On Thu, Oct 16, 2008 at 2:44 AM, Tejun Heo <tj@xxxxxxxxxx> wrote: > gettinther wrote: >> On Wed, Oct 15, 2008 at 6:22 AM, Tejun Heo <tj@xxxxxxxxxx> wrote: >>> gettinther wrote: >>>> The log simply ignores the drive altogether. >>>> >>>> from the sound coming from the drive, it does seem that the drive >>>> initially starts at boot, then stops. After that stage the device >>>> detection takes place. as the item is a pata to sata converter >>>> (emulated sata), it does not support hot plugging. >>>> >>>> I also need to mention that this behavior (start-stop during boot) did >>>> not happen on the 2.6.24 and I need to check the 2.6.27. However the >>>> device is detected by both of these kernels. >>> Hmmm... >>> >>>> Oct 14 21:18:12 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus >>>> 113 SControl 300) >>> Hmmm... Can you please apply the attached patch on top of it and >>> report the boot log? >>> >>> -- >>> tejun >>> >> >> here it is. Let me know if you need other parts of the logs. > > Ah.. okay, you need to change .hardreset to ATA_OP_NULL instead of > sata_std_hardreset. > > -- > tejun > On both 2.6.26 and 2.6.27 or just the 2.6.26? The initial patch does work on the 2.6.27 Thanks, Cyrille -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
