[PATCH 1/2] iio: adc: stx104: Implement and utilize register structures

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures.

Signed-off-by: William Breathitt Gray <william.gray@xxxxxxxxxx>
---
 drivers/iio/adc/stx104.c | 70 +++++++++++++++++++++++++++-------------
 1 file changed, 47 insertions(+), 23 deletions(-)

diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/adc/stx104.c
index 7552351bfed9..7656b363e281 100644
--- a/drivers/iio/adc/stx104.c
+++ b/drivers/iio/adc/stx104.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
+#include <linux/types.h>
 
 #define STX104_OUT_CHAN(chan) {				\
 	.type = IIO_VOLTAGE,				\
@@ -44,14 +45,36 @@ static unsigned int num_stx104;
 module_param_hw_array(base, uint, ioport, &num_stx104, 0);
 MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
 
+/**
+ * struct stx104_reg - device register structure
+ * @ad:		ADC Data
+ * @achan:	ADC Channel
+ * @dio:	Digital I/O
+ * @dac:	DAC Channels
+ * @cir_asr:	Clear Interrupts and ADC Status
+ * @acr:	ADC Control
+ * @pccr_fsh:	Pacer Clock Control and FIFO Status MSB
+ * @acfg:	ADC Configuration
+ */
+struct stx104_reg {
+	u16 ad;
+	u8 achan;
+	u8 dio;
+	u16 dac[2];
+	u8 cir_asr;
+	u8 acr;
+	u8 pccr_fsh;
+	u8 acfg;
+};
+
 /**
  * struct stx104_iio - IIO device private data structure
  * @chan_out_states:	channels' output states
- * @base:		base port address of the IIO device
+ * @reg:		I/O address offset for the device registers
  */
 struct stx104_iio {
 	unsigned int chan_out_states[STX104_NUM_OUT_CHAN];
-	void __iomem *base;
+	struct stx104_reg __iomem *reg;
 };
 
 /**
@@ -64,7 +87,7 @@ struct stx104_iio {
 struct stx104_gpio {
 	struct gpio_chip chip;
 	spinlock_t lock;
-	void __iomem *base;
+	u8 __iomem *base;
 	unsigned int out_state;
 };
 
@@ -72,6 +95,7 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
 	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
 {
 	struct stx104_iio *const priv = iio_priv(indio_dev);
+	struct stx104_reg __iomem *const reg = priv->reg;
 	unsigned int adc_config;
 	int adbu;
 	int gain;
@@ -79,7 +103,7 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_HARDWAREGAIN:
 		/* get gain configuration */
-		adc_config = ioread8(priv->base + 11);
+		adc_config = ioread8(&reg->acfg);
 		gain = adc_config & 0x3;
 
 		*val = 1 << gain;
@@ -91,24 +115,24 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
 		}
 
 		/* select ADC channel */
-		iowrite8(chan->channel | (chan->channel << 4), priv->base + 2);
+		iowrite8(chan->channel | (chan->channel << 4), &reg->achan);
 
 		/* trigger ADC sample capture and wait for completion */
-		iowrite8(0, priv->base);
-		while (ioread8(priv->base + 8) & BIT(7));
+		iowrite8(0, &reg->ad);
+		while (ioread8(&reg->cir_asr) & BIT(7));
 
-		*val = ioread16(priv->base);
+		*val = ioread16(&reg->ad);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_OFFSET:
 		/* get ADC bipolar/unipolar configuration */
-		adc_config = ioread8(priv->base + 11);
+		adc_config = ioread8(&reg->acfg);
 		adbu = !(adc_config & BIT(2));
 
 		*val = -32768 * adbu;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		/* get ADC bipolar/unipolar and gain configuration */
-		adc_config = ioread8(priv->base + 11);
+		adc_config = ioread8(&reg->acfg);
 		adbu = !(adc_config & BIT(2));
 		gain = adc_config & 0x3;
 
@@ -130,16 +154,16 @@ static int stx104_write_raw(struct iio_dev *indio_dev,
 		/* Only four gain states (x1, x2, x4, x8) */
 		switch (val) {
 		case 1:
-			iowrite8(0, priv->base + 11);
+			iowrite8(0, &priv->reg->acfg);
 			break;
 		case 2:
-			iowrite8(1, priv->base + 11);
+			iowrite8(1, &priv->reg->acfg);
 			break;
 		case 4:
-			iowrite8(2, priv->base + 11);
+			iowrite8(2, &priv->reg->acfg);
 			break;
 		case 8:
-			iowrite8(3, priv->base + 11);
+			iowrite8(3, &priv->reg->acfg);
 			break;
 		default:
 			return -EINVAL;
@@ -153,7 +177,7 @@ static int stx104_write_raw(struct iio_dev *indio_dev,
 				return -EINVAL;
 
 			priv->chan_out_states[chan->channel] = val;
-			iowrite16(val, priv->base + 4 + 2 * chan->channel);
+			iowrite16(val, priv->reg->dac + chan->channel);
 
 			return 0;
 		}
@@ -307,15 +331,15 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	}
 
 	priv = iio_priv(indio_dev);
-	priv->base = devm_ioport_map(dev, base[id], STX104_EXTENT);
-	if (!priv->base)
+	priv->reg = devm_ioport_map(dev, base[id], STX104_EXTENT);
+	if (!priv->reg)
 		return -ENOMEM;
 
 	indio_dev->info = &stx104_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
 	/* determine if differential inputs */
-	if (ioread8(priv->base + 8) & BIT(5)) {
+	if (ioread8(&priv->reg->cir_asr) & BIT(5)) {
 		indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff);
 		indio_dev->channels = stx104_channels_diff;
 	} else {
@@ -326,14 +350,14 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	indio_dev->name = dev_name(dev);
 
 	/* configure device for software trigger operation */
-	iowrite8(0, priv->base + 9);
+	iowrite8(0, &priv->reg->acr);
 
 	/* initialize gain setting to x1 */
-	iowrite8(0, priv->base + 11);
+	iowrite8(0, &priv->reg->acfg);
 
 	/* initialize DAC output to 0V */
-	iowrite16(0, priv->base + 4);
-	iowrite16(0, priv->base + 6);
+	iowrite16(0, &priv->reg->dac[0]);
+	iowrite16(0, &priv->reg->dac[1]);
 
 	stx104gpio->chip.label = dev_name(dev);
 	stx104gpio->chip.parent = dev;
@@ -348,7 +372,7 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	stx104gpio->chip.get_multiple = stx104_gpio_get_multiple;
 	stx104gpio->chip.set = stx104_gpio_set;
 	stx104gpio->chip.set_multiple = stx104_gpio_set_multiple;
-	stx104gpio->base = priv->base + 3;
+	stx104gpio->base = &priv->reg->dio;
 	stx104gpio->out_state = 0x0;
 
 	spin_lock_init(&stx104gpio->lock);
-- 
2.36.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux