Use the new comon CCI register access helpers to replace the private
register access helpers in the ov2680 driver.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/media/i2c/Kconfig | 1 +
drivers/media/i2c/ov2680.c | 207 +++++++++----------------------------
2 files changed, 47 insertions(+), 161 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 791473fcbad3..d17b52e390e1 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -435,6 +435,7 @@ config VIDEO_OV2680
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
+ select V4L2_CCI
help
This is a Video4Linux2 sensor driver for the OmniVision
OV2680 camera.
diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
index ffdc7c06a361..dc57052336b3 100644
--- a/drivers/media/i2c/ov2680.c
+++ b/drivers/media/i2c/ov2680.c
@@ -10,7 +10,6 @@
*
*/
-#include <asm/unaligned.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
@@ -21,38 +20,34 @@
#include <linux/gpio/consumer.h>
#include <linux/regulator/consumer.h>
+#include <media/v4l2-cci.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-subdev.h>
-#define OV2680_XVCLK_VALUE 24000000
+#define OV2680_XVCLK_VALUE 24000000
-#define OV2680_CHIP_ID 0x2680
+#define OV2680_CHIP_ID 0x2680
-#define OV2680_REG_STREAM_CTRL 0x0100
-#define OV2680_REG_SOFT_RESET 0x0103
+#define OV2680_REG_STREAM_CTRL CCI_REG8(0x0100)
+#define OV2680_REG_SOFT_RESET CCI_REG8(0x0103)
-#define OV2680_REG_CHIP_ID_HIGH 0x300a
-#define OV2680_REG_CHIP_ID_LOW 0x300b
+#define OV2680_REG_CHIP_ID CCI_REG16(0x300a)
-#define OV2680_REG_R_MANUAL 0x3503
-#define OV2680_REG_GAIN_PK 0x350a
-#define OV2680_REG_EXPOSURE_PK_HIGH 0x3500
-#define OV2680_REG_TIMING_HTS 0x380c
-#define OV2680_REG_TIMING_VTS 0x380e
-#define OV2680_REG_FORMAT1 0x3820
-#define OV2680_REG_FORMAT2 0x3821
+#define OV2680_REG_EXPOSURE_PK CCI_REG24(0x3500)
+#define OV2680_REG_R_MANUAL CCI_REG8(0x3503)
+#define OV2680_REG_GAIN_PK CCI_REG16(0x350a)
+#define OV2680_REG_TIMING_HTS CCI_REG16(0x380c)
+#define OV2680_REG_TIMING_VTS CCI_REG16(0x380e)
+#define OV2680_REG_FORMAT1 CCI_REG8(0x3820)
+#define OV2680_REG_FORMAT2 CCI_REG8(0x3821)
-#define OV2680_REG_ISP_CTRL00 0x5080
+#define OV2680_REG_ISP_CTRL00 CCI_REG8(0x5080)
-#define OV2680_FRAME_RATE 30
+#define OV2680_FRAME_RATE 30
-#define OV2680_REG_VALUE_8BIT 1
-#define OV2680_REG_VALUE_16BIT 2
-#define OV2680_REG_VALUE_24BIT 3
-
-#define OV2680_WIDTH_MAX 1600
-#define OV2680_HEIGHT_MAX 1200
+#define OV2680_WIDTH_MAX 1600
+#define OV2680_HEIGHT_MAX 1200
#define OV2680_DEFAULT_WIDTH 800
#define OV2680_DEFAULT_HEIGHT 600
@@ -64,11 +59,6 @@ enum ov2680_mode_id {
OV2680_MODE_MAX,
};
-struct reg_value {
- u16 reg_addr;
- u8 val;
-};
-
static const char * const ov2680_supply_name[] = {
