Re: [RFC 1/5] media: dt-bindings: Document 'location' property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pavel,

On Sun, Sep 01, 2019 at 07:24:15PM +0200, Pavel Machek wrote:
> > > +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
> > > @@ -89,6 +89,10 @@ Optional properties
> > >    but a number of degrees counter clockwise. Typical values are 0 and 180
> > >    (upside down).
> > > 
> > > +- location: The camera device mounting position, relative to the device
> > > +  usage orientation. Possible values are:
> > > +  0 - Front camera. The image sensor is mounted on the front side of the device.
> > > +  1 - Back camera. The image sensor is mounted on the back side of the device.
> > 
> > Would it make sense to make this a little more generic? Such as s/image
> > sensor/ device/, for instance?
> > 
> > Is this also relevant for flash or lens devices?
> > 
> > Flash (torch) devices could be present, at least principle, without a
> > camera. There once was even such a Nokia phone, 1100 unless I'm mistaken.
> > :-)
> 
> Well, I'd call them LEDs, not camera flashes ... if there's no camera. And IIRC 
> these devices had LEDs on top of the phone... so neither front nor back side.

I would go for the name "torch" in that case. It really depends on the
device, but in any case, the torch LEDs would have a location (and we
would possibly need to expand this property to
include the top, bottom, left and right sides).

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux