On Mon, 27 May 2024 20:37:48 +0200 Vasileios Amoiridis <vassilisamir@xxxxxxxxx> wrote: > This started as a series to add support for buffers and the new > BME688 but it ended up being just a cleaning series. These might > be quite some patches for such a thing but I feel that they are > are well split, in order to allow for better review. > > The patches are mostly small changes but essential for the correct use > of the driver. The first patches looked like fixes that should be > marked for the stable. Patches [11,17/17] might be a bit bigger but 11/17 > is quite straightforward and 17/17 is basically a duplication of a > very similar commit coming from the BMP280 driver [1]. > > In general, the datasheet [2] of the driver is not very descriptive, > and it redirects the user to the BME68x Sensor API [3]. All the things > that were identified from the BME68x Sensor API have been marked with > links to the original locations of the GitHub code. If this is too much > and we don't want this type of information on the commit message, please > let me know and I will fix it. > > [1]: https://lore.kernel.org/linux-iio/20240512230524.53990-1-vassilisamir@xxxxxxxxx/T/#mc6f814e9a4f8c2b39015909d174c7013b3648b9b > [2]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme680-ds001.pdf > [3]: https://github.com/boschsensortec/BME68x_SensorAPI/tree/master +CC Mike and David who have been active around this driver in the past. > > Vasileios Amoiridis (17): > iio: chemical: bme680: Fix pressure value output > iio: chemical: bme680: Fix calibration data variable > iio: chemical: bme680: Fix overflows in compensate() functions > iio: chemical: bme680: Fix sensor data read operation > iio: chemical: bme680: Fix type in define > iio: chemical: bme680: Add mutexes to guard read/write to device > iio: chemical: bme680: Drop unnecessary casts and correct adc data > types > iio: chemical: bme680: Remove remaining ACPI-only stuff > iio: chemical: bme680: Sort headers alphabetically > iio: chemical: bme680: Remove duplicate register read > iio: chemical: bme680: Use bulk reads for calibration data > iio: chemical: bme680: Allocate IIO device before chip initialization > iio: chemical: bme680: Add read buffers in DMA safe region > iio: chemical: bme680: Modify startup procedure > iio: chemical: bme680: Remove redundant gas configuration > iio: chemical: bme680: Move forced mode setup in ->read_raw() > iio: chemical: bme680: Refactorize reading functions > > drivers/iio/chemical/bme680.h | 39 +- > drivers/iio/chemical/bme680_core.c | 643 ++++++++++++++--------------- > 2 files changed, 315 insertions(+), 367 deletions(-) > > > base-commit: 409b6d632f5078f3ae1018b6e43c32f2e12f6736
