On April 11, 2014 11:45:42 PM GMT+01:00, "최찬우" <cwchoi00@xxxxxxxxx> wrote: >Hi Bartlomiej, > >On Fri, Apr 11, 2014 at 6:41 PM, Bartlomiej Zolnierkiewicz ><b.zolnierkie@xxxxxxxxxxx> wrote: >> >> Hi, >> >> On Friday, April 11, 2014 11:00:40 AM Chanwoo Choi wrote: >>> This patch control special clock for ADC in Exynos series's FSYS >block. >> >> s/control/controls/ > >I'll fix it. > >> >>> If special clock of ADC is registerd on clock list of common clk >framework, >>> Exynos ADC drvier have to control this clock. >> >> s/drvier/driver/ > >I'll fix it. > >> >>> Exynos3250/Exynos4/Exynos5 has 'adc' clock as following: >>> - 'adc' clock: bus clock for ADC >>> >>> Exynos3250 has additional 'sclk_tsadc' clock as following: >>> - 'sclk_tsadc' clock: special clock for ADC which provide clock to >internal ADC >>> >>> Exynos 4210/4212/4412 and Exynos5250/5420 has not included >'sclk_tsadc' clock >>> in FSYS_BLK. But, Exynos3250 based on Cortex-A7 has only included >'sclk_tsadc' >>> clock in FSYS_BLK. >>> >>> Cc: Jonathan Cameron <jic23@xxxxxxxxxx> >>> Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx> >>> Cc: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx> >>> Cc: linux-iio@xxxxxxxxxxxxxxx >>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> >>> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> >>> --- >>> drivers/iio/adc/exynos_adc.c | 13 +++++++++++++ >>> 1 file changed, 13 insertions(+) >>> >>> diff --git a/drivers/iio/adc/exynos_adc.c >b/drivers/iio/adc/exynos_adc.c >>> index d25b262..4cd1975 100644 >>> --- a/drivers/iio/adc/exynos_adc.c >>> +++ b/drivers/iio/adc/exynos_adc.c >>> @@ -88,6 +88,7 @@ struct exynos_adc { >>> void __iomem *regs; >>> void __iomem *enable_reg; >>> struct clk *clk; >>> + struct clk *sclk; >>> unsigned int irq; >>> struct regulator *vdd; >>> >>> @@ -308,6 +309,13 @@ static int exynos_adc_probe(struct >platform_device *pdev) >>> goto err_irq; >>> } >>> >>> + info->sclk = devm_clk_get(&pdev->dev, "sclk_tsadc"); >>> + if (IS_ERR(info->sclk)) { >>> + dev_warn(&pdev->dev, "failed getting sclk clock, err = >%ld\n", >>> + >PTR_ERR(info->sclk)); >>> + info->sclk = NULL; >>> + } >>> + >>> info->vdd = devm_regulator_get(&pdev->dev, "vdd"); >>> if (IS_ERR(info->vdd)) { >>> dev_err(&pdev->dev, "failed getting regulator, err = >%ld\n", >>> @@ -341,6 +349,7 @@ static int exynos_adc_probe(struct >platform_device *pdev) >>> goto err_iio_dev; >>> >>> clk_prepare_enable(info->clk); >>> + clk_prepare_enable(info->sclk); >>> >>> exynos_adc_hw_init(info); >>> >>> @@ -357,6 +366,7 @@ err_of_populate: >>> exynos_adc_remove_devices); >>> regulator_disable(info->vdd); >>> clk_disable_unprepare(info->clk); >>> + clk_disable_unprepare(info->sclk); >> >> Please disable clocks in the reverse of order in which they were >enabled. > >Is it necessary? I don't think that. It is probably not a bug but it is more obviously correct in the reverse order so that is how it should be done! > >Best Regards, >Chanwoo Choi -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html