2011/4/2 Antti Palosaari <crope@xxxxxx>: > On 04/02/2011 02:06 PM, adq wrote: >> >> 2011/4/2 Antti Palosaari<crope@xxxxxx>: >>> >>> On 04/02/2011 04:24 AM, adq wrote: >>>> >>>> Hi, just been trying it out, with no success. On my test machine, FE0 >>>> no longer tunes, but FE1 is still fine, so I've just been testing FE0. >>> >>> You try to say other frontend / tuner is physically dead? Which one? >> >> No no - I can revive it by simply unplugging and replugging the >> device, but I was avoiding doing that to see if we could either track >> down something erroneous, or be able to reset it from software. >> >> It'd be /really/ handy if they'd connected that reset tuner GPIO :( >> There isn't a way to completely reset the device from software I take >> it? Or any other GPIOs hanging about I could test with? > > There is few I know, USB command 0x13 boots AF9015 somehow, USB command 0x5a > reconnects it from USB bus. But most interesting one is demodulator reset > register 0xe205, write 1 to that reg should reset it. Just tried writing 1 to 0xe205 - no change. Looks like USB commands 0x13/0x5a will be done as part of a normal module reload? (In which case it doesn't fix it). I can actually reboot the machine completely, and the problem stays! Only physically unplugging the device sorts it. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
