Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_artop.c linux-2.6.21-rc2-mm2/drivers/ata/pata_artop.c
--- linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_artop.c 2007-03-06 23:06:26.000000000 +0000
+++ linux-2.6.21-rc2-mm2/drivers/ata/pata_artop.c 2007-03-06 17:20:22.000000000 +0000
@@ -49,8 +49,6 @@
if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
-
- ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -85,18 +83,28 @@
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u8 tmp;
/* Odd numbered device ids are the units with enable bits (the -R cards) */
if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
+ return ata_std_prereset(ap);
+}
+/**
+ * artop6260_cable_detect - identify cable type
+ * @ap: Port
+ *
+ * Identify the cable type for the ARTOp interface in question
+ */
+
+static int artop6260_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 tmp;
pci_read_config_byte(pdev, 0x49, &tmp);
if (tmp & (1 << ap->port_no))
- ap->cbl = ATA_CBL_PATA40;
- else
- ap->cbl = ATA_CBL_PATA80;
- return ata_std_prereset(ap);
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
}
/**
@@ -225,7 +233,7 @@
/**
* artop6210_set_dmamode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
- * @adev: um
+ * @adev: Device whose timings we are configuring
*
* Set DMA mode for device, in host controller PCI config space.
*
@@ -333,6 +341,7 @@
.thaw = ata_bmdma_thaw,
.error_handler = artop6210_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -366,6 +375,7 @@
.thaw = ata_bmdma_thaw,
.error_handler = artop6260_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = artop6260_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
