Hi Torbjörn,
I connected my old v1 CT2-4650CI to my test PC and indeed, it seems
that there's something wrong with tuning to T2 channels.
Here's first a tune with the CT2-4500CI (same as DVBSky T980C) and
then with the CT2-4650CI.
olli@dl160:~$ dvbv5-zap -a 1 "Yle Teema HD" -c dvb_channel.conf -o
teema.ts -t 10
using demux '/dev/dvb/adapter1/demux0'
reading channels from file 'dvb_channel.conf'
service has pid type 06: 50
tuning to 184500000 Hz
video pid 316
dvb_set_pesfilter 316
audio pid 880
dvb_set_pesfilter 880
(0x00)
Lock (0x1f) Signal= -72.00dBm C/N= 26.75dB
Lock (0x1f) Signal= -72.00dBm C/N= 26.50dB
Record to file 'teema.ts' started
copied 6478856 bytes (632 Kbytes/sec)
Lock (0x1f) Signal= -72.00dBm C/N= 26.50dB
olli@dl160:~$ dvbv5-zap -a 0 "Yle Teema HD" -c dvb_channel.conf -o teema.ts -t 3
using demux '/dev/dvb/adapter0/demux0'
reading channels from file 'dvb_channel.conf'
service has pid type 06: 50
tuning to 184500000 Hz
video pid 316
dvb_set_pesfilter 316
audio pid 880
dvb_set_pesfilter 880
(0x00)
(0x00) Signal= -104.00dBm
(0x00) Signal= -104.00dBm
frontend doesn't lock
I'll try to look into that...
Cheers,
-olli
On 17 February 2016 at 01:12, Torbjorn Jansson
<torbjorn.jansson@xxxxxxxxxxxxxxxxxx> wrote:
> Perfect.
> Looks like i have some more testing to do in the next few days.
>
> something else, when testing my 4650 card i cant get it to tune properly to
> dvb-t2 muxes.
> but i'm not yet sure if this is a driver issue or if i made a mistake with
> the tuning parameters since the file i use that came with the dvbv5 programs
> was missing the t2 mux so i had to put that one in manually.
>
> so more testing is needed first and with your patch for the T980C card i can
> probably test both things at the same time.
>
>
> On 2016-02-16 21:20, Olli Salonen wrote:
>>
>> Hi all,
>>
>> Found the issue and submitted a patch.
>>
>> The I2C buses for T980C/T2-4500CI were crossed when CI registration
>> was moved to its own function.
>>
>> Cheers,
>> -olli
>>
>> On 31 January 2016 at 10:55, Torbjorn Jansson
>> <torbjorn.jansson@xxxxxxxxxxxxxxxxxx> wrote:
>>>
>>> this ci problem is the reason i decided to buy the CT2-4650 usb based
>>> device
>>> instead.
>>> but the 4650 was a slightly newer revision needing a patch i submitted
>>> earlier.
>>> and also this 4650 device does not have auto switching between dvb-t and
>>> t2
>>> like the dvbsky card have, so i also need an updated version of mythtv.
>>>
>>> my long term wish is to not have to patch things or build custom kernels
>>> or
>>> modules.
>>> so anything done to improve the dvbsky card or the 4650 is much
>>> appreciated.
>>>
>>>
>>> On 2016-01-28 20:42, Olli Salonen wrote:
>>>>
>>>>
>>>> Hi Jürgen & Mauro,
>>>>
>>>> I did bisect this and it seems this rather big patch broke it:
>>>>
>>>> 2b0aac3011bc7a9db27791bed4978554263ef079 is the first bad commit
>>>> commit 2b0aac3011bc7a9db27791bed4978554263ef079
>>>> Author: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
>>>> Date: Tue Dec 23 13:48:07 2014 -0200
>>>>
>>>> [media] cx23885: move CI/MAC registration to a separate function
>>>>
>>>> As reported by smatch:
>>>> drivers/media/pci/cx23885/cx23885-dvb.c:2080 dvb_register()
>>>> Function too hairy. Giving up.
>>>>
>>>> This is indeed a too complex function, with lots of stuff inside.
>>>> Breaking this into two functions makes it a little bit less hairy.
>>>>
>>>> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
>>>>
>>>> It's getting a bit late, so I'll call it a day now and have a look at
>>>> the patch to see what goes wrong there.
>>>>
>>>> Cheers,
>>>> -olli
>>>>
>>>> On 28 January 2016 at 20:57, Jurgen Kramer <gtmkramer@xxxxxxxxx> wrote:
>>>>>
>>>>>
>>>>> Hi Olli,
>>>>>
>>>>> On Thu, 2016-01-28 at 19:26 +0200, Olli Salonen wrote:
>>>>>>
>>>>>>
>>>>>> Hi Jürgen,
>>>>>>
>>>>>> Did you get anywhere with this?
>>>>>>
>>>>>> I have a clone of your card and was just starting to look at this
>>>>>> issue. Kernel 3.19 seems to work ok, but 4.3 not. Did you have any
>>>>>> time to try to pinpoint this more?
>>>>>
>>>>>
>>>>> No, unfortunately not. I have spend a few hours adding printk's but it
>>>>> did not get me any closer what causes the issue. This really needs
>>>>> investigation from someone who is more familiar with linux media.
>>>>>
>>>>> Last thing I tried was the latest (semi open) drivers from dvbsky on a
>>>>> 4.3 kernel. Here the CI and CAM registered successfully.
>>>>>
>>>>> Greetings,
>>>>> Jurgen
>>>>>
>>>>>> Cheers,
>>>>>> -olli
>>>>>>
>>>>>> On 12 September 2015 at 10:02, Jurgen Kramer <gtmkramer@xxxxxxxxx>
>>>>>> wrote:
>>>>>>>
>>>>>>>
>>>>>>> On Fri, 2015-09-11 at 22:01 +0200, Torbjorn Jansson wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>> On 2015-08-23 19:50, Jurgen Kramer wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Sun, 2015-07-12 at 12:38 +0200, Jurgen Kramer wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have been running a couple of DVBSky T980C's with CIs with
>>>>>>>>>> success
>>>>>>>>>> using an older kernel (3.17.8) with media-build and some
>>>>>>>>>> added patches
>>>>>>>>>> from the mailing list.
>>>>>>>>>>
>>>>>>>>>> I thought lets try a current 4.0 kernel to see if I no longer
>>>>>>>>>> need to be
>>>>>>>>>> running a custom kernel. Everything works just fine except
>>>>>>>>>> the CAM
>>>>>>>>>> module. I am seeing these:
>>>>>>>>>>
>>>>>>>>>> [ 456.574969] dvb_ca adapter 0: Invalid PC card inserted :(
>>>>>>>>>> [ 456.626943] dvb_ca adapter 1: Invalid PC card inserted :(
>>>>>>>>>> [ 456.666932] dvb_ca adapter 2: Invalid PC card inserted :(
>>>>>>>>>>
>>>>>>>>>> The normal 'CAM detected and initialised' messages to do show
>>>>>>>>>> up with
>>>>>>>>>> 4.0.8
>>>>>>>>>>
>>>>>>>>>> I am not sure what changed in the recent kernels, what is
>>>>>>>>>> needed to
>>>>>>>>>> debug this?
>>>>>>>>>>
>>>>>>>>>> Jurgen
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Retest. I've isolated one T980C on another PC with kernel
>>>>>>>>> 4.1.5, still the same 'Invalid PC card inserted :(' message.
>>>>>>>>> Even after installed today's media_build from git no
>>>>>>>>> improvement.
>>>>>>>>>
>>>>>>>>> Any hints where to start looking would be appreciated!
>>>>>>>>>
>>>>>>>>> cimax2.c|h do not seem to have changed. There are changes to
>>>>>>>>> dvb_ca_en50221.c
>>>>>>>>>
>>>>>>>>> Jurgen
>>>>>>>>>
>>>>>>>>
>>>>>>>> did you get it to work?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> No, it needs a thorough debug session. So far no one seems able to
>>>>>>> help...
>>>>>>>
>>>>>>>> i got a dvbsky T980C too for dvb-t2 reception and so far the only
>>>>>>>> drivers that have worked at all is the ones from dvbsky directly.
>>>>>>>>
>>>>>>>> i was very happy when i noticed that recent kernels have support
>>>>>>>> for it
>>>>>>>> built in but unfortunately only the modules and firmware loads
>>>>>>>> but then
>>>>>>>> nothing actually works.
>>>>>>>> i use mythtv and it complains a lot about the signal, running
>>>>>>>> femon also
>>>>>>>> produces lots of errors.
>>>>>>>>
>>>>>>>> so i had to switch back to kernel 4.0.4 with mediabuild from
>>>>>>>> dvbsky.
>>>>>>>>
>>>>>>>> if there were any other dvb-t2 card with ci support that had
>>>>>>>> better
>>>>>>>> drivers i would change right away.
>>>>>>>>
>>>>>>>> one problem i have with the mediabuilt from dvbsky is that at
>>>>>>>> boot the
>>>>>>>> cam never works and i have to first tune a channel, then remove
>>>>>>>> and
>>>>>>>> reinstert the cam to get it to work.
>>>>>>>> without that nothing works.
>>>>>>>>
>>>>>>>> and finally a problem i ran into when i tried mediabuilt from
>>>>>>>> linuxtv.org.
>>>>>>>> fedora uses kernel modules with .ko.xz extension so when you
>>>>>>>> install the
>>>>>>>> mediabuilt modulels you get one modulename.ko and one
>>>>>>>> modulename.ko.xz
>>>>>>>>
>>>>>>>> before a make install from mediabuild overwrote the needed
>>>>>>>> modules.
>>>>>>>> any advice on how to handle this now?
>>>>>>>>
>>>>>>>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
