On Fri, 12 Mar 2021 17:56:50 +0100 Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx> wrote: > On 3/7/21 1:04 PM, Jonathan Cameron wrote: > > On Sun, 7 Mar 2021 10:40:18 +0100 > > Lars-Peter Clausen <lars@xxxxxxxxxx> wrote: > > > >> On 1/17/21 4:38 PM, Jonathan Cameron wrote: > >>> From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > >>> > >>> The timer-stm32 provided a little more specific information than the main > >>> docs about the value of 0 corresponding to stopping sampling. Given that > >>> this makes sense in general, move that statement over to the main docs > >>> and drop the version in sysfs-bus-iio-timer-stm32 > >>> > >>> Fixes > >>> $ scripts/get_abi.pl validate > >>> /sys/bus/iio/devices/triggerX/sampling_frequency is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-timer-stm32:92 ./Documentation/ABI/testing/sysfs-bus-iio:45 > >>> > >>> Cc: Fabrice Gasnier <fabrice.gasnier@xxxxxx> > >>> Reported-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> > >>> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > >>> --- > >>> Documentation/ABI/testing/sysfs-bus-iio | 2 ++ > >>> Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 | 8 -------- > >>> 2 files changed, 2 insertions(+), 8 deletions(-) > >>> > >>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio > >>> index d2dd9cc280f9..9b5ceb22363d 100644 > >>> --- a/Documentation/ABI/testing/sysfs-bus-iio > >>> +++ b/Documentation/ABI/testing/sysfs-bus-iio > >>> @@ -55,6 +55,8 @@ Description: > >>> direct access interfaces, it may be found in any of the > >>> relevant directories. If it affects all of the above > >>> then it is to be found in the base device directory. > >>> + Note a value 0 where supported, will correspond to sampling > >>> + stopping. > >> > >> Hm, I don't like this. 0 should be an invalid value for the standard > >> ABI. Enabling/disabling of the trigger should be controlled by whether > >> there are any active trigger consumers. > >> > >> The stm32-timer-trigger implements a non-standard ABI and I think we > >> need to document this explicitly. The driver does not have a set_state > >> callback. So the frequency property is used to enable/disable the > >> trigger, but as said above, for standard compliant triggers that should > >> not be the case. > >> > > Good point. Ideally we'd also fix the stm32-timer-trigger to have > > an explicit enable / disable (even if that works by setting the frequency > > to 0 under the hook) > > Hi Jonathan, > > I'd like to come up with something here... > The trivial use case is: the stm32-timer triggers the stm32-adc (by HW). > In this case, "set_trigger_state" perfectly fits the needs (looks like). > > But such change doesn't seems trivial when considering one timer can > trig another timer in hardware here. The "set_trigger_state" isn't > called in such a case. Ah. I'd forgotten that complexity. > So, I'm not sure what could be suitable to implement explicit > enable/disable of the timer trigger ? Perhaps we should just document this one as non standard. We already have a few ABI docs that reflect devices that do something that is kind of 'in the spirit' of the ABI, but stretches in a little in an unusual direction. For those we just say what parts they apply to. It is existing ABI anyway so there is no disadvantage in keeping it around if we can't come up with something better. > > Just to share some thoughts here: For sure the stm32-timer-trigger would > need additional changes (I haven't forget other mail thread on the > preset attribute). I believe also some functionalities should be moved > to the counter framework. But, even provided this, I think there will > still be a need for an enable or disable attribute, for the trigger part. > > Perhaps adding an enable/disable attribute could be a way here ? Hmm. At least based on limited caffeine in my system this morning I think that we may be better off with it just being as it is now and a slightly 'stretch' of the ABI. What do others think? Jonathan > If yes, would you have some suggestion on the naming ? > > Please advice, > Thanks in advance, > Fabrice > > > > > For now I've dropped the patch until this is resolved. > > > > Thanks, > > > > Jonathan > > > >
