All, >>If all goes well, with Jarrod's change, you should be able to test the >>hdpvr module with the ir-kbd-i2c module and test IR Rx. >>Strictly speaking, lirc_zilog needs some rework to use the kernel >>internal interfaces properly. It might still work, but don't be >>surprised if it doesn't. >>I might get to working on lirc_zilog tonight, but otherwise not until >>this weekend. >Sounds good. Will give any feedback I can! Is Tx completely a no show at this point? From my circle of friends that >use the hdpvr, they all use >the Tx for channel changing to cable boxes. This small sample might not be indicative of >the larger hdpvr user base, though! :) Well, it's been a few very busy months! I've upgraded my distribution, and coupled that with a move to kernel 2.6.38. I noticed that many patches for hdpvr and zilog have made it into the kernel source (at least staging) Well, I am trying this out, and zilog does not probe the Tx on the HDPVR. Is that expected? Well, it sort of does. May 21 12:51:06 jgauthier-mythtv kernel: [ 42.519404] lirc_zilog: Zilog/Hauppauge IR driver initializing May 21 12:51:06 jgauthier-mythtv kernel: [ 42.521233] lirc_zilog: probing IR Rx on Hauppage HD PVR I2C (i2c-1) May 21 12:51:06 jgauthier-mythtv kernel: [ 42.521239] lirc_zilog: probe of IR Rx on Hauppage HD PVR I2C (i2c-1) done. Waiting on IR Tx. May 21 12:51:06 jgauthier-mythtv kernel: [ 42.521245] lirc_zilog: probing IR Tx on Hauppage HD PVR I2C (i2c-1) May 21 12:51:06 jgauthier-mythtv kernel: [ 42.521372] i2c i2c-1: lirc_dev: driver lirc_zilog registered at minor = 1 May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088260] lirc_zilog: Zilog/Hauppauge IR blaster firmware version 2.1.0 loaded May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088265] lirc_zilog: probe of IR Tx on Hauppage HD PVR I2C (i2c-1) done. IR unit ready. May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088279] lirc_zilog: probing IR Rx on Hauppage HD PVR I2C (i2c-2) May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088282] lirc_zilog: ir_probe: probing IR Rx on Hauppage HD PVR I2C (i2c-2) failed with 1 May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088288] Zilog/Hauppauge i2c IR: probe of 2-0071 failed with error 1 May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088293] lirc_zilog: probing IR Tx on Hauppage HD PVR I2C (i2c-2) May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088295] lirc_zilog: ir_probe: probing IR Tx on Hauppage HD PVR I2C (i2c-2) failed with 1 May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088298] Zilog/Hauppauge i2c IR: probe of 2-0070 failed with error 1 May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088329] lirc_zilog: initialization complete Admittedly, I do not understand exactly what I am reading. It seems to probe the IR Tx (i2c-1) successfully: May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088265] lirc_zilog: probe of IR Tx on Hauppage HD PVR I2C (i2c-1) done. IR unit ready. But, then below on (i2c-2) is failed: May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088282] lirc_zilog: ir_probe: probing IR Rx on Hauppage HD PVR I2C (i2c-2) failed with 1 May 21 12:51:06 jgauthier-mythtv kernel: [ 43.088288] Zilog/Hauppauge i2c IR: probe of 2-0071 failed with error 1 Either way irsend doesn't work: irsend: command failed: SEND_ONCE blaster 0_74_KEY_2 irsend: hardware does not support sending Are there other pieces I need to glue together? I attempted to move to lirc 0.9, and recompiled everything (including zilog) against it, (I read it somewhere) but that did not really make a difference. Thanks, Jason -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
