Hi, Am Montag, den 30.11.2009, 14:35 -0800 schrieb Dominic Fernandes: > Hi Hermann, > > There is a sign of life coming from the card (I connected my SAT finder and got a loud tone from it). > > > You might want to set dvb_powerdown_on_sleep=0 for dvb_core. > > How do you specify this and which file (saa7134-dvb.c or saa7134-core.c or some other file)? as said above, you set it for dvb_core. > I tried Kaffeine, to scan Astra 19.2 but no luck, at first I can see the signal meters light up and then stop. The output from dmesg at this point shows: > > [ 72.944834] DVB: registering adapter 0 frontend 0 (Zarlink ZL10313 DVB-S)... > [ 2183.208025] DVB: adapter 0 frontend 0 frequency 7401500 out of range (950000..2150000) > [ 2191.756534] DVB: adapter 0 frontend 0 frequency 7401500 out of range (950000..2150000) > [ 2195.908528] DVB: adapter 0 frontend 0 frequency 7401500 out of range (950000..2150000) > > > Not sure what this means. Nothing good at all. Likely there is some breakage in the maths across devices/modules, often caused by different xtals/oscillators not sufficiently covered yet. For sure enough to get you out of the game for now. If Richard's card still works with latest v4l-dvb and his patch, likely you have slightly different hardware covered by the same driver too, including to hit a freq calculation bug exclusively. Can't tell from your input. The eeproms of yours and Richard's card differ in byte 0x74 and 0x75. Don't know what that means. Cheers, Hermann -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html