HVR-1500 tuner seems to be recognized, but wont turn on.‏

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Third time is  the charm, had tried posting before, but was in HTML.  Hope it doesn't double post for anyone.


I am hoping this problem has already been solved, but I couldn't find anything mentioned in the archives going back a while.

I am running Kubuntu 8.10 with 2.6.27-11-generic on a Toshiba laptop with dual AMD 64 processors.  

I
installed the drivers from the non-experimental ones at www.linuxtv.org
using mercurial and that helped with some problems.  However, the tuner
is now recognized, but can't seem to turn on when called for by MythTV
or dvbscan.  

 Partial Results of dmesg follow:

[ 2627.107174] firmware: requesting xc3028-v27.fw
[ 2627.147757] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 2627.347546] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 2627.870877] xc2028 2-0061: i2c output error: rc = -5 (should be 4)
[ 2627.870886] xc2028 2-0061: -5 returned from send
[ 2627.870890] xc2028 2-0061: Error -22 while loading base firmware
[ 2628.122478] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 2628.645956] xc2028 2-0061: i2c output error: rc = -5 (should be 4)
[ 2628.645962] xc2028 2-0061: -5 returned from send
[ 2628.645965] xc2028 2-0061: Error -22 while loading base firmware
[ 2629.845869] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 2630.368229] xc2028 2-0061: i2c output error: rc = -5 (should be 4)
[ 2630.368235] xc2028 2-0061: -5 returned from send
[ 2630.368239] xc2028 2-0061: Error -22 while loading base firmware
[ 2630.622469] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 2631.144810] xc2028 2-0061: i2c output error: rc = -5 (should be 4)
[ 2631.144818] xc2028 2-0061: -5 returned from send
[ 2631.144820] xc2028 2-0061: Error -22 while loading base firmware
[ 2632.150462] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 2632.679257] xc2028 2-0061: i2c output error: rc = -5 (should be 4)
[ 2632.679266] xc2028 2-0061: -5 returned from send
[ 2632.679270] xc2028 2-0061: Error -22 while loading base firmware
[ 2632.930465] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 2634.086084] xc2028 2-0061: Loading firmware for type=D2633 DTV6 ATSC (10030), id 0000000000000000.


lspci -vnn results (partial):

01:05.0
VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon
X1200 Series]
[1002:791f]                                                         
        Subsystem: Toshiba America Info Systems Device [1179:ff00]              
        Flags: bus master, fast devsel, latency 64, IRQ 18                      
        Memory at f0000000 (64-bit, prefetchable) [size=128M]                   
        Memory at f8300000 (64-bit, non-prefetchable) [size=64K]                
        I/O ports at 9000 [size=256]                                            
        Memory at f8200000 (32-bit, non-prefetchable) [size=1M]                 
        Capabilities:                                            

0b:00.0
Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI
Video and Audio Decoder [14f1:8852] (rev
02)                                     
        Subsystem: Hauppauge computer works Inc. Device [0070:7717]             
        Flags: bus master, fast devsel, latency 0, IRQ 17                       
        Memory at f8000000 (64-bit, non-prefetchable) [size=2M]                 
        Capabilities:                                            
        Kernel driver in use: cx23885                                           
        Kernel modules: cx23885                                                 

Please let me know what else might be needed to solve this.

Saw a link that recommended using v4l-dvb-experimental  drivers but wasn't sure if that was wise.


Thanks, 

Nick


_________________________________________________________________
Windows Live™: Keep your life in sync. 
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t1_allup_howitworks_022009
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux