Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_cs5535.c linux-2.6.21-rc2-mm2/drivers/ata/pata_cs5535.c
--- linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_cs5535.c 2007-03-06 23:09:46.000000000 +0000
+++ linux-2.6.21-rc2-mm2/drivers/ata/pata_cs5535.c 2007-03-06 23:35:15.000000000 +0000
@@ -39,7 +39,7 @@
#include <asm/msr.h>
#define DRV_NAME "cs5535"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.2.12"
/*
* The Geode (Aka Athlon GX now) uses an internal MSR based
@@ -70,36 +70,22 @@
#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )
/**
- * cs5535_pre_reset - detect cable type
+ * cs5535_cable_detect - detect cable type
* @ap: Port to detect on
*
* Perform cable detection for ATA66 capable cable. Return a libata
* cable type.
*/
-static int cs5535_pre_reset(struct ata_port *ap)
+static int cs5535_cable_detect(struct ata_port *ap)
{
u8 cable;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
if (cable & 1)
- ap->cbl = ATA_CBL_PATA80;
- else
- ap->cbl = ATA_CBL_PATA40;
- return ata_std_prereset(ap);
-}
-
-/**
- * cs5535_error_handler - reset/probe
- * @ap: Port to reset
- *
- * Reset and configure a port
- */
-
-static void cs5535_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ATA_CBL_PATA80;
+ return ATA_CBL_PATA40;
}
/**
@@ -205,8 +191,9 @@
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = cs5535_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = cs5535_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
