Devin Heitmueller <dheitmueller <at> kernellabs.com> writes: > > Hello all, > > I have setup a tree that removes the mode switching code when > starting/stopping streaming. If you have one of the em28xx dvb > devices mentioned in the previous thread and volunteered to test, > please try out the following tree: > > http://kernellabs.com/hg/~dheitmueller/em28xx-modeswitch > > In particular, this should work for those of you who reported problems > with zl10353 based devices like the Pinnacle 320e (or Dazzle) and were > using that one line change I sent this week. It should also work with > Antti's Reddo board without needing his patch to move the demod reset > into the tuner_gpio. > > This also brings us one more step forward to setting up the locking > properly so that applications cannot simultaneously open the analog > and dvb side of the device. > > Thanks for your help, > > Devin > Tested your tree with a EM2882_BOARD_TERRATEC_HYBRID_XS (0x0ccd, 0x005e) in digital mode. It works fine, now I can successfully switch between DVB channels, while with the official tree channel switching doesn't work. I'm using MPlayer. Regards, Francesco -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