"DOVDD",
"DVDD",
@@ -82,7 +72,7 @@ struct ov2680_mode_info {
enum ov2680_mode_id id;
u32 width;
u32 height;
- const struct reg_value *reg_data;
+ const struct reg_sequence *reg_data;
u32 reg_data_size;
};
@@ -97,6 +87,7 @@ struct ov2680_ctrls {
struct ov2680_dev {
struct i2c_client *i2c_client;
+ struct regmap *regmap;
struct v4l2_subdev sd;
struct media_pad pad;
@@ -133,7 +124,7 @@ static const int ov2680_hv_flip_bayer_order[] = {
MEDIA_BUS_FMT_SRGGB10_1X10,
};
-static const struct reg_value ov2680_setting_30fps_QUXGA_800_600[] = {
+static const struct reg_sequence ov2680_setting_30fps_QUXGA_800_600[] = {
{0x3086, 0x01}, {0x370a, 0x23}, {0x3808, 0x03}, {0x3809, 0x20},
{0x380a, 0x02}, {0x380b, 0x58}, {0x380c, 0x06}, {0x380d, 0xac},
{0x380e, 0x02}, {0x380f, 0x84}, {0x3811, 0x04}, {0x3813, 0x04},
@@ -142,14 +133,14 @@ static const struct reg_value ov2680_setting_30fps_QUXGA_800_600[] = {
{0x3503, 0x03},
};
-static const struct reg_value ov2680_setting_30fps_720P_1280_720[] = {
+static const struct reg_sequence ov2680_setting_30fps_720P_1280_720[] = {
{0x3086, 0x00}, {0x3808, 0x05}, {0x3809, 0x00}, {0x380a, 0x02},
{0x380b, 0xd0}, {0x380c, 0x06}, {0x380d, 0xa8}, {0x380e, 0x05},
{0x380f, 0x0e}, {0x3811, 0x08}, {0x3813, 0x06}, {0x3814, 0x11},
{0x3815, 0x11}, {0x3820, 0xc0}, {0x4008, 0x00},
};
-static const struct reg_value ov2680_setting_30fps_UXGA_1600_1200[] = {
+static const struct reg_sequence ov2680_setting_30fps_UXGA_1600_1200[] = {
{0x3086, 0x00}, {0x3501, 0x4e}, {0x3502, 0xe0}, {0x3808, 0x06},
{0x3809, 0x40}, {0x380a, 0x04}, {0x380b, 0xb0}, {0x380c, 0x06},
{0x380d, 0xa8}, {0x380e, 0x05}, {0x380f, 0x0e}, {0x3811, 0x00},
@@ -191,115 +182,6 @@ static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
ctrls.handler)->sd;
}
-static int __ov2680_write_reg(struct ov2680_dev *sensor, u16 reg,
- unsigned int len, u32 val)
-{
- struct i2c_client *client = sensor->i2c_client;
- u8 buf[6];
- int ret;
-
- if (len > 4)
- return -EINVAL;
-
- put_unaligned_be16(reg, buf);
- put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
- ret = i2c_master_send(client, buf, len + 2);
- if (ret != len + 2) {
- dev_err(&client->dev, "write error: reg=0x%4x: %d\n", reg, ret);
- return -EIO;
- }
-
- return 0;
-}
-
-#define ov2680_write_reg(s, r, v) \
- __ov2680_write_reg(s, r, OV2680_REG_VALUE_8BIT, v)
-
-#define ov2680_write_reg16(s, r, v) \
- __ov2680_write_reg(s, r, OV2680_REG_VALUE_16BIT, v)
-
-#define ov2680_write_reg24(s, r, v) \
- __ov2680_write_reg(s, r, OV2680_REG_VALUE_24BIT, v)
-
-static int __ov2680_read_reg(struct ov2680_dev *sensor, u16 reg,
- unsigned int len, u32 *val)
-{
- struct i2c_client *client = sensor->i2c_client;
- struct i2c_msg msgs[2];
- u8 addr_buf[2] = { reg >> 8, reg & 0xff };
- u8 data_buf[4] = { 0, };
- int ret;
-
- if (len > 4)
- return -EINVAL;
-
- msgs[0].addr = client->addr;
- msgs[0].flags = 0;
- msgs[0].len = ARRAY_SIZE(addr_buf);
- msgs[0].buf = addr_buf;
-
- msgs[1].addr = client->addr;
- msgs[1].flags = I2C_M_RD;
- msgs[1].len = len;
- msgs[1].buf = &data_buf[4 - len];
-
- ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (ret != ARRAY_SIZE(msgs)) {
- dev_err(&client->dev, "read error: reg=0x%4x: %d\n", reg, ret);
- return -EIO;
- }
-
- *val = get_unaligned_be32(data_buf);
-
- return 0;
-}
-
-#define ov2680_read_reg(s, r, v) \
- __ov2680_read_reg(s, r, OV2680_REG_VALUE_8BIT, v)
-
-#define ov2680_read_reg16(s, r, v) \
- __ov2680_read_reg(s, r, OV2680_REG_VALUE_16BIT, v)
-
-#define ov2680_read_reg24(s, r, v) \
- __ov2680_read_reg(s, r, OV2680_REG_VALUE_24BIT, v)
-
-static int ov2680_mod_reg(struct ov2680_dev *sensor, u16 reg, u8 mask, u8 val)
-{
- u32 readval;
- int ret;
-
- ret = ov2680_read_reg(sensor, reg, &readval);
- if (ret < 0)
- return ret;
-
- readval &= ~mask;
- val &= mask;
- val |= readval;
-
- return ov2680_write_reg(sensor, reg, val);
-}
-
-static int ov2680_load_regs(struct ov2680_dev *sensor,
- const struct ov2680_mode_info *mode)
-{
- const struct reg_value *regs = mode->reg_data;
- unsigned int i;
- int ret = 0;
- u16 reg_addr;
- u8 val;
-
- for (i = 0; i < mode->reg_data_size; ++i, ++regs) {
- reg_addr = regs->reg_addr;
- val = regs->val;
-
- ret = ov2680_write_reg(sensor, reg_addr, val);
- if (ret)
- break;
- }
-
- return ret;
-}
-
static void ov2680_power_up(struct ov2680_dev *sensor)
{
if (!sensor->reset_gpio)
@@ -350,7 +232,8 @@ static int ov2680_set_vflip(struct ov2680_dev *sensor, s32 val)
if (sensor->is_streaming)
return -EBUSY;
- ret = ov2680_mod_reg(sensor, OV2680_REG_FORMAT1, BIT(2), val ? BIT(2) : 0);
+ ret = cci_update_bits(sensor->regmap, OV2680_REG_FORMAT1, BIT(2),
+ val ? BIT(2) : 0, NULL);
if (ret < 0)
return ret;
@@ -365,7 +248,8 @@ static int ov2680_set_hflip(struct ov2680_dev *sensor, s32 val)
if (sensor->is_streaming)
return -EBUSY;
- ret = ov2680_mod_reg(sensor, OV2680_REG_FORMAT2, BIT(2), val ? BIT(2) : 0);
+ ret = cci_update_bits(sensor->regmap, OV2680_REG_FORMAT2, BIT(2),
+ val ? BIT(2) : 0, NULL);
if (ret < 0)
return ret;
@@ -375,47 +259,43 @@ static int ov2680_set_hflip(struct ov2680_dev *sensor, s32 val)
static int ov2680_test_pattern_set(struct ov2680_dev *sensor, int value)
{
- int ret;
+ int ret = 0;
if (!value)
- return ov2680_mod_reg(sensor, OV2680_REG_ISP_CTRL00, BIT(7), 0);
+ return cci_update_bits(sensor->regmap, OV2680_REG_ISP_CTRL00, BIT(7), 0, NULL);
- ret = ov2680_mod_reg(sensor, OV2680_REG_ISP_CTRL00, 0x03, value - 1);
- if (ret < 0)
- return ret;
+ cci_update_bits(sensor->regmap, OV2680_REG_ISP_CTRL00, 0x03, value - 1, &ret);
+ cci_update_bits(sensor->regmap, OV2680_REG_ISP_CTRL00, BIT(7), BIT(7), &ret);
- ret = ov2680_mod_reg(sensor, OV2680_REG_ISP_CTRL00, BIT(7), BIT(7));
- if (ret < 0)
- return ret;
-
- return 0;
+ return ret;
}
static int ov2680_gain_set(struct ov2680_dev *sensor, u32 gain)
{
- return ov2680_write_reg16(sensor, OV2680_REG_GAIN_PK, gain);
+ return cci_write(sensor->regmap, OV2680_REG_GAIN_PK, gain, NULL);
}
static int ov2680_exposure_set(struct ov2680_dev *sensor, u32 exp)
{
- return ov2680_write_reg24(sensor, OV2680_REG_EXPOSURE_PK_HIGH, exp << 4);
+ return cci_write(sensor->regmap, OV2680_REG_EXPOSURE_PK, exp << 4, NULL);
}
static int ov2680_stream_enable(struct ov2680_dev *sensor)
{
- return ov2680_write_reg(sensor, OV2680_REG_STREAM_CTRL, 1);
+ return cci_write(sensor->regmap, OV2680_REG_STREAM_CTRL, 1, NULL);
}
static int ov2680_stream_disable(struct ov2680_dev *sensor)
{
- return ov2680_write_reg(sensor, OV2680_REG_STREAM_CTRL, 0);
+ return cci_write(sensor->regmap, OV2680_REG_STREAM_CTRL, 0, NULL);
}
static int ov2680_mode_set(struct ov2680_dev *sensor)
{
int ret;
- ret = ov2680_load_regs(sensor, sensor->current_mode);
+ ret = cci_multi_reg_write(sensor->regmap, sensor->current_mode->reg_data,
+ sensor->current_mode->reg_data_size, NULL);
if (ret < 0)
return ret;
@@ -433,7 +313,8 @@ static int ov2680_mode_restore(struct ov2680_dev *sensor)
{
int ret;
- ret = ov2680_load_regs(sensor, &ov2680_mode_init_data);
+ ret = cci_multi_reg_write(sensor->regmap, ov2680_mode_init_data.reg_data,
+ ov2680_mode_init_data.reg_data_size, NULL);
if (ret < 0)
return ret;
@@ -468,7 +349,7 @@ static int ov2680_power_on(struct ov2680_dev *sensor)
}
if (!sensor->reset_gpio) {
- ret = ov2680_write_reg(sensor, OV2680_REG_SOFT_RESET, 0x01);
+ ret = cci_write(sensor->regmap, OV2680_REG_SOFT_RESET, 0x01, NULL);
if (ret != 0) {
dev_err(dev, "sensor soft reset failed\n");
return ret;
@@ -835,9 +716,9 @@ static int ov2680_check_id(struct ov2680_dev *sensor)
ov2680_power_on(sensor);
- ret = ov2680_read_reg16(sensor, OV2680_REG_CHIP_ID_HIGH, &chip_id);
+ ret = cci_read(sensor->regmap, OV2680_REG_CHIP_ID, &chip_id, NULL);
if (ret < 0) {
- dev_err(dev, "failed to read chip id high\n");
+ dev_err(dev, "failed to read chip id\n");
return -ENODEV;
}
@@ -891,6 +772,10 @@ static int ov2680_probe(struct i2c_client *client)
sensor->i2c_client = client;
+ sensor->regmap = cci_regmap_init_i2c(client, 16);
+ if (IS_ERR(sensor->regmap))
+ return PTR_ERR(sensor->regmap);
+
ret = ov2680_parse_dt(sensor);
if (ret < 0)
return -EINVAL;
--
2.40.1
