Add the 'location' device property, used to specify the camera device mounting position. The property is particularly meaningful for mobile devices with a well defined usage orientation. Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx> --- Documentation/devicetree/bindings/media/video-interfaces.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index f884ada0bffc..819077b2649c 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -89,6 +89,10 @@ Optional properties but a number of degrees counter clockwise. Typical values are 0 and 180 (upside down). +- location: The camera device mounting position, relative to the device + usage orientation. Possible values are: + 0 - Front camera. The image sensor is mounted on the front side of the device. + 1 - Back camera. The image sensor is mounted on the back side of the device. Optional endpoint properties ---------------------------- -- 2.22.0
