This started as a series to add support for buffers and the new BME688 but it ended up being just a cleaning series. These might be quite some patches for such a thing but I feel that they are are well split, in order to allow for better review. The patches are mostly small changes but essential for the correct use of the driver. The first patches looked like fixes that should be marked for the stable. Patches [11,17/17] might be a bit bigger but 11/17 is quite straightforward and 17/17 is basically a duplication of a very similar commit coming from the BMP280 driver [1]. In general, the datasheet [2] of the driver is not very descriptive, and it redirects the user to the BME68x Sensor API [3]. All the things that were identified from the BME68x Sensor API have been marked with links to the original locations of the GitHub code. If this is too much and we don't want this type of information on the commit message, please let me know and I will fix it. [1]: https://lore.kernel.org/linux-iio/20240512230524.53990-1-vassilisamir@xxxxxxxxx/T/#mc6f814e9a4f8c2b39015909d174c7013b3648b9b [2]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme680-ds001.pdf [3]: https://github.com/boschsensortec/BME68x_SensorAPI/tree/master Vasileios Amoiridis (17): iio: chemical: bme680: Fix pressure value output iio: chemical: bme680: Fix calibration data variable iio: chemical: bme680: Fix overflows in compensate() functions iio: chemical: bme680: Fix sensor data read operation iio: chemical: bme680: Fix type in define iio: chemical: bme680: Add mutexes to guard read/write to device iio: chemical: bme680: Drop unnecessary casts and correct adc data types iio: chemical: bme680: Remove remaining ACPI-only stuff iio: chemical: bme680: Sort headers alphabetically iio: chemical: bme680: Remove duplicate register read iio: chemical: bme680: Use bulk reads for calibration data iio: chemical: bme680: Allocate IIO device before chip initialization iio: chemical: bme680: Add read buffers in DMA safe region iio: chemical: bme680: Modify startup procedure iio: chemical: bme680: Remove redundant gas configuration iio: chemical: bme680: Move forced mode setup in ->read_raw() iio: chemical: bme680: Refactorize reading functions drivers/iio/chemical/bme680.h | 39 +- drivers/iio/chemical/bme680_core.c | 643 ++++++++++++++--------------- 2 files changed, 315 insertions(+), 367 deletions(-) base-commit: 409b6d632f5078f3ae1018b6e43c32f2e12f6736 -- 2.25.1
