Re: [PATCH v3 9/9] iio: accel: bma400: Add support for activity and inactivity events

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Jonathan,

On Sun, Apr 24, 2022 at 9:02 PM Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>
> On Tue, 19 Apr 2022 03:39:43 +0530
> Jagath Jog J <jagathjog1996@xxxxxxxxx> wrote:
>
> > Hello Jonathan,
> >
> > Thanks for your suggestions, I will fix the locking and unlocking for all
> > patches in the next series.
> >
> > Please can you guide me for auto build test error reported by kernel test
> > robot for set_mask_bits(&data->generic_event_en, msk, field_value);
> > in this patch.
> >
> > On Sat, Apr 16, 2022 at 05:55:37PM +0100, Jonathan Cameron wrote:
> > > On Tue, 12 Apr 2022 02:01:33 +0530
> > > Jagath Jog J <jagathjog1996@xxxxxxxxx> wrote:
> > >
> > > > Add support for activity and inactivity events for all axis based on the
> > > > threshold, duration and hysteresis value set from the userspace. INT1 pin
> > > > is used to interrupt and event is pushed to userspace.
> > > >
> > > > Signed-off-by: Jagath Jog J <jagathjog1996@xxxxxxxxx>
> > > > ---
> > > >  drivers/iio/accel/bma400.h      |  11 ++
> > > >  drivers/iio/accel/bma400_core.c | 229 ++++++++++++++++++++++++++++++++
> > > >  2 files changed, 240 insertions(+)
> > > >
> > > > diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h
> > > > index bc4641279be3..cbf8035c817e 100644
> > > > --- a/drivers/iio/accel/bma400.h
> > > > +++ b/drivers/iio/accel/bma400.h
> > > > @@ -93,6 +93,17 @@
> > > >  #define BMA400_ACC_ODR_MIN_WHOLE_HZ 25
> > > >  #define BMA400_ACC_ODR_MIN_HZ       12
> > > >
> > > > +/* Generic interrupts register */
> > > > +#define BMA400_GEN1INT_CONFIG0      0x3f
> > > > +#define BMA400_GEN2INT_CONFIG0      0x4A
> > > > +#define BMA400_GEN_CONFIG1_OFF      0x01
> > > > +#define BMA400_GEN_CONFIG2_OFF      0x02
> > > > +#define BMA400_GEN_CONFIG3_OFF      0x03
> > > > +#define BMA400_GEN_CONFIG31_OFF     0x04
> > > > +#define BMA400_INT_GEN1_MSK         BIT(2)
> > > > +#define BMA400_INT_GEN2_MSK         BIT(3)
> > > > +#define BMA400_GEN_HYST_MSK         GENMASK(1, 0)
> > > > +
> > > >  /*
> > > >   * BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before
> > > >   * converting to micro values for +-2g range.
> > > > diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c
> > > > index b6c79cfabaa4..226a5f63d1a6 100644
> > > > --- a/drivers/iio/accel/bma400_core.c
> > > > +++ b/drivers/iio/accel/bma400_core.c
> > > > @@ -79,6 +79,7 @@ struct bma400_data {
> > > >   int steps_enabled;
> > > >   bool step_event_en;
> > > >   bool activity_event_en;
> > > > + u8 generic_event_en;
> > > >   /* Correct time stamp alignment */
> > > >   struct {
> > > >           __le16 buff[3];
> > > > @@ -188,6 +189,25 @@ static const struct iio_event_spec bma400_activity_event = {
> > > >   .mask_shared_by_type = BIT(IIO_EV_INFO_ENABLE),
> > > >  };
> > > >
> > > > +static const struct iio_event_spec bma400_accel_event[] = {
> > > > + {
> > > > +         .type = IIO_EV_TYPE_MAG,
> > > > +         .dir = IIO_EV_DIR_FALLING,
> > > > +         .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
> > > > +                                BIT(IIO_EV_INFO_PERIOD) |
> > > > +                                BIT(IIO_EV_INFO_HYSTERESIS) |
> > > > +                                BIT(IIO_EV_INFO_ENABLE),
> > > > + },
> > > > + {
> > > > +         .type = IIO_EV_TYPE_MAG,
> > > > +         .dir = IIO_EV_DIR_RISING,
> > > > +         .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
> > > > +                                BIT(IIO_EV_INFO_PERIOD) |
> > > > +                                BIT(IIO_EV_INFO_HYSTERESIS) |
> > > > +                                BIT(IIO_EV_INFO_ENABLE),
> > > > + },
> > > > +};
> > > > +
> > > >  #define BMA400_ACC_CHANNEL(_index, _axis) { \
> > > >   .type = IIO_ACCEL, \
> > > >   .modified = 1, \
> > > > @@ -207,6 +227,8 @@ static const struct iio_event_spec bma400_activity_event = {
> > > >           .storagebits = 16,      \
> > > >           .endianness = IIO_LE,   \
> > > >   },                              \
> > > > + .event_spec = bma400_accel_event,                       \
> > > > + .num_event_specs = ARRAY_SIZE(bma400_accel_event)       \
> > > >  }
> > > >
> > > >  #define BMA400_ACTIVITY_CHANNEL(_chan2) {        \
> > > > @@ -954,6 +976,17 @@ static int bma400_read_event_config(struct iio_dev *indio_dev,
> > > >   struct bma400_data *data = iio_priv(indio_dev);
> > > >
> > > >   switch (chan->type) {
> > > > + case IIO_ACCEL:
> > > > +         switch (dir) {
> > > > +         case IIO_EV_DIR_RISING:
> > > > +                 return FIELD_GET(BMA400_INT_GEN1_MSK,
> > > > +                                  data->generic_event_en);
> > > > +         case IIO_EV_DIR_FALLING:
> > > > +                 return FIELD_GET(BMA400_INT_GEN2_MSK,
> > > > +                                  data->generic_event_en);
> > > > +         default:
> > > > +                 return -EINVAL;
> > > > +         }
> > > >   case IIO_STEPS:
> > > >           return data->step_event_en;
> > > >   case IIO_ACTIVITY:
> > > > @@ -970,8 +1003,74 @@ static int bma400_write_event_config(struct iio_dev *indio_dev,
> > > >  {
> > > >   int ret;
> > > >   struct bma400_data *data = iio_priv(indio_dev);
> > > > + int reg, msk, value, field_value;
> > > >
> > > >   switch (chan->type) {
> > > > + case IIO_ACCEL:
> > > > +         switch (dir) {
> > > > +         case IIO_EV_DIR_RISING:
> > > > +                 reg = BMA400_GEN1INT_CONFIG0;
> > > > +                 msk = BMA400_INT_GEN1_MSK;
> > > > +                 value = 2;
> > > > +                 field_value = FIELD_PREP(BMA400_INT_GEN1_MSK, state);
> > >
> > > Hopefully you can use msk in here and the compiler can tell it's constant...
> >
> > field_value = FIELD_PREP(msk, state);
> > is this the fix for error reported by kernel test robot?
> No.  That issue seems to be triggered by the size of parameters passed
> to the underlying cmpxchg behind set_mask_bits.
> Specifically riscv cmpxchg only support 32 or 64 bit inputs.
> https://elixir.bootlin.com/linux/latest/source/arch/riscv/include/asm/cmpxchg.h#L302
>
> Easiest fix is probably just to make generic_event_en 32 bits.

In the patch series v4 I have declared generic_event_en as unsigned int.

> ..
>
> > > > +static int bma400_read_event_value(struct iio_dev *indio_dev,
> > > > +                            const struct iio_chan_spec *chan,
> > > > +                            enum iio_event_type type,
> > > > +                            enum iio_event_direction dir,
> > > > +                            enum iio_event_info info,
> > > > +                            int *val, int *val2)
> > > > +{
> > > > + struct bma400_data *data = iio_priv(indio_dev);
> > > > + int ret;
> > > > + u8 reg, duration[2];
> > > > +
> > > > + reg = get_gen_config_reg(dir);
> > > > + if (reg < 0)
> > > > +         return -EINVAL;
> > > > +
> > > > + *val2 = 0;
> > > > + switch (info) {
> > > > + case IIO_EV_INFO_VALUE:
> > > > +         mutex_lock(&data->mutex);
> > > > +         ret = regmap_read(data->regmap, reg + BMA400_GEN_CONFIG2_OFF,
> > > > +                           val);
> > > > +         mutex_unlock(&data->mutex);
> > > > +         if (ret)
> > > > +                 return ret;
> > > > +         return IIO_VAL_INT;
> > > > + case IIO_EV_INFO_PERIOD:
> > > > +         mutex_lock(&data->mutex);
> > > > +         ret = regmap_bulk_read(data->regmap,
> > > > +                                reg + BMA400_GEN_CONFIG3_OFF,
> > > > +                                duration, sizeof(duration));
> > > > +         mutex_unlock(&data->mutex);
> > > > +         if (ret)
> > > > +                 return ret;
> > > > +         *val = get_unaligned_be16(duration);
> > >
> > > As well as dma safety question, you could just have used a __be16 for
> > > duration then you can use be16_to_cpu() as you know it is aligned.
> >
> > For dma safety, do I need to allocate memory by using local kmalloc() or
> > I can use __be16 local variable for regmap_bulk_read()?
>
> Ah. i've been unclear there.   Was pointing out that if we didn't need
> to force alignment larger for DMA safety then using __be16 would have
> ensured that this was correctly aligned.  However we do need to
> force it so either use a kmalloc'd buffer as you suggest or
> play games with an aligned buffer in the iio_priv() region.

