule_common+0x1e/0x40
[ 5.780208] [<ffffffff8177d9dc>] ? _cond_resched+0x1c/0x30
[ 5.780210] [<ffffffff8120427e>] ? kmem_cache_alloc_trace+0x19e/0x220
[ 5.780214] [<ffffffff811a4947>] ? do_init_module+0x27/0x1e5
[ 5.780215] [<ffffffff811a497f>] do_init_module+0x5f/0x1e5
[ 5.780221] [<ffffffff811254fe>] load_module+0x201e/0x2630
[ 5.780223] [<ffffffff811219c0>] ? __symbol_put+0x60/0x60
[ 5.780229] [<ffffffff81229830>] ? kernel_read+0x50/0x80
[ 5.780231] [<ffffffff81125d59>] SyS_finit_module+0xb9/0xf0
[ 5.780237] [<ffffffff8178182e>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 5.780239] ---[ end trace 944e313bd83469d2 ]---
[ 5.783508] dvb_usb_dvbsky: probe of 1-2:1.0 failed with error -12
[ 5.783524] usbcore: registered new interface driver dvb_usb_dvbsky
On 2016-02-17 14:42, Olli Salonen wrote:
Hi Torbjörn,
Try commenting out this line in si2168.c and let me know if that
changes things.
if (c->delivery_system == SYS_DVBT2) {
/* select PLP */
cmd.args[0] = 0x52;
cmd.args[1] = c->stream_id & 0xff;
// cmd.args[2] = c->stream_id == NO_STREAM_ID_FILTER ? 0
: 1;
cmd.wlen = 3;
cmd.rlen = 1;
ret = si2168_cmd_execute(s, &cmd);
if (ret)
goto err;
}
Cheers,
-olli
On 17 February 2016 at 08:24, Olli Salonen <olli.salonen@xxxxxx> wrote:
Hi Torbjörn,
I connected my old v1 CT2-4650CI to my test PC and indeed, it seems
that there's something wrong with tuning to T2 channels.
Here's first a tune with the CT2-4500CI (same as DVBSky T980C) and
then with the CT2-4650CI.
olli@dl160:~$ dvbv5-zap -a 1 "Yle Teema HD" -c dvb_channel.conf -o
teema.ts -t 10
using demux '/dev/dvb/adapter1/demux0'
reading channels from file 'dvb_channel.conf'
service has pid type 06: 50
tuning to 184500000 Hz
video pid 316
dvb_set_pesfilter 316
audio pid 880
dvb_set_pesfilter 880
(0x00)
Lock (0x1f) Signal= -72.00dBm C/N= 26.75dB
Lock (0x1f) Signal= -72.00dBm C/N= 26.50dB
Record to file 'teema.ts' started
copied 6478856 bytes (632 Kbytes/sec)
Lock (0x1f) Signal= -72.00dBm C/N= 26.50dB
olli@dl160:~$ dvbv5-zap -a 0 "Yle Teema HD" -c dvb_channel.conf -o
teema.ts -t 3
using demux '/dev/dvb/adapter0/demux0'
reading channels from file 'dvb_channel.conf'
service has pid type 06: 50
tuning to 184500000 Hz
video pid 316
dvb_set_pesfilter 316
audio pid 880
dvb_set_pesfilter 880
(0x00)
(0x00) Signal= -104.00dBm
(0x00) Signal= -104.00dBm
frontend doesn't lock
I'll try to look into that...
Cheers,
-olli
On 17 February 2016 at 01:12, Torbjorn Jansson
<torbjorn.jansson@xxxxxxxxxxxxxxxxxx> wrote:
Perfect.
Looks like i have some more testing to do in the next few days.
something else, when testing my 4650 card i cant get it to tune
properly to
dvb-t2 muxes.
but i'm not yet sure if this is a driver issue or if i made a
mistake with
the tuning parameters since the file i use that came with the dvbv5
programs
was missing the t2 mux so i had to put that one in manually.
so more testing is needed first and with your patch for the T980C
card i can
probably test both things at the same time.
On 2016-02-16 21:20, Olli Salonen wrote:
Hi all,
Found the issue and submitted a patch.
The I2C buses for T980C/T2-4500CI were crossed when CI registration
was moved to its own function.
Cheers,
-olli
On 31 January 2016 at 10:55, Torbjorn Jansson
<torbjorn.jansson@xxxxxxxxxxxxxxxxxx> wrote:
this ci problem is the reason i decided to buy the CT2-4650 usb based
device
instead.
but the 4650 was a slightly newer revision needing a patch i
submitted
earlier.
and also this 4650 device does not have auto switching between
dvb-t and
t2
like the dvbsky card have, so i also need an updated version of
mythtv.
my long term wish is to not have to patch things or build custom
kernels
or
modules.
so anything done to improve the dvbsky card or the 4650 is much
appreciated.
On 2016-01-28 20:42, Olli Salonen wrote:
Hi Jürgen & Mauro,
I did bisect this and it seems this rather big patch broke it:
2b0aac3011bc7a9db27791bed4978554263ef079 is the first bad commit
commit 2b0aac3011bc7a9db27791bed4978554263ef079
Author: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
Date: Tue Dec 23 13:48:07 2014 -0200
[media] cx23885: move CI/MAC registration to a separate
function
As reported by smatch:
drivers/media/pci/cx23885/cx23885-dvb.c:2080
dvb_register()
Function too hairy. Giving up.
This is indeed a too complex function, with lots of stuff
inside.
Breaking this into two functions makes it a little bit
less hairy.
Signed-off-by: Mauro Carvalho Chehab
<mchehab@xxxxxxxxxxxxxxx>
It's getting a bit late, so I'll call it a day now and have a
look at
the patch to see what goes wrong there.
Cheers,
-olli
On 28 January 2016 at 20:57, Jurgen Kramer <gtmkramer@xxxxxxxxx>
wrote:
Hi Olli,
On Thu, 2016-01-28 at 19:26 +0200, Olli Salonen wrote:
Hi Jürgen,
Did you get anywhere with this?
I have a clone of your card and was just starting to look at this
issue. Kernel 3.19 seems to work ok, but 4.3 not. Did you have any
time to try to pinpoint this more?
No, unfortunately not. I have spend a few hours adding printk's
but it
did not get me any closer what causes the issue. This really needs
investigation from someone who is more familiar with linux media.
Last thing I tried was the latest (semi open) drivers from
dvbsky on a
4.3 kernel. Here the CI and CAM registered successfully.
Greetings,
Jurgen
Cheers,
-olli
On 12 September 2015 at 10:02, Jurgen Kramer <gtmkramer@xxxxxxxxx>
wrote:
On Fri, 2015-09-11 at 22:01 +0200, Torbjorn Jansson wrote:
On 2015-08-23 19:50, Jurgen Kramer wrote:
On Sun, 2015-07-12 at 12:38 +0200, Jurgen Kramer wrote:
I have been running a couple of DVBSky T980C's with CIs with
success
using an older kernel (3.17.8) with media-build and some
added patches
from the mailing list.
I thought lets try a current 4.0 kernel to see if I no longer
need to be
running a custom kernel. Everything works just fine except
the CAM
module. I am seeing these:
[ 456.574969] dvb_ca adapter 0: Invalid PC card inserted :(
[ 456.626943] dvb_ca adapter 1: Invalid PC card inserted :(
[ 456.666932] dvb_ca adapter 2: Invalid PC card inserted :(
The normal 'CAM detected and initialised' messages to do show
up with
4.0.8
I am not sure what changed in the recent kernels, what is
needed to
debug this?
Jurgen
Retest. I've isolated one T980C on another PC with kernel
4.1.5, still the same 'Invalid PC card inserted :(' message.
Even after installed today's media_build from git no
improvement.
Any hints where to start looking would be appreciated!
cimax2.c|h do not seem to have changed. There are changes to
dvb_ca_en50221.c
Jurgen
did you get it to work?
No, it needs a thorough debug session. So far no one seems
able to
help...
i got a dvbsky T980C too for dvb-t2 reception and so far the
only
drivers that have worked at all is the ones from dvbsky
directly.
i was very happy when i noticed that recent kernels have support
for it
built in but unfortunately only the modules and firmware loads
but then
nothing actually works.
i use mythtv and it complains a lot about the signal, running
femon also
produces lots of errors.
so i had to switch back to kernel 4.0.4 with mediabuild from
dvbsky.
if there were any other dvb-t2 card with ci support that had
better
drivers i would change right away.
one problem i have with the mediabuilt from dvbsky is that at
boot the
cam never works and i have to first tune a channel, then remove
and
reinstert the cam to get it to work.
without that nothing works.
and finally a problem i ran into when i tried mediabuilt from
linuxtv.org.
fedora uses kernel modules with .ko.xz extension so when you
install the
mediabuilt modulels you get one modulename.ko and one
modulename.ko.xz
before a make install from mediabuild overwrote the needed
modules.
any advice on how to handle this now?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
