On Tue, 19 Apr 2022 03:39:43 +0530
Jagath Jog J <jagathjog1996@xxxxxxxxx> wrote:
> Hello Jonathan,
>
> Thanks for your suggestions, I will fix the locking and unlocking for all
> patches in the next series.
>
> Please can you guide me for auto build test error reported by kernel test
> robot for set_mask_bits(&data->generic_event_en, msk, field_value);
> in this patch.
>
> On Sat, Apr 16, 2022 at 05:55:37PM +0100, Jonathan Cameron wrote:
> > On Tue, 12 Apr 2022 02:01:33 +0530
> > Jagath Jog J <jagathjog1996@xxxxxxxxx> wrote:
> >
> > > Add support for activity and inactivity events for all axis based on the
> > > threshold, duration and hysteresis value set from the userspace. INT1 pin
> > > is used to interrupt and event is pushed to userspace.
> > >
> > > Signed-off-by: Jagath Jog J <jagathjog1996@xxxxxxxxx>
> > > ---
> > > drivers/iio/accel/bma400.h | 11 ++
> > > drivers/iio/accel/bma400_core.c | 229 ++++++++++++++++++++++++++++++++
> > > 2 files changed, 240 insertions(+)
> > >
> > > diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h
> > > index bc4641279be3..cbf8035c817e 100644
> > > --- a/drivers/iio/accel/bma400.h
> > > +++ b/drivers/iio/accel/bma400.h
> > > @@ -93,6 +93,17 @@
> > > #define BMA400_ACC_ODR_MIN_WHOLE_HZ 25
> > > #define BMA400_ACC_ODR_MIN_HZ 12
> > >
> > > +/* Generic interrupts register */
> > > +#define BMA400_GEN1INT_CONFIG0 0x3f
> > > +#define BMA400_GEN2INT_CONFIG0 0x4A
> > > +#define BMA400_GEN_CONFIG1_OFF 0x01
> > > +#define BMA400_GEN_CONFIG2_OFF 0x02
> > > +#define BMA400_GEN_CONFIG3_OFF 0x03
> > > +#define BMA400_GEN_CONFIG31_OFF 0x04
> > > +#define BMA400_INT_GEN1_MSK BIT(2)
> > > +#define BMA400_INT_GEN2_MSK BIT(3)
> > > +#define BMA400_GEN_HYST_MSK GENMASK(1, 0)
> > > +
> > > /*
> > > * BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before
> > > * converting to micro values for +-2g range.
> > > diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c
> > > index b6c79cfabaa4..226a5f63d1a6 100644
> > > --- a/drivers/iio/accel/bma400_core.c
> > > +++ b/drivers/iio/accel/bma400_core.c
> > > @@ -79,6 +79,7 @@ struct bma400_data {
> > > int steps_enabled;
> > > bool step_event_en;
> > > bool activity_event_en;
> > > + u8 generic_event_en;
> > > /* Correct time stamp alignment */
> > > struct {
> > > __le16 buff[3];
> > > @@ -188,6 +189,25 @@ static const struct iio_event_spec bma400_activity_event = {
> > > .mask_shared_by_type = BIT(IIO_EV_INFO_ENABLE),
> > > };
> > >
> > > +static const struct iio_event_spec bma400_accel_event[] = {
> > > + {
> > > + .type = IIO_EV_TYPE_MAG,
> > > + .dir = IIO_EV_DIR_FALLING,
> > > + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
> > > + BIT(IIO_EV_INFO_PERIOD) |
> > > + BIT(IIO_EV_INFO_HYSTERESIS) |
> > > + BIT(IIO_EV_INFO_ENABLE),
> > > + },
> > > + {
> > > + .type = IIO_EV_TYPE_MAG,
> > > + .dir = IIO_EV_DIR_RISING,
> > > + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
> > > + BIT(IIO_EV_INFO_PERIOD) |
> > > + BIT(IIO_EV_INFO_HYSTERESIS) |
> > > + BIT(IIO_EV_INFO_ENABLE),
> > > + },
> > > +};
> > > +
> > > #define BMA400_ACC_CHANNEL(_index, _axis) { \
> > > .type = IIO_ACCEL, \
