> Did you run "make unload" before you plugged in the device? > > Do me a favor - unplug the device, reboot the PC, plug it back in and > see if it still happens. I just want to be sure this isn't some sort > of issue with conflict between the new and old modules before I debug > this any further. > > Thanks, > > Devin > Hello Devin, I did as you suggested. Unplugged the stick reboot and plug it again. And just to be sure I did it two times. Now the device works, but it is unable to change channel. That is to say, when I use the command "vlc channels.conf" it tunes to the first station in the channel file and can't change it. Other apps (xine, kaffeine) that seems to change to the latest channel don't work at all. The dmesg output after plugging the driver is in attach. In dmesg I noticed lines like this [drm] TV-14: set mode NTSC 480i 0 I suppose this hasn't anything to do with the analog audio problem, but just to be sure I ask you. Also, using arecord/aplay for analog audio I get an "underrun" error message arecord -D hw:1,0 -r 32000 -c 2 -f S16_LE | aplay - Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 32000 Hz, Stereo Playing WAVE 'stdin' : Signed 16 bit Little Endian, Rate 32000 Hz, Stereo underrun!!! (at least -1255527098942.108 ms long) Cheers. -- *********************************************************** Giuseppe Borzi, Assistant Professor at the University of Messina - Department of Civil Engineering Address: Contrada di Dio, Messina, I-98166, Italy Tel: +390903977323 Fax: +390903977480 email: gborzi@xxxxxxxx url: http://ww2.unime.it/dic/gborzi/index.php ***********************************************************
usb 1-3.1: new high speed USB device using ehci_hcd and address 7 usb 1-3.1: configuration #1 chosen from 1 choice Linux video capture interface: v2.00 em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) em28xx #0: chip ID is em2882/em2883 em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00 em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20 em28xx #0: EEPROM info: em28xx #0: AC97 audio (5 sample rates) em28xx #0: USB Remote wakeup capable em28xx #0: 500mA max power em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) em28xx #0: Your board has no unique USB ID. em28xx #0: A hint were successfully done, based on eeprom hash. em28xx #0: This method is not 100% failproof. em28xx #0: If the board were missdetected, please email this log to: em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx> em28xx #0: Board detected as Pinnacle Hybrid Pro tvp5150 2-005c: chip found @ 0xb8 (em28xx #0) tuner 2-0061: chip found @ 0xc2 (em28xx #0) xc2028 2-0061: creating new instance xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner usb 1-3.1: firmware: requesting xc3028-v27.fw xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000. xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700. SCODE (20000000), id 000000000000b700: xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. em28xx #0: Config register raw data: 0x58 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected tvp5150 2-005c: tvp5150am1 detected. em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as /dev/video0 em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx audio device (eb1a:2881): interface 1, class 1 em28xx audio device (eb1a:2881): interface 2, class 1 usbcore: registered new interface driver em28xx em28xx driver loaded usbcore: registered new interface driver snd-usb-audio tvp5150 2-005c: tvp5150am1 detected. xc2028 2-0061: attaching existing instance xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner em28xx #0/2: xc3028 attached DVB: registering new adapter (em28xx #0) DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... Successfully loaded em28xx-dvb Em28xx: Initialized (Em28xx dvb Extension) extension
