2009/2/17 Thomas Nicolai <nickotym@xxxxxxxxxxx>: > > Here is the pertinent part of the dmesg I got tonight: > > dmesg > > 407.155095] firmware: requesting xc3028-v27.fw > [ 407.248329] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 > [ 407.447731] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. > [ 407.970376] xc2028 1-0061: i2c output error: rc = -5 (should be 4) > [ 407.970385] xc2028 1-0061: -5 returned from send > [ 407.970390] xc2028 1-0061: Error -22 while loading base firmware > [ 408.222453] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. > [ 408.744786] xc2028 1-0061: i2c output error: rc = -5 (should be 4) > [ 408.744791] xc2028 1-0061: -5 returned from send > [ 408.744793] xc2028 1-0061: Error -22 while loading base firmware > [ 409.945750] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. > [ 411.102083] xc2028 1-0061: Loading firmware for type=D2633 DTV6 ATSC (10030), id 0000000000000000. > > > ---------------------------------------- >> From: nickotym@xxxxxxxxxxx >> To: devin.heitmueller@xxxxxxxxx >> CC: linux-media@xxxxxxxxxxxxxxx >> Subject: RE: HVR-1500 tuner seems to be recognized, but wont turn on. >> Date: Sat, 14 Feb 2009 12:05:09 -0600 >> >> >> >> >> >>> That looks really suspicious. Perhaps the xc3028 tuner is being put >>> to sleep and not being woken up properly. >>> >>> Could you please post the full dmesg output showing the initialization >>> of the device? >>> >>> Devin >> >> >> I turned kubuntu on, shut off the backend for mythtv and then did a scan using dvbscan. >> >> Here is the full dmesg output, sorry it is long I wanted to include it all in case i missed anything.: >> >> >> dmesg >> > > > _________________________________________________________________ > Windows Live™: Keep your life in sync. > http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t1_allup_howitworks_022009 > Sorry for not getting back to you sooner. I don't claim to know much about this card, but there was a relatively recent change where the tuner gets put to sleep, which might explain why you are having i2c communication failures. Try the following: <unplug the card> make unload modprobe tuner-xc2028 no_poweroff=1 debug=1 <plug in the card> <see if it starts working> If that doesn't work, send the dmesg output. Devin -- Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
