On Wed, Oct 14, 2009 at 10:06 AM, Giuseppe Borzi <gborzi@xxxxxxxxx> wrote: > Hello Devin, > I did as you suggested. Unplugged the stick reboot and plug it again. > And just to be sure I did it two times. Now the device works, but it is > unable to change channel. That is to say, when I use the command "vlc > channels.conf" it tunes to the first station in the channel file and > can't change it. Other apps (xine, kaffeine) that seems to change to > the latest channel don't work at all. The dmesg output after plugging > the driver is in attach. In dmesg I noticed lines like this > > [drm] TV-14: set mode NTSC 480i 0 > > I suppose this hasn't anything to do with the analog audio problem, but > just to be sure I ask you. Also, using arecord/aplay for analog audio I > get an "underrun" error message > > arecord -D hw:1,0 -r 32000 -c 2 -f S16_LE | aplay - > Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 32000 Hz, > Stereo Playing WAVE 'stdin' : Signed 16 bit Little Endian, Rate 32000 > Hz, Stereo underrun!!! (at least -1255527098942.108 ms long) > > Cheers. Ok, let me look at the code and see what I can figure out. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
