gettinther wrote: > On Wed, Oct 15, 2008 at 6:22 AM, Tejun Heo <tj@xxxxxxxxxx> wrote: >> gettinther wrote: >>> The log simply ignores the drive altogether. >>> >>> from the sound coming from the drive, it does seem that the drive >>> initially starts at boot, then stops. After that stage the device >>> detection takes place. as the item is a pata to sata converter >>> (emulated sata), it does not support hot plugging. >>> >>> I also need to mention that this behavior (start-stop during boot) did >>> not happen on the 2.6.24 and I need to check the 2.6.27. However the >>> device is detected by both of these kernels. >> Hmmm... >> >>> Oct 14 21:18:12 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus >>> 113 SControl 300) >> Hmmm... Can you please apply the attached patch on top of it and >> report the boot log? >> >> -- >> tejun >> > > here it is. Let me know if you need other parts of the logs. Ah.. okay, you need to change .hardreset to ATA_OP_NULL instead of sata_std_hardreset. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html