> > > .modified = 1, \
> > > @@ -207,6 +227,8 @@ static const struct iio_event_spec bma400_activity_event = {
> > > .storagebits = 16, \
> > > .endianness = IIO_LE, \
> > > }, \
> > > + .event_spec = bma400_accel_event, \
> > > + .num_event_specs = ARRAY_SIZE(bma400_accel_event) \
> > > }
> > >
> > > #define BMA400_ACTIVITY_CHANNEL(_chan2) { \
> > > @@ -954,6 +976,17 @@ static int bma400_read_event_config(struct iio_dev *indio_dev,
> > > struct bma400_data *data = iio_priv(indio_dev);
> > >
> > > switch (chan->type) {
> > > + case IIO_ACCEL:
> > > + switch (dir) {
> > > + case IIO_EV_DIR_RISING:
> > > + return FIELD_GET(BMA400_INT_GEN1_MSK,
> > > + data->generic_event_en);
> > > + case IIO_EV_DIR_FALLING:
> > > + return FIELD_GET(BMA400_INT_GEN2_MSK,
> > > + data->generic_event_en);
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > case IIO_STEPS:
> > > return data->step_event_en;
> > > case IIO_ACTIVITY:
> > > @@ -970,8 +1003,74 @@ static int bma400_write_event_config(struct iio_dev *indio_dev,
> > > {
> > > int ret;
> > > struct bma400_data *data = iio_priv(indio_dev);
> > > + int reg, msk, value, field_value;
> > >
> > > switch (chan->type) {
> > > + case IIO_ACCEL:
> > > + switch (dir) {
> > > + case IIO_EV_DIR_RISING:
> > > + reg = BMA400_GEN1INT_CONFIG0;
> > > + msk = BMA400_INT_GEN1_MSK;
> > > + value = 2;
> > > + field_value = FIELD_PREP(BMA400_INT_GEN1_MSK, state);
> >
> > Hopefully you can use msk in here and the compiler can tell it's constant...
>
> field_value = FIELD_PREP(msk, state);
> is this the fix for error reported by kernel test robot?
No. That issue seems to be triggered by the size of parameters passed
to the underlying cmpxchg behind set_mask_bits.
Specifically riscv cmpxchg only support 32 or 64 bit inputs.
https://elixir.bootlin.com/linux/latest/source/arch/riscv/include/asm/cmpxchg.h#L302
Easiest fix is probably just to make generic_event_en 32 bits.
..
> > > +static int bma400_read_event_value(struct iio_dev *indio_dev,
> > > + const struct iio_chan_spec *chan,
> > > + enum iio_event_type type,
> > > + enum iio_event_direction dir,
> > > + enum iio_event_info info,
> > > + int *val, int *val2)
> > > +{
> > > + struct bma400_data *data = iio_priv(indio_dev);
> > > + int ret;
> > > + u8 reg, duration[2];
> > > +
> > > + reg = get_gen_config_reg(dir);
> > > + if (reg < 0)
> > > + return -EINVAL;
> > > +
> > > + *val2 = 0;
> > > + switch (info) {
> > > + case IIO_EV_INFO_VALUE:
> > > + mutex_lock(&data->mutex);
> > > + ret = regmap_read(data->regmap, reg + BMA400_GEN_CONFIG2_OFF,
> > > + val);
> > > + mutex_unlock(&data->mutex);
> > > + if (ret)
> > > + return ret;
> > > + return IIO_VAL_INT;
> > > + case IIO_EV_INFO_PERIOD:
> > > + mutex_lock(&data->mutex);
> > > + ret = regmap_bulk_read(data->regmap,
> > > + reg + BMA400_GEN_CONFIG3_OFF,
> > > + duration, sizeof(duration));
> > > + mutex_unlock(&data->mutex);
> > > + if (ret)
> > > + return ret;
> > > + *val = get_unaligned_be16(duration);
> >
> > As well as dma safety question, you could just have used a __be16 for
> > duration then you can use be16_to_cpu() as you know it is aligned.
