Hi All, During all the work done on the atomisp driver I have mostly been testing on devices with an ov2680 sensor. As such I have also done a lot of work on the atomisp-ov2680.c atomisp specific sensor driver. With the latest atomisp code from: https://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux.git/tag/?h=media-atomisp-6.5-1 The atomisp code can now work with standard v4l2 sensor drivers using the selections (crop-tgt) api and v4l2-async sensor driver registration. This patch series modifies the main drivers/media/i2c/ov2680.c driver to add bugfixes, ACPI enumeration, selection API support and further improvments. After this the driver can be used with the atomisp driver and atomisp-ov2680.c can be dropped. This also gets the driver much closer to having everything needed for use with IPU3 / libcamera. I have a Lenovo Miix 510 now with an IPU3 + ov2680 sensor and I plan to work on this soonish. This series consist of 3 parts: 1. Patches 0-7 are bugfixes these are put first for backporting 2.1 Patch 8 adds the new CCI register helpers, these are being reviewed here: https://lore.kernel.org/linux-media/20230606165808.70751-2-hdegoede@xxxxxxxxxx/ the intend is to merge that patch separately before this series. This patch is only here so that the series actually compiles. 2.2 Patch 9 converts the ov2680 driver to the new CCI helpers, the same has been done in the other series with the atomisp-ov2680 driver and this makes it much easier to sync things up 3. Patches 10 - 28 implement the ACPI enumeration, selection API support and further improvments. Regards, Hans Hans de Goede (28): media: ov2680: Remove auto-gain and auto-exposure controls media: ov2680: Fix ov2680_bayer_order() media: ov2680: Fix vflip / hflip set functions media: ov2680: Use select VIDEO_V4L2_SUBDEV_API media: ov2680: Don't take the lock for try_fmt calls media: ov2680: Add ov2680_fill_format() helper function media: ov2680: Fix ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY not working media: Add MIPI CCI register access helper functions media: ov2680: Convert to new CCI register access helpers media: ov2680: Store dev instead of i2c_client in ov2680_dev media: ov2680: Check for "powerdown" GPIO con-id before checking for "reset" GPIO con-id media: ov2680: Add runtime-pm support media: ov2680: Drop is_enabled flag media: ov2680: Add support for more clk setups media: ov2680: Add support for 19.2 MHz clock media: ov2680: Add endpoint matching support media: ov2680: Add support for ACPI enumeration media: ov2680: Fix ov2680_enum_frame_interval() media: ov2680: Annotate the per mode register setting lists media: ov2680: Add ov2680_mode struct media: ov2680: Make setting the mode algorithm based media: ov2680: Add an __ov2680_get_pad_format() helper function media: ov2680: Implement selection support media: ov2680: Fix exposure and gain ctrls range and default value media: ov2680: Add a bunch of register tweaks media: ov2680: Add g_skip_frames op support media: ov2680: Drop unnecessary pad checks media: ov2680: Read and log sensor revision during probe Documentation/driver-api/media/v4l2-cci.rst | 5 + Documentation/driver-api/media/v4l2-core.rst | 1 + drivers/media/i2c/Kconfig | 2 + drivers/media/i2c/ov2680.c | 1251 +++++++++--------- drivers/media/v4l2-core/Kconfig | 5 + drivers/media/v4l2-core/Makefile | 1 + drivers/media/v4l2-core/v4l2-cci.c | 142 ++ include/media/v4l2-cci.h | 109 ++ 8 files changed, 889 insertions(+), 627 deletions(-) create mode 100644 Documentation/driver-api/media/v4l2-cci.rst create mode 100644 drivers/media/v4l2-core/v4l2-cci.c create mode 100644 include/media/v4l2-cci.h -- 2.40.1
