Re: [PATCH 1/2 v3] iio: st_sensors: support active-low interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/01/16 16:55, Jonathan Cameron wrote:
> On 05/01/16 15:18, Linus Walleij wrote:
>> On Sun, Nov 22, 2015 at 1:22 PM, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>>> On 19/11/15 09:15, Linus Walleij wrote:
>>>> Most ST MEMS Sensors that support interrupts can also handle sending
>>>> an active low interrupt, i.e. going from high to low on data ready
>>>> (or other interrupt) and thus triggering on a falling edge to the
>>>> interrupt controller.
>>>>
>>>> Set up logic to inspect the interrupt line we get for a sensor: if
>>>> it is triggering on rising edge, leave everything alone, but if it
>>>> triggers on falling edges, set up active low, and if unsupported
>>>> configurations appear: warn with errors and reconfigure the interrupt
>>>> to a rising edge, which all interrupt generating sensors support.
>>>>
>>>> Create a local header for st_sensors_core.h to share functions
>>>> between the sensor core and the trigger setup code.
>>>>
>>>> Cc: Giuseppe Barba <giuseppe.barba@xxxxxx>
>>>> Cc: Denis Ciocca <denis.ciocca@xxxxxx>
>>>> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
>>>
>>> Looks good to me.  Ideally I'd like ack from Denis.
>>> (it's early in the cycle so plenty of time for this one!)
>>
>> Has this fallen off the table?
> oops. Yes it has indeed.  I still had it marked as outstanding
> but it had drifted too many pages up in my patch list to get
> noticed.  Good thing you are keeping track!
>> I think this patch 1/2 is fine
>> to merge as-is, I guess it is too late for v4.5 now, but
>> please queue it for the next cycle.
> It was a little interesting to apply so could you take
> a look at my testing branch and check I didn't mess it up.
> Needed a fair bit of hand resolution though I think it was
> all just fuzz really.
Oops, failed to add the new header.  Now fixed in testing.

Jonathan
> 
> Applied to the togreg branch of iio.git - initially pushed out
> as testing.
> 
> Jonathan
>>
>> Yours,
>> Linus Walleij
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux