Hi Hermann, Thanks for responding. I managed to do the compile and install this time without errors on a fresh copy of the v4l-dvb drivers. However, from the thread (link) it said Changing the PCI Vendor ID to 0x7133 in the S350 patch, - which file and location would specify this? At the moment the dvb-s card is recognised as the compro T750 card (I made the other mod of changing the gpio to xc000 in saa7134-cards): 6.008121] saa7130/34: v4l2 driver version 0.2.15 loaded [ 6.008173] saa7134 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.008180] saa7133[0]: found at 0000:03:01.0, rev: 209, irq: 17, latency: 64, mmio: 0xcfcff000 [ 6.008186] saa7133[0]: subsystem: 185b:c900, board: Compro VideoMate T750 [card=139,autodetected] [ 6.008200] saa7133[0]: board init: gpio is 843f00 [ 6.008205] IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 6.160030] saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 6.160052] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 6.160071] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff [ 6.160091] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.160109] saa7133[0]: i2c eeprom 40: ff d6 00 c0 86 1c 02 01 02 ff ff ff ff ff ff ff [ 6.160133] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb [ 6.160144] saa7133[0]: i2c eeprom 60: 35 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.160156] saa7133[0]: i2c eeprom 70: 00 00 00 01 4e c1 ff ff ff ff ff ff ff ff ff ff [ 6.160167] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.160178] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.160190] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.160201] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.160212] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.160223] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.160235] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.160246] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.313949] saa7133[0]: registered device video0 [v4l2] [ 6.313978] saa7133[0]: registered device vbi0 [ 6.314003] saa7133[0]: registered device radio0 thanks, Dominic ----- Original Message ---- From: hermann pitton <hermann-pitton@xxxxxxxx> To: Dominic Fernandes <dalf198@xxxxxxxxx> Cc: linux-media@xxxxxxxxxxxxxxx Sent: Tue, November 24, 2009 1:12:54 AM Subject: Re: Compile error saa7134 - compro videomate S350 Hi Dominic, Am Montag, den 23.11.2009, 10:01 -0800 schrieb Dominic Fernandes: > Hi, > > I need help to compile v4l-dvb drivers for saa7134 modules. > I'm new to v4l-dvb not sure how to get past the errors concerning > undefined declarations found in saa7134-inputs.c file for the videomate > S350 board, saying ir_codes, mask_keycodes, mask_keydown as undeclared: > > snip:- > > make[2]: Entering directory `/usr/src/linux-headers-2.6.31-14-generic' > CC [M] /home/tvbox/v4l-dvb/v4l/saa7134-input.o > /home/tvbox/v4l-dvb/v4l/saa7134-input.c: In function 'build_key': > /home/tvbox/v4l-dvb/v4l/saa7134-input.c:90: error: 'ir_codes' undeclared (first use in this function) > /home/tvbox/v4l-dvb/v4l/saa7134-input.c:90: error: (Each undeclared identifier is reported only once > /home/tvbox/v4l-dvb/v4l/saa7134-input.c:90: error: for each function it appears in.) > /home/tvbox/v4l-dvb/v4l/saa7134-input.c:90: error: 'ir_codes_videomate_s350' undeclared (first use in this function) > /home/tvbox/v4l-dvb/v4l/saa7134-input.c:91: error: 'mask_keycode' undeclared (first use in this function) > /home/tvbox/v4l-dvb/v4l/saa7134-input.c:92: error: 'mask_keydown' undeclared (first use in this function) > make[3]: *** [/home/tvbox/v4l-dvb/v4l/saa7134-input.o] Error 1 > make[2]: *** [_module_/home/tvbox/v4l-dvb/v4l] Error 2 > make[2]: Leaving directory `/usr/src/linux-headers-2.6.31-14-generic' > make[1]: *** [default] Error 2 > make[1]: Leaving directory `/home/tvbox/v4l-dvb/v4l' > make: *** [all] Error 2 > > background: > Justbought last week a new compro videomate s350 (dvb-s) card after seeing > some positive feedback on forumes saying it is working. But the card I > got has a newer chip set incorporating a saa7135 device and after some > searching found someone else also had the same issue back in June but > managed to fix it with a few changes. I trying to re-produce the > actions (see link below) and re-build the drivers but I'm stuck at the > compile stage (make all). > > http://osdir.com/ml/linux-media/2009-06/msg01256.html > > Can someone advise me on how get past the make error? > > Thanks, > Dominic > hm, likely you are on some older/other stuff. Igor had some merge conflict previously for the S350. Can't see it with current linuxtv.org mercurial v4l-dvb. Please try with that. Cheers, Hermann -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