In v4 series, I have used a __be16 buffer in the iio_priv() region for
duration so
that it can be used for both regmap_bulk_read() and regmap_bulk_write().

>
> Note however that we have a bug in IIO currently as we have
> been forcing alignment to L1 cache size which is wrong (not enough in some cases
> and far too much in others).  I'll be posting
> some patches to fix that in the next few days.
>
>
> >
> > >
> > > > +         return IIO_VAL_INT;
> > > > + case IIO_EV_INFO_HYSTERESIS:
> > > > +         mutex_lock(&data->mutex);
> > > > +         ret = regmap_read(data->regmap, reg, val);
> > > > +         mutex_unlock(&data->mutex);
> > > > +         if (ret)
> > > > +                 return ret;
> > > > +         *val = FIELD_GET(BMA400_GEN_HYST_MSK, *val);
> > > > +         return IIO_VAL_INT;
> > > > + default:
> > > > +         return -EINVAL;
> > > > + }
> > > > +}
> > > > +
> > > > +static int bma400_write_event_value(struct iio_dev *indio_dev,
> > > > +                             const struct iio_chan_spec *chan,
> > > > +                             enum iio_event_type type,
> > > > +                             enum iio_event_direction dir,
> > > > +                             enum iio_event_info info,
> > > > +                             int val, int val2)
> > > > +{
> > > > + struct bma400_data *data = iio_priv(indio_dev);
> > > > + int ret;
> > > > + u8 reg, duration[2];
> > > > +
> > > > + reg = get_gen_config_reg(dir);
> > > > + if (reg < 0)
> > > > +         return -EINVAL;
> > > > +
> > > > + switch (info) {
> > > > + case IIO_EV_INFO_VALUE:
> > > > +         if (val < 1 || val > 255)
> > > > +                 return -EINVAL;
> > > > +
> > > > +         mutex_lock(&data->mutex);
> > > > +         ret = regmap_write(data->regmap, reg + BMA400_GEN_CONFIG2_OFF,
> > > > +                            val);
> > > > +         mutex_unlock(&data->mutex);
> > > > +         return ret;
> > > > + case IIO_EV_INFO_PERIOD:
> > > > +         if (val < 1 || val > 65535)
> > > > +                 return -EINVAL;
> > > > +
> > > > +         put_unaligned_be16(val, duration);
> > > > +
> > > > +         mutex_lock(&data->mutex);
> > > > +         ret = regmap_bulk_write(data->regmap,
> > > > +                                 reg + BMA400_GEN_CONFIG3_OFF,
> > > > +                                 duration, sizeof(duration));
> > >
> > > I can't remember if we are safe or not with bulk_writes but at least
> > > in theory we might not be and should be using a dma safe buffer.
> >
> > Here also for regmap_bulk_write() can I allocate the memory locally by using
> > kmalloc().
>
> Yes though that's usually a pain to handle in comparison with a buffer in iio_priv()
> as you have to free it again.
>
> >
> > >
> > > Also locking not necessary in various places in here.
> >
> > I will fix the locking in all the patches in the next series.
> >
> > >
> > > > +         mutex_unlock(&data->mutex);
> > > > +         return ret;
> > > > + case IIO_EV_INFO_HYSTERESIS:
> > > > +         if (val < 0 || val > 3)
> > > > +                 return -EINVAL;
> > > > +
> > > > +         mutex_lock(&data->mutex);
> > > > +         ret = regmap_update_bits(data->regmap, reg,
> > > > +                                  BMA400_GEN_HYST_MSK,
> > > > +                                  FIELD_PREP(BMA400_GEN_HYST_MSK, val));
> > > > +         mutex_unlock(&data->mutex);
> > > > +         return ret;
> > > > + default:
> > > > +         return -EINVAL;
> > > > + }
> > > > +}
> > > > +
> > >
> >
> > Thank you,
> > Jagath
>
> Thanks,
>
> Jonathan
>
>



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux