Devin, I put the commands you suggested into /etc/modules as I can't seem to get the expresscard slot to hotplug. I wonder if the line I found may have something to do with both problems. In the full output of dmesg I found "Warning! ehci_hcd should always be loaded before uhci_pcd and ohci_pcd, not after." Here is the md5sum output: "thomas@toshiba:~$ md5sum /lib/firmware/xc* 293dc5e915d9a0f74a368f8a2ce3cc10 /lib/firmware/xc3028-v27.fw" Here is the full dmesg output after trying to scan for channels: thomas@toshiba:~$ sudo scan /usr/share/doc/dvb-utils/examples/scan/atsc/us-ATSC-center-frequencies-8VSB [sudo] password for thomas: scanning /usr/share/doc/dvb-utils/examples/scan/atsc/us-ATSC-center-frequencies-8VSB using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 16 Device or resource busy thomas@toshiba:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-11-generic (buildd@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:28:32 UTC 2009 (Ubuntu 2.6.27-11.27-generic) [ 0.000000] Command line: root=UUID=86e1e836-d4a6-436a-b0de-46e937be9a64 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000d7e70000 (usable) [ 0.000000] BIOS-e820: 00000000d7e70000 - 00000000d7e83000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d7e83000 - 00000000d7e85000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000d7e85000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xd7e70 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00d7e00000 page 2M [ 0.000000] 00d7e00000 - 00d7e70000 page 4k [ 0.000000] kernel direct mapping tables up to d7e70000 @ 8000-e000 [ 0.000000] last_map_addr: d7e70000 end: d7e70000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000 [ 0.000000] last_map_addr: 120000000 end: 120000000 [ 0.000000] RAMDISK: 377a7000 - 37fef1d1 [ 0.000000] ACPI: RSDP 000F7260, 0024 (r2 TOSCPL) [ 0.000000] ACPI: XSDT D7E7AA18, 0064 (r1 TOSCPL TOSCPL00 6040000 LTP 0) [ 0.000000] ACPI: FACP D7E828F7, 00F4 (r3 TOSCPL Herring 6040000 ATI F4240) [ 0.000000] ACPI: DSDT D7E7AA7C, 7E7B (r1 TOSCPL SB600 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS D7E84FC0, 0040 [ 0.000000] ACPI: TCPA D7E82A5F, 0032 (r2 TOSCPL 6040000 PTEC 0) [ 0.000000] ACPI: SLIC D7E82A91, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) [ 0.000000] ACPI: SSDT D7E82C07, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC D7E82E0D, 0054 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG D7E82E61, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET D7E82E9D, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: ASF! D7E82ED5, 012B (r32 DMA AMDTBL 6040000 PTL 1) [ 0.000000] ACPI: DMI detected: Toshiba [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [000000000000d000 - 0000000000030fff] pages 24 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b9f5c] TEXT DATA BSS ==> [0000200000 - 00008b9f5c] [ 0.000000] #3 [00377a7000 - 0037fef1d1] RAMDISK ==> [00377a7000 - 0037fef1d1] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f7300] 000f7300 [ 0.000000] [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880028200000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000d7e70 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1015309 [ 0.000000] DMA zone: 2104 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 863920 pages, LIFO batch:31 [ 0.000000] Normal zone: 129024 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000d7e70000 - 00000000d7e83000 [ 0.000000] PM: Registered nosave memory: 00000000d7e83000 - 00000000d7e85000 [ 0.000000] PM: Registered nosave memory: 00000000d7e85000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995048 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=86e1e836-d4a6-436a-b0de-46e937be9a64 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using PMTIMER reference calibration [ 0.000000] Detected 1895.242 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ 264000000 size 32 MB [ 0.004000] Aperture beyond 4GB. Ignoring. [ 0.004000] Your BIOS doesn't leave a aperture memory hole [ 0.004000] Please enable the IOMMU option in the BIOS setup [ 0.004000] This costs you 64 MB of RAM [ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.004000] Memory: 3916464k/4718592k available (3116k kernel code, 144772k reserved, 1575k data, 540k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3790.48 BogoMIPS (lpj=7580968) [ 0.004039] Security Framework initialized [ 0.004046] SELinux: Disabled at boot. [ 0.004061] AppArmor: AppArmor initialized [ 0.004541] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.007571] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008889] Mount-cache hash table entries: 256 [ 0.009127] Initializing cgroup subsys ns [ 0.009132] Initializing cgroup subsys cpuacct [ 0.009135] Initializing cgroup subsys memory [ 0.009154] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.009157] CPU: L2 Cache: 512K (64 bytes/line) [ 