Hello all, I have setup a tree that removes the mode switching code when starting/stopping streaming. If you have one of the em28xx dvb devices mentioned in the previous thread and volunteered to test, please try out the following tree: http://kernellabs.com/hg/~dheitmueller/em28xx-modeswitch In particular, this should work for those of you who reported problems with zl10353 based devices like the Pinnacle 320e (or Dazzle) and were using that one line change I sent this week. It should also work with Antti's Reddo board without needing his patch to move the demod reset into the tuner_gpio. This also brings us one more step forward to setting up the locking properly so that applications cannot simultaneously open the analog and dvb side of the device. Thanks for your help, Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html