On Thu, Jan 14, 2016 at 3:05 PM, Roberto Alejandro Espi Munoz
<raespi@xxxxxxx> wrote:
Yes the uinput driver is compiled as a module and loaded before
running the
test app that I have (double checked with modprobe and lsmod). The
same
code has been compiled for my laptop and everything loads and works
fine
when sending events to the input subsystem. I mentioned the physical
keyboard issue because that's what made it work: SCENARIO1 the headless
motherboard starts without a keyboard and both the module and the
app loads
but no events get injected and the problem occurs when writing to the
/dev/uinput device, SCENARIO2 I connect a physical keyboard and all
goes
well. I looked at the libevdev before and sinced my code ended up
working on
my laptop I discarded the library. I saw the libevdev-uinput.c you
recommended, I think I'm following the same rationale.
Thanks for the replies ...
This is the code I'm using that fails at the end when writing to the
/dev/uinput device:
int uinputDev;
struct uinput_user_dev device;
memset(&device, 0, sizeof device);
uinputDev = open("/dev/uinput",O_WRONLY | O_NONBLOCK);
strcpy(device.name,"test remote");
device.id.bustype=BUS_USB;
device.id.vendor=1;
device.id.product=1;
device.id.version=1;
if (write(uinputDev,&device,sizeof(device)) != sizeof(device))
{
fprintf(stderr, "error setup\n");
}
if (ioctl(uinputDev,UI_SET_EVBIT,EV_KEY) < 0)
fprintf(stderr, "error evbit key\n");
if (ioctl(uinputDev,UI_SET_KEYBIT, KEY_LEFT) < 0)
fprintf(stderr, "error evbit key\n");
if (ioctl(uinputDev,UI_SET_KEYBIT, KEY_UP) < 0)
fprintf(stderr, "error evbit key\n");
if (ioctl(uinputDev,UI_SET_KEYBIT, KEY_DOWN) < 0)
fprintf(stderr, "error evbit key\n");
if (ioctl(uinputDev,UI_SET_KEYBIT, KEY_RIGHT) < 0)
fprintf(stderr, "error evbit key\n");
if (ioctl(uinputDev,UI_SET_KEYBIT, KEY_ENTER) < 0)
fprintf(stderr, "error evbit key\n");
if (ioctl(uinputDev,UI_DEV_CREATE) < 0)
{
fprintf(stderr, "error create\n");
}
struct input_event event;
Just to be sure, is there any sleep here or way to ensure your
motherboard actually opened the device here?
If not, you might simply send the events too early, when nobody reads
them, and thus you think you did not receive them.
Cheers,
Benjamin
memset(&event, 0, sizeof(event));
event.type = EV_KEY;
event.code = KEY_UP;
event.value = 1;
gettimeofday(&event.time,NULL);
if (write( uinputDev, &event, sizeof(struct input_event)) !=
sizeof(
struct input_event) ) {
fprintf(stderr, "Error on send_event");
return -1;
}
memset(&event, 0, sizeof(event));
event.type = EV_KEY;
event.code = KEY_UP;
event.value = 0;
gettimeofday(&event.time,NULL);
if (write( uinputDev, &event, sizeof(struct input_event)) !=
sizeof(
struct input_event) ) {
fprintf(stderr, "Error on send_event");
return -1;
}
On 01/14/2016 12:08 AM, Benjamin Tissoires wrote:
Hi Roberto,
On Wed, Jan 13, 2016 at 11:21 PM, Dmitry Torokhov
<dmitry.torokhov@xxxxxxxxx> wrote:
Hi Roberto,
On Wed, Jan 13, 2016 at 09:19:39AM -0500, Roberto Alejandro Espi
Munoz
wrote:
Hello ... I've been searching around the web for a specific mailing
list for the uinput driver but couldn't find any. I managed to
create an example app that injects keyboard events to the running
linux kernel succesfully when I have a keyboard attached to the
computer. However if I run it on a keyboardless machine, like a
standalone motherboard, the uinput device fails to open.
uinput driver does not depend on presence of a physical keyboard. I'd
start looking whether uinput module is enabled on your headless
box and
if it is a module verify that it is loaded.
As Dmitry said, uinput is independent of any attached hardware.
You might want to see how we managed to create new devices through
uinput by looking at libevdev[1] (see libevdev/libevdev-uinput.c).
You might actually also want to use libevdev instead of manually doing
the ioctls and processing of all the small things :)
Cheers,
Benjamin
[1] http://www.freedesktop.org/wiki/Software/libevdev/
--
To unsubscribe from this list: send the line "unsubscribe
linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe
linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