0.009160] CPU 0/0 -> Node 0 [ 0.009162] tseg: 00d7f00000 [ 0.009163] CPU: Physical Processor ID: 0 [ 0.009165] CPU: Processor Core ID: 0 [ 0.009176] using C1E aware idle routine [ 0.010991] ACPI: Core revision 20080609 [ 0.013996] ACPI: Checking initramfs for custom DSDT [ 0.408466] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.412025] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.412025] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.412025] ..... (found apic 0 pin 0) ... [ 0.455153] ....... works. [ 0.455154] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02 [ 0.455158] Using local APIC timer interrupts. [ 0.456030] APIC timer calibration result 12468721 [ 0.456032] Detected 12.468 MHz APIC timer. [ 0.456211] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3790.53 BogoMIPS (lpj=7581071) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.544188] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02 [ 0.544216] Brought up 2 CPUs [ 0.544218] Total of 2 processors activated (7581.01 BogoMIPS). [ 0.544058] System has AMD C1E enabled [ 0.544068] Switch to broadcast mode on CPU1 [ 0.544264] CPU0 attaching sched-domain: [ 0.544267] domain 0: span 0-1 level CPU [ 0.544270] groups: 0 1 [ 0.544273] domain 1: span 0-1 level NODE [ 0.544275] groups: 0-1 [ 0.544281] CPU1 attaching sched-domain: [ 0.544282] domain 0: span 0-1 level CPU [ 0.544284] groups: 1 0 [ 0.544288] domain 1: span 0-1 level NODE [ 0.544290] groups: 0-1 [ 0.544388] Switch to broadcast mode on CPU0 [ 0.544388] net_namespace: 1552 bytes [ 0.544388] Booting paravirtualized kernel on bare hardware [ 0.544388] Time: 8:31:23 Date: 02/28/09 [ 0.544410] NET: Registered protocol family 16 [ 0.544436] node 0 link 0: io port [1000, fffff] [ 0.544436] TOM: 00000000e0000000 aka 3584M [ 0.544436] node 0 link 0: mmio [f8300000, ffffffff] [ 0.544436] node 0 link 0: mmio [f8200000, f82fffff] [ 0.544436] node 0 link 0: mmio [f8000000, f81fffff] [ 0.544436] node 0 link 0: mmio [f0000000, f7ffffff] [ 0.544436] node 0 link 0: mmio [a0000, bffff] [ 0.544436] node 0 link 0: mmio [f0000000, efffffff] [ 0.544436] node 0 link 0: mmio [e0000000, efffffff] [ 0.544436] node 0 link 0: mmio [e0000000, dfffffff] [ 0.544436] TOM2: 0000000120000000 aka 4608M [ 0.544436] bus: [00,ff] on node 0 link 0 [ 0.544436] bus: 00 index 0 io port: [0, ffff] [ 0.544436] bus: 00 index 1 mmio: [e0000000, ffffffff] [ 0.544436] bus: 00 index 2 mmio: [a0000, bffff] [ 0.544436] bus: 00 index 3 mmio: [120000000, fcffffffff] [ 0.544436] ACPI: bus type pci registered [ 0.544436] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 29 [ 0.544436] PCI: MCFG area at e0000000 reserved in E820 [ 0.545712] PCI: Using MMCONFIG at e0000000 - e1dfffff [ 0.545714] PCI: Using configuration type 1 for base access [ 0.548966] ACPI: EC: Look up EC in DSDT [ 0.551720] ACPI Error (evregion-0315): No handler for Region [ERAM] (ffff88011fa35d80) [EmbeddedControl] [20080609] [ 0.551726] ACPI Error (exfldio-0291): Region EmbeddedControl(3) has no handler [20080609] [ 0.551732] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.HTEV] (Node ffff88011fa335c0), AE_NOT_EXIST [ 0.551780] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._REG] (Node ffff88011fa3b960), AE_NOT_EXIST [ 0.554363] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.556693] ACPI: Interpreter enabled [ 0.556697] ACPI: (supports S0 S3 S4 S5) [ 0.556713] ACPI: Using IOAPIC for interrupt routing [ 0.560049] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.632565] ACPI: EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62 [ 0.632565] ACPI: EC: driver started in interrupt mode [ 0.632565] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.632565] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.632565] pci 0000:00:05.0: PME# disabled [ 0.632565] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.632565] pci 0000:00:06.0: PME# disabled [ 0.632565] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.632565] pci 0000:00:07.0: PME# disabled [ 0.632565] PCI: 0000:00:12.0 reg 10 io port: [8440, 8447] [ 0.632565] PCI: 0000:00:12.0 reg 14 io port: [8434, 8437] [ 0.632565] PCI: 0000:00:12.0 reg 18 io port: [8438, 843f] [ 0.632565] PCI: 0000:00:12.0 reg 1c io port: [8430, 8433] [ 0.632565] PCI: 0000:00:12.0 reg 20 io port: [8400, 840f] [ 0.632565] PCI: 0000:00:12.0 reg 24 32bit mmio: [f8909000, f89093ff] [ 0.632565] pci 0000:00:12.0: set SATA to AHCI mode [ 0.632565] PCI: 0000:00:13.0 reg 10 32bit mmio: [f8904000, f8904fff] [ 0.632565] PCI: 0000:00:13.1 reg 10 32bit mmio: [f8905000, f8905fff] [ 0.632565] PCI: 0000:00:13.2 reg 10 32bit mmio: [f8906000, f8906fff] [ 0.632565] PCI: 0000:00:13.3 reg 10 32bit mmio: [f8907000, f8907fff] [ 0.632565] PCI: 0000:00:13.4 reg 10 32bit mmio: [f8908000, f8908fff] [ 0.632597] PCI: 0000:00:13.5 reg 10 32bit mmio: [f8909400, f89094ff] [ 0.632645] pci 0000:00:13.5: supports D1 [ 0.632646] pci 0000:00:13.5: supports D2 [ 0.632648] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.632653] pci 0000:00:13.5: PME# disabled [ 0.632685] PCI: 0000:00:14.0 reg 10 io port: [8410, 841f] [ 0.632745] PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7] [ 0.632752] PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7] [ 0.632760] PCI: 0000:00:14.1 reg 18 io port: [0, 7] [ 0.632767] PCI: 0000:00:14.1 reg 1c io port: [0, 3] [ 0.632774] PCI: 0000:00:14.1 reg 20 io port: [8420, 842f] [ 0.632827] PCI: 0000:00:14.2 reg 10 64bit mmio: [f8900000, f8903fff] [ 0.632868] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.632872] pci 0000:00:14.2: PME# disabled [ 0.633054] PCI: 0000:01:05.0 reg 10 64bit mmio: [f0000000, f7ffffff] [ 0.633060] PCI: 0000:01:05.0 reg 18 64bit mmio: [f8300000, f830ffff] [ 0.633064] PCI: 0000:01:05.0 reg 20 io port: [9000, 90ff] [ 0.633068] PCI: 0000:01:05.0 reg 24 32bit mmio: [f8200000, f82fffff] [ 0.633077] pci 0000:01:05.0: supports D1 [ 0.633079] pci 0000:01:05.0: supports D2 [ 0.633093] PCI: bridge 0000:00:01.0 io port: [9000, 9fff] [ 0.633096] PCI: bridge 0000:00:01.0 32bit mmio: [f8200000, f83fffff] [ 0.633100] PCI: bridge 0000:00:01.0 64bit mmio pref: [f0000000, f7ffffff] [ 0.633151] PCI: 0000:0b:00.0 reg 10 64bit mmio: [f8000000, f81fffff] [ 0.633227] pci 0000:0b:00.0: supports D1 [ 0.633229] pci 0000:0b:00.0: supports D2 [ 0.633231] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot [ 0.633237] pci 0000:0b:00.0: PME# disabled [ 0.633284] PCI: bridge 0000:00:05.0 32bit mmio: [f8000000, f81fffff] [ 0.633331] PCI: 0000:11:00.0 reg 10 io port: [a000, a0ff] [ 0.633349] PCI: 0000:11:00.0 reg 18 64bit mmio: [f8500000, f8500fff] [ 0.633368] PCI: 0000:11:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.633385] pci 0000:11:00.0: supports D1 [ 0.633387] pci 0000:11:00.0: supports D2 [ 0.633389] pci 0000:11:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.633394] pci 0000:11:00.0: PME# disabled [ 0.633439] PCI: bridge 0000:00:06.0 io port: [a000, afff] [ 0.633442] PCI: bridge 0000:00:06.0 32bit mmio: [f8500000, f85fffff] [ 0.633484] PCI: 0000:17:00.0 reg 10 64bit mmio: [f8400000, f840ffff] [ 0.633574] PCI: bridge 0000:00:07.0 32bit mmio: [f8400000, f84fffff] [ 0.633627] PCI: 0000:1d:04.0 reg 10 32bit mmio: [f8604000, f8604fff] [ 0.633648] pci 0000:1d:04.0: supports D1 [ 0.633649] pci 0000:1d:04.0: supports D2 [ 0.633651] pci 0000:1d:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.633657] pci 0000:1d:04.0: PME# disabled [ 0.633697] PCI: 0000:1d:04.1 reg 10 32bit mmio: [f8606000, f86067ff] [ 0.633706] PCI: 0000:1d:04.1 reg 14 32bit mmio: [f8600000, f8603fff] [ 0.633760] pci 0000:1d:04.1: supports D1 [ 0.633762] pci 0000:1d:04.1: supports D2 [ 0.633764] pci 0000:1d:04.1: PME# supported from D0 D1 D2 D3hot [ 0.633770] pci 0000:1d:04.1: PME# disabled [ 0.633808] PCI: 0000:1d:04.2 reg 10 32bit mmio: [f8605000, f8605fff] [ 0.633867] pci 0000:1d:04.2: supports D1 [ 0.633868] pci 0000:1d:04.2: supports D2 [ 0.633870] pci 0000:1d:04.2: PME# supported from D0 D1 D2 D3hot [ 0.633876] pci 0000:1d:04.2: PME# disabled [ 0.633914] PCI: 0000:1d:04.3 reg 10 32bit mmio: [f8606800, f86068ff] [ 0.633973] pci 0000:1d:04.3: supports D1 [ 0.633975] pci 0000:1d:04.3: supports D2 [ 0.633977] pci 0000:1d:04.3: PME# supported from D0 D1 D2 D3hot [ 0.633982] pci 0000:1d:04.3: PME# disabled [ 0.634034] pci 0000:00:14.4: transparent bridge [ 0.634042] PCI: bridge 0000:00:14.4 32bit mmio: [f8600000, f86fffff] [ 0.634086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.634395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.634589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 0.634651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 0.634651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT] [ 0.634651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.634651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.640273] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 0.640401] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 0.640592] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.640702] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 0.640702] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 0.640702] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 0.640702] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.640877] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 0.644178] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.644205] pnp: PnP ACPI init [ 0.644205] ACPI: bus type pnp registered [ 0.676262] pnp: PnP ACPI: found 11 devices [ 0.676265] ACPI: ACPI bus type pnp unregistered [ 0.680066] PCI: Using ACPI for IRQ routing [ 0.688042] NET: Registered protocol family 8 [ 0.688045] NET: Registered protocol family 20 [ 0.692041] NetLabel: Initializing [ 0.692041] NetLabel: domain hash