>
> For dma safety, do I need to allocate memory by using local kmalloc() or
> I can use __be16 local variable for regmap_bulk_read()?
Ah. i've been unclear there. Was pointing out that if we didn't need
to force alignment larger for DMA safety then using __be16 would have
ensured that this was correctly aligned. However we do need to
force it so either use a kmalloc'd buffer as you suggest or
play games with an aligned buffer in the iio_priv() region.
Note however that we have a bug in IIO currently as we have
been forcing alignment to L1 cache size which is wrong (not enough in some cases
and far too much in others). I'll be posting
some patches to fix that in the next few days.
>
> >
> > > + return IIO_VAL_INT;
> > > + case IIO_EV_INFO_HYSTERESIS:
> > > + mutex_lock(&data->mutex);
> > > + ret = regmap_read(data->regmap, reg, val);
> > > + mutex_unlock(&data->mutex);
> > > + if (ret)
> > > + return ret;
> > > + *val = FIELD_GET(BMA400_GEN_HYST_MSK, *val);
> > > + return IIO_VAL_INT;
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +}
> > > +
> > > +static int bma400_write_event_value(struct iio_dev *indio_dev,
> > > + const struct iio_chan_spec *chan,
> > > + enum iio_event_type type,
> > > + enum iio_event_direction dir,
> > > + enum iio_event_info info,
> > > + int val, int val2)
> > > +{
> > > + struct bma400_data *data = iio_priv(indio_dev);
> > > + int ret;
> > > + u8 reg, duration[2];
> > > +
> > > + reg = get_gen_config_reg(dir);
> > > + if (reg < 0)
> > > + return -EINVAL;
> > > +
> > > + switch (info) {
> > > + case IIO_EV_INFO_VALUE:
> > > + if (val < 1 || val > 255)
> > > + return -EINVAL;
> > > +
> > > + mutex_lock(&data->mutex);
> > > + ret = regmap_write(data->regmap, reg + BMA400_GEN_CONFIG2_OFF,
> > > + val);
> > > + mutex_unlock(&data->mutex);
> > > + return ret;
> > > + case IIO_EV_INFO_PERIOD:
> > > + if (val < 1 || val > 65535)
> > > + return -EINVAL;
> > > +
> > > + put_unaligned_be16(val, duration);
> > > +
> > > + mutex_lock(&data->mutex);
> > > + ret = regmap_bulk_write(data->regmap,
> > > + reg + BMA400_GEN_CONFIG3_OFF,
> > > + duration, sizeof(duration));
> >
> > I can't remember if we are safe or not with bulk_writes but at least
> > in theory we might not be and should be using a dma safe buffer.
>
> Here also for regmap_bulk_write() can I allocate the memory locally by using
> kmalloc().
Yes though that's usually a pain to handle in comparison with a buffer in iio_priv()
as you have to free it again.
>
> >
> > Also locking not necessary in various places in here.
>
> I will fix the locking in all the patches in the next series.
>
> >
> > > + mutex_unlock(&data->mutex);
> > > + return ret;
> > > + case IIO_EV_INFO_HYSTERESIS:
> > > + if (val < 0 || val > 3)
> > > + return -EINVAL;
> > > +
> > > + mutex_lock(&data->mutex);
> > > + ret = regmap_update_bits(data->regmap, reg,
> > > + BMA400_GEN_HYST_MSK,
> > > + FIELD_PREP(BMA400_GEN_HYST_MSK, val));
> > > + mutex_unlock(&data->mutex);
> > > + return ret;
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +}
> > > +
> >
>
> Thank you,
> Jagath
Thanks,
Jonathan