size = 128 [ 0.692041] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.692057] NetLabel: unlabeled traffic allowed by default [ 0.692200] PCI-DMA: Disabling AGP. [ 0.692353] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.692353] PCI-DMA: using GART IOMMU. [ 0.692353] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.692714] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.692722] hpet0: 4 32-bit timers, 14318180 Hz [ 0.695094] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.695096] actual entries 65586 [ 0.695226] AppArmor: AppArmor Filesystem Enabled [ 0.695257] ACPI: RTC can wake from S4 [ 0.696052] Switched to high resolution mode on CPU 0 [ 0.696066] Switched to high resolution mode on CPU 1 [ 0.705056] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.705059] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.705071] system 00:08: ioport range 0x1080-0x1080 has been reserved [ 0.705075] system 00:08: ioport range 0x220-0x22f has been reserved [ 0.705078] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.705080] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.705083] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.705086] system 00:08: ioport range 0x530-0x537 has been reserved [ 0.705088] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.705091] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.705094] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 0.705096] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.705099] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.705102] system 00:08: ioport range 0xcd0-0xcd1 has been reserved [ 0.705106] system 00:08: ioport range 0xcd2-0xcd3 has been reserved [ 0.705109] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 0.705112] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.705115] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 0.705118] system 00:08: ioport range 0x8000-0x805f has been reserved [ 0.705121] system 00:08: ioport range 0xf40-0xf47 has been reserved [ 0.705124] system 00:08: ioport range 0x87f-0x87f has been reserved [ 0.705127] system 00:08: ioport range 0xfd60-0xfddf has been reserved [ 0.705134] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.705137] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.710566] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.710569] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.710573] pci 0000:00:01.0: MEM window: 0xf8200000-0xf83fffff [ 0.710576] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff [ 0.710581] pci 0000:00:05.0: PCI bridge, secondary bus 0000:0b [ 0.710583] pci 0000:00:05.0: IO window: disabled [ 0.710586] pci 0000:00:05.0: MEM window: 0xf8000000-0xf81fffff [ 0.710588] pci 0000:00:05.0: PREFETCH window: disabled [ 0.710593] pci 0000:00:06.0: PCI bridge, secondary bus 0000:11 [ 0.710596] pci 0000:00:06.0: IO window: 0xa000-0xafff [ 0.710599] pci 0000:00:06.0: MEM window: 0xf8500000-0xf85fffff [ 0.710602] pci 0000:00:06.0: PREFETCH window: 0x000000f8700000-0x000000f87fffff [ 0.710606] pci 0000:00:07.0: PCI bridge, secondary bus 0000:17 [ 0.710608] pci 0000:00:07.0: IO window: disabled [ 0.710611] pci 0000:00:07.0: MEM window: 0xf8400000-0xf84fffff [ 0.710614] pci 0000:00:07.0: PREFETCH window: disabled [ 0.710621] pci 0000:1d:04.0: CardBus bridge, secondary bus 0000:1e [ 0.710623] pci 0000:1d:04.0: IO window: 0x002000-0x0020ff [ 0.710632] pci 0000:1d:04.0: IO window: 0x002400-0x0024ff [ 0.710637] pci 0000:1d:04.0: PREFETCH window: 0x120000000-0x123ffffff [ 0.710642] pci 0000:1d:04.0: MEM window: 0x124000000-0x127ffffff [ 0.710648] pci 0000:00:14.4: PCI bridge, secondary bus 0000:1d [ 0.710651] pci 0000:00:14.4: IO window: 0x2000-0x2fff [ 0.710657] pci 0000:00:14.4: MEM window: 0xf8600000-0xf86fffff [ 0.710662] pci 0000:00:14.4: PREFETCH window: 0x00000120000000-0x00000123ffffff [ 0.710679] pci 0000:00:05.0: setting latency timer to 64 [ 0.710684] pci 0000:00:06.0: setting latency timer to 64 [ 0.710690] pci 0000:00:07.0: setting latency timer to 64 [ 0.710711] pci 0000:1d:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.710717] bus: 00 index 0 io port: [0, ffff] [ 0.710719] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.710722] bus: 01 index 0 io port: [9000, 9fff] [ 0.710724] bus: 01 index 1 mmio: [f8200000, f83fffff] [ 0.710726] bus: 01 index 2 mmio: [f0000000, f7ffffff] [ 0.710728] bus: 01 index 3 mmio: [0, 0] [ 0.710729] bus: 0b index 0 mmio: [0, 0] [ 0.710731] bus: 0b index 1 mmio: [f8000000, f81fffff] [ 0.710733] bus: 0b index 2 mmio: [0, 0] [ 0.710735] bus: 0b index 3 mmio: [0, 0] [ 0.710737] bus: 11 index 0 io port: [a000, afff] [ 0.710739] bus: 11 index 1 mmio: [f8500000, f85fffff] [ 0.710741] bus: 11 index 2 mmio: [f8700000, f87fffff] [ 0.710742] bus: 11 index 3 mmio: [0, 0] [ 0.710744] bus: 17 index 0 mmio: [0, 0] [ 0.710746] bus: 17 index 1 mmio: [f8400000, f84fffff] [ 0.710748] bus: 17 index 2 mmio: [0, 0] [ 0.710750] bus: 17 index 3 mmio: [0, 0] [ 0.710752] bus: 1d index 0 io port: [2000, 2fff] [ 0.710754] bus: 1d index 1 mmio: [f8600000, f86fffff] [ 0.710756] bus: 1d index 2 mmio: [120000000, 123ffffff] [ 0.710758] bus: 1d index 3 io port: [0, ffff] [ 0.710759] bus: 1d index 4 mmio: [0, ffffffffffffffff] [ 0.710762] bus: 1e index 0 io port: [2000, 20ff] [ 0.710763] bus: 1e index 1 io port: [2400, 24ff] [ 0.710766] bus: 1e index 2 mmio: [120000000, 123ffffff] [ 0.710768] bus: 1e index 3 mmio: [124000000, 127ffffff] [ 0.710783] NET: Registered protocol family 2 [ 0.749197] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.750802] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.755574] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.756194] TCP: Hash tables configured (established 524288 bind 65536) [ 0.756198] TCP reno registered [ 0.765128] NET: Registered protocol family 1 [ 0.765264] checking if image is initramfs... it is [ 1.529642] Freeing initrd memory: 8480k freed [ 1.536373] audit: initializing netlink socket (disabled) [ 1.536388] type=2000 audit(1235809882.536:1): initialized [ 1.542764] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.546327] VFS: Disk quotas dquot_6.5.1 [ 1.546453] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.546599] msgmni has been set to 7665 [ 1.546766] io scheduler noop registered [ 1.546768] io scheduler anticipatory registered [ 1.546770] io scheduler deadline registered [ 1.546955] io scheduler cfq registered (default) [ 1.547065] pci 0000:01:05.0: Boot video device [ 1.547233] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 1.547255] pcieport-driver 0000:00:05.0: found MSI capability [ 1.547280] pci_express 0000:00:05.0:pcie00: allocate port service [ 1.547356] pci_express 0000:00:05.0:pcie02: allocate port service [ 1.547424] pci_express 0000:00:05.0:pcie03: allocate port service [ 1.547525] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 1.547545] pcieport-driver 0000:00:06.0: found MSI capability [ 1.547565] pci_express 0000:00:06.0:pcie00: allocate port service [ 1.547646] pci_express 0000:00:06.0:pcie03: allocate port service [ 1.547746] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 1.547766] pcieport-driver 0000:00:07.0: found MSI capability [ 1.547787] pci_express 0000:00:07.0:pcie00: allocate port service [ 1.547858] pci_express 0000:00:07.0:pcie03: allocate port service [ 1.600838] hpet_resources: 0xfed00000 is busy [ 1.600925] Linux agpgart interface v0.103 [ 1.600930] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.604478] brd: module loaded [ 1.604586] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.604777] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.641664] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.641673] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.657189] mice: PS/2 mouse device common for all mice [ 1.657369] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.657397] rtc0: alarms up to one month, hpet irqs [ 1.657460] cpuidle: using governor ladder [ 1.657462] cpuidle: using governor menu [ 1.657875] TCP cubic registered [ 1.658173] registered taskstats version 1 [ 1.658351] Magic number: 13:403:524 [ 1.658514] rtc_cmos 00:04: setting system clock to 2009-02-28 08:31:25 UTC (1235809885) [ 1.658517] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.658519] EDD information not available. [ 1.658578] Freeing unused kernel memory: 540k freed [ 1.658859] Write protecting the kernel read-only data: 4352k [ 1.682148] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.844227] fuse init (API version 7.9) [ 1.960304] ACPI: processor limited to max C-state 1 [ 1.960425] processor ACPI0007:00: registered as cooling_device0 [ 1.960431] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.960540] processor ACPI0007:01: registered as cooling_device1 [ 2.277073] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.277100] r8169 0000:11:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.277121] r8169 0000:11:00.0: setting latency timer to 64 [ 2.277470] eth0: RTL8101e at 0xffffc20000644000, 00:1e:ec:00:9e:6a, XID 34200000 IRQ 2300 [ 2.317394] No dock devices found. [ 2.357129] usbcore: registered new interface driver usbfs [ 2.357160] usbcore: registered new interface driver hub [ 2.357231] usbcore: registered new device driver usb [ 2.359627] SCSI subsystem initialized [ 2.374576] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.374622] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.374638] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.374695] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 2.374741] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8904000 [ 2.377241] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 2.408962] libata version 3.00 loaded. [ 2.429254] usb usb1: configuration #1 chosen from 1 choice [ 2.429287] hub 1-0:1.0: USB hub found [ 2.429303] hub 1-0:1.0: 2 ports detected [ 2.533332] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.533353] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.533388] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 2.533423] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8905000 [ 2.589240] usb usb2: configuration #1 chosen from 1 choice [ 2.589272] hub 2-0:1.0: USB hub found [ 2.589288] hub 2-0:1.0: 2 ports detected [ 2.693335] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.693356] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 2.693388] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 2.693422] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8906000 [ 2.749238] usb usb3: configuration #1 chosen from 1 choice [ 2.749269] hub 3-0:1.0: USB hub found [ 2.749286] hub 3-0:1.0: 2 ports detected [ 2.957311] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.957330] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 2.957360] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 2.957383] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8907000 [ 3.013236] usb usb4: configuration #1 chosen from 1 choice [ 3.013268] hub 4-0:1.0: USB hub found [ 3.013285] hub 4-0:1.0: 2 ports detected [ 3.092041] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 3.118310] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.118328] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 3.118359] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 3.118380] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8908000 [ 3.172178] usb usb5: configuration #1 chosen from 1 choice [ 3.172210] hub 5-0:1.0: USB hub found [ 3.172225] hub 5-0:1.0: 2 ports detected [ 3.259839] usb 3-1: configuration #1 chosen from 1 choice [ 3.277250] ahci 0000:00:12.0: version 3.0 [ 3.277274] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3.277303] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 3.277391] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 3.277394] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part [ 3.277776] scsi0 : ahci [ 3.277922] scsi1 : ahci [ 3.278019] scsi2 : ahci [ 3.278105] scsi3 : ahci [ 3.278235] ata1: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909100 irq 22 [ 3.278240] ata2: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909180 irq 22 [ 3.278243] ata3: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909200 irq 22 [ 3.278247] ata4: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909280 irq 22 [ 3.984040] ata1: softreset failed (device not ready) [ 3.984046] ata1: failed due to HW bug, retry pmp=0 [ 4.148049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.542078] ata1.00: ATA-8: TOSHIBA MK1646GSX, LB113M, max UDMA/100 [ 4.542082] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.542094] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 4.542933] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 4.542937] ata1.00: configured for UDMA/100 [ 4.876047] ata2: SATA link down (SStatus 0 SControl 300) [ 5.216052] ata3: SATA link down (SStatus 0 SControl 300) [ 5.552054] ata4: SATA link down (SStatus 0 SControl 300) [ 5.568160] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5 [ 5.568380] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.568397] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 5.568440] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 5.568478] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 5.568497] ehci_hcd 0000:00:13.5: debug port 1 [ 5.568523] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8909400 [ 5.571216] usb 3-1: USB disconnect, address 2 [ 5.581032] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.581165] usb usb6: configuration #1 chosen from 1 choice [ 5.581199] hub 6-0:1.0: USB hub found [ 5.581211] hub 6-0:1.0: 10 ports detected [ 5.789882] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.789918] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 5.790028] scsi4 : pata_atiixp [ 5.791572] scsi5 : pata_atiixp [ 5.792722] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14 [ 5.792725] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15 [ 5.952515] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WT03, max UDMA/33 [ 5.968455] ata5.00: configured for UDMA/33 [ 6.108033] usb 3-1: new low speed USB device using ohci_hcd and address 3 [ 6.137569] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WT03 PQ: 0 ANSI: 5 [ 6.141158] ohci1394 0000:1d:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 6.190972] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[f8606000-f86067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 6.220986] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.221038] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 6.268979] Driver 'sd' needs updating - please use bus_type methods [ 6.269126] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 6.269145] sd 0:0:0:0: [sda] Write Protect is off [ 6.269148] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.269176] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.269259] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 6.269275] sd 0:0:0:0: [sda] Write Protect is off [ 6.269277] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.269304] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.269308] sda:usb 3-1: configuration #1 chosen from 1 choice [ 6.279979] usbcore: registered new interface driver hiddev [ 6.280833] Driver 'sr' needs updating - please use bus_type methods [ 6.284432] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:13.2/usb3/3-1/3-1:1.0/input/input2 [ 6.308216] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.2-1 [ 6.308241] usbcore: registered new interface driver usbhid [ 6.308244] usbhid: v2.6:USB HID core driver [ 6.380907] sda1 sda2 sda3 < sda5 sda6> [ 6.416009] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.435347] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.435355] Uniform CD-ROM driver Revision: 3.20 [ 6.435486] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 6.896145] PM: Starting manual resume from disk [ 6.896149] PM: Resume from partition 8:6 [ 6.896151] PM: Checking hibernation image. [ 6.896377] PM: Resume from disk failed. [ 6.963371] kjournald starting. Commit interval 5 seconds [ 6.963386] EXT3-fs: mounted filesystem with ordered data mode. [ 7.465167] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f81c2404ccc] [ 12.872155] udevd version 124 started [ 13.204203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.256294] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.282596] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 13.309058] ACPI: Power Button (FF) [PWRF] [ 13.309206] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 13.309315] ACPI: Lid Switch [LID] [ 13.309401] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 13.341049] ACPI: Power Button (CM) [PWRB] [ 13.443522] ACPI: AC Adapter [ACAD] (on-line) [ 13.463238] acpi device:29: registered as cooling_device2 [ 13.463525] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:26/device:27/input/input6 [ 13.480054] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.731625] ath_hal: module license 'Proprietary' taints kernel. [ 13.765240] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 13.806821] ACPI: Battery Slot [BAT1] (battery present) [ 13.833202] wlan: 0.9.4 [ 13.869278] ath_pci: 0.9.4 [ 13.869335] ath_pci 0000:17:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 13.869345] ath_pci 0000:17:00.0: setting latency timer to 64 [ 13.893749] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13) [ 13.893765] ath_pci 0000:17:00.0: PCI INT A disabled [ 14.078833] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0 [ 14.089882] Linux video capture interface: v2.00 [ 14.401241] cx23885 driver version 0.0.1 loaded [ 14.401304] cx23885 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 14.401443] CORE cx23885[0]: subsystem: 0070:7717, board: Hauppauge WinTV-HVR1500 [card=6,autodetected] [ 14.631477] tveeprom 1-0050: Hauppauge model 77001, rev D4C0, serial# 2396878 [ 14.631482] tveeprom 1-0050: MAC address is 00-0D-FE-24-92-CE [ 14.631485] tveeprom 1-0050: tuner model is Xceive XC3028 (idx 120, type 71) [ 14.631488] tveeprom 1-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) [ 14.631491] tveeprom 1-0050: audio processor is CX23885 (idx 39) [ 14.631493] tveeprom 1-0050: decoder processor is CX23885 (idx 33) [ 14.631495] tveeprom 1-0050: has no radio [ 14.631497] cx23885[0]: hauppauge eeprom: model=77001 [ 14.631501] cx23885_dvb_register() allocating 1 frontend(s) [ 14.652404] cx23885[0]: cx23885 based dvb card [ 14.728356] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 14.866740] sdhci: Secure Digital Host Controller Interface driver [ 14.866744] sdhci: Copyright(c) Pierre Ossman [ 15.004955] xc2028 2-0061: creating new instance [ 15.004960] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner [ 15.004968] DVB: registering new adapter (cx23885[0]) [ 15.004972] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... [ 15.005445] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 15.005454] cx23885[0]/0: found at 0000:0b:00.0, rev: 2, irq: 17, latency: 0, mmio: 0xf8000000 [ 15.005462] cx23885 0000:0b:00.0: setting latency timer to 64 [ 15.009027] tifm_7xx1 0000:1d:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 15.009519] sdhci-pci 0000:1d:04.3: SDHCI controller found [104c:803c] (rev 0) [ 15.009532] sdhci-pci 0000:1d:04.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 15.009605] mmc0: SDHCI controller on PCI [0000:1d:04.3] using DMA [ 15.012650] Yenta: CardBus bridge found at 0000:1d:04.0 [1179:ff00] [ 15.012672] Yenta: Enabling burst memory read transactions [ 15.012677] Yenta: Using CSCINT to route CSC interrupts to PCI [ 15.012679] Yenta: Routing CardBus interrupts to PCI [ 15.012685] Yenta TI: socket 0000:1d:04.0, mfunc 0x10a01b22, devctl 0x64 [ 15.249217] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 [ 15.249222] Socket status: 30000006 [ 15.249225] Yenta: Raising subordinate bus# of parent bus (#1d) from #1e to #21 [ 15.249231] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 15.249283] pcmcia: parent PCI bridge Memory window: 0xf8600000 - 0xf86fffff [ 15.249286] pcmcia: parent PCI bridge Memory window: 0x120000000 - 0x123ffffff [ 15.488961] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.531684] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 15.903817] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000 [ 15.997172] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 16.887313] lp: driver loaded but no devices found [ 17.127481] Adding 2072344k swap on /dev/sda6. Priority:-1 extents:1 across:2072344k [ 17.691536] EXT3 FS on sda5, internal journal [ 18.970850] type=1505 audit(1235831502.319:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4309 [ 18.971092] type=1505 audit(1235831502.319:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4309 [ 19.079119] type=1505 audit(1235831502.427:4): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4313 [ 19.253732] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.944597] ACPI: WMI: Mapper loaded [ 20.364382] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 processors (2 cpu cores) (version 2.20.00) [ 20.364447] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x12 [ 20.364451] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13 [ 20.364453] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 [ 20.364455] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 21.273379] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 24.126362] ppdev: user-space parallel port driver [ 25.072852] NET: Registered protocol family 10 [ 25.073370] lo: Disabled Privacy Extensions [ 26.501050] Clocksource tsc unstable (delta = -146065408 ns) [ 29.764250] Bluetooth: Core ver 2.13 [ 29.767489] NET: Registered protocol family 31 [ 29.767503] Bluetooth: HCI device and connection manager initialized [ 29.767512] Bluetooth: HCI socket layer initialized [ 29.825428] Bluetooth: L2CAP ver 2.11 [ 29.825445] Bluetooth: L2CAP socket layer initialized [ 29.909958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 29.909983] Bluetooth: BNEP filters: protocol multicast [ 29.992551] Bridge firewalling registered [ 30.029192] Bluetooth: SCO (Voice Link) ver 0.6 [ 30.029208] Bluetooth: SCO socket layer initialized [ 30.102480] Bluetooth: RFCOMM socket layer initialized [ 30.102736] Bluetooth: RFCOMM TTY layer initialized [ 30.102742] Bluetooth: RFCOMM ver 1.10 [ 31.783725] pci 0000:01:05.0: power state changed by ACPI to D0 [ 31.783761] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 32.157643] [drm] Initialized drm 1.1.0 20060810 [ 32.176763] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 32.832715] [drm] Setting GART location based on new memory map [ 32.833786] [drm] Loading RS690 Microcode [ 32.833818] [drm] Num pipes: 1 [ 32.833829] [drm] writeback test succeeded in 1 usecs [ 34.365896] r8169: eth0: link up [ 34.365923] r8169: eth0: link up [ 34.547487] NET: Registered protocol family 17 [ 44.620161] eth0: no IPv6 routers present [ 90.086383] hda-intel: Invalid position buffer, using LPIB read method instead. thomas@toshiba:~$ dmesg | grep error thomas@toshiba:~$ dmesg | grep warning [ 21.273379] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) thomas@toshiba:~$ dmesg | grep Warning [ 2.377241] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after Here is what /etc/modules looks like, the only lines I added are the tuner and cx23885 lines: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. fuse lp rtc sbp2 tuner_xc2028 no_poweroff=1 debug=1 cx23885 i2c_scan=1 Thanks for any help, Tom > Date: Tue, 17 Feb 2009 15:56:00 -0500 > Subject: Re: HVR-1500 tuner seems to be recognized, but wont turn on. > From: devin.heitmueller@xxxxxxxxx > To: nickotym@xxxxxxxxxxx > CC: linux-media@xxxxxxxxxxxxxxx > > 2009/2/17 Thomas Nicolai : >> >> I will try those suggestions this evening. did he feel this should be done in addition to the modprobe tunerxc-2028 no_poweroff=1 debug=1 ? > > Please do both commands. That way we will get both sets of debugging > messages and you only have to do the capture once. > > Regards, > > Devin > > -- > Devin J. Heitmueller > http://www.devinheitmueller.com > AIM: devinheitmueller _________________________________________________________________ Windows Live™: Life without walls. http://windowslive.com/explore?ocid=TXT_TAGLM_WL_allup_1a_explore_032009 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html