Albert Lee wrote:
Dario Oliva wrote:
Attached are some kernel messeges. I ran dmesg several times and
appended the output to the attached file, so there may be some
redudancy. However some of the commands or debug lines do appear to
repeat themselves. As you requested, I changed "#undef ATA_DEBUG" to
"#define ATA_DEBUG".
As far as the device is concerned, is an unreleased product of the
company I work for. That's why I did not give a name, because we don't
have an official name yet. But like I said, it is SATA, removalbe ATAPI.
If you want/need more information let me know.
Is the ATAPI device native SATA or PATA with some bridge chip used?
From the log, some MODE SENSE did work at first: (So, seems not
DMADIR problem.)
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50) <= irq received.
ATAPI DMA ok
sda: Write Protect is off
===============================================================
Later, irq lost for the following MODE SENSE command:
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_scsi_error: ENTER <= timeout. ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x1 <= device is
still busy. The old EH doesn't reset the device.
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
====================================================================
After the timeout, the device is in BUSY state and can't handle any
new commands.
That's why the "infinite loop" seen. (Tejun's new EH can reset the
device and bring
it back to work.)
Don't know what caused the timeout. From the device status 0xd0, it seems
the device is waiting for something (maybe data transfer?). It is not
irq lost
because the irq is not yet generated when the device status is still
BUSY.
Is it possible to attach a protocol analyzer to the SATA cable
and check whether the ATAPI DMA data is actually transferred?
Could you also post the dmesg log with ATA_DEBUG for the working
Intel/nVidia
adapter? Maybe we can find some clue by comparing the problematic MODE
SENSE transation of both logs.
I've done minimal testing with my VIA VT6421 + ATAPI but unable to
reproduce
the problem.
Thanks,
Albert
Sorry it took so long to get you the information. In case you need me to
refresh the information here is the body of the original email I had
sent out.
"We have a removable, ATAPI, SATA device and we are having the following
problem with Linux (kernel version 2.6.15.6). The device recieves a MODE
SENSE command. After receiving this command, it is supposed to receive a
12-byte packet command, which it recieves. Afterwards there is supposed
to be an IRQ, and then the data is read from the device. However, in one
computer we have with a VIA chipset, the device keeps getting zeroes
without stopping. In other words, it gets the 12-bytes and the continues
to recive bytes all of which are zero. The device never gets the IRQ,
therefore it does not respond."
I also attached the kernel messages running on intel, nvidia, and via
chipsets.
Dario Oliva
ments mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
SCSI device sda: drive cache: write through
ata_scsi_dump_cdb: CDB (2:0,0,0) 1e 00 00 00 01 00 00 00 1c
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x51)
atapi_request_sense: ATAPI request sense
ata_exec_command_pio: ata2: cmd 0xA0
atapi_request_sense: EXIT
atapi_packet_task: busy wait
atapi_packet_task: send cdb
__atapi_pio_bytes: data read
Device not ready. Make sure there is a disc in the drive.
ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 1c
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x51)
atapi_request_sense: ATAPI request sense
ata_exec_command_pio: ata2: cmd 0xA0
atapi_request_sense: EXIT
atapi_packet_task: busy wait
atapi_packet_task: send cdb
__atapi_pio_bytes: data read
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
SCSI device sda: drive cache: write through
ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 00 00 00 01 00 00 00 00
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 00 00 00 01 00 00 00 00
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 1e 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
SCSI device sda: drive cache: write through
ata_scsi_dump_cdb: CDB (2:0,0,0) 1e 00 00 00 01 00 00 00 1c
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 1c
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
SCSI device sda: drive cache: write through
sda:<3>ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
sda1
ata_scsi_dump_cdb: CDB (2:0,0,0) 12 00 00 00 ff 00 00 00 00
ata_sg_setup: padding done, sg[0].length=252 pad_len=3
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 08 00 00 38
ata_sg_setup: 3 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 64 00 00 c8
ata_sg_setup: 25 sg elements mapped
ata_exec_command_pio: ata2: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata2: protocol 7 (dev_stat 0x50)
00 00 01 00 00 00 1c
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x51)
atapi_request_sense: ATAPI request sense
ata_exec_command_pio: ata1: cmd 0xA0
atapi_request_sense: EXIT
atapi_packet_task: busy wait
atapi_packet_task: send cdb
__atapi_pio_bytes: data read
Device not ready. Make sure there is a disc in the drive.
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x51)
atapi_request_sense: ATAPI request sense
ata_exec_command_pio: ata1: cmd 0xA0
atapi_request_sense: EXIT
atapi_packet_task: busy wait
atapi_packet_task: send cdb
__atapi_pio_bytes: data read
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
SCSI device sda: drive cache: write through
ata_scsi_dump_cdb: CDB (1:0,0,0) 1b 00 00 00 01 00 00 00 00
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 1b 00 00 00 01 00 00 00 00
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
SCSI device sda: drive cache: write through
ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 01 00 00 00 1c
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
SCSI device sda: drive cache: write through
sda:<3>ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
sda1
ata_scsi_dump_cdb: CDB (1:0,0,0) 12 00 00 00 ff 00 00 00 00
ata_sg_setup: padding done, sg[0].length=252 pad_len=3
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 00 00 00 40
ata_sg_setup: 3 sg elements mapped
ata_exec_command_pio: ata2: cmd 0x25
ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 08 00 00 38
ata_sg_setup: 2 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
ata_host_intr: ata2: protocol 4 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (2:0,0,0) 12 00 00 00 ff 00 00 00 00
ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00
ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 64 00 00 ff
ata_sg_setup: 30 sg elements mapped
ata_exec_command_pio: ata2: cmd 0x25
ata_host_intr: ata2: protocol 4 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 64 00 00 c8
ata_sg_setup: 23 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
0 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x51)
atapi_request_sense: ATAPI request sense
ata_exec_command_pio: ata1: cmd 0xA0
atapi_request_sense: EXIT
atapi_packet_task: busy wait
atapi_packet_task: send cdb
__atapi_pio_bytes: data read
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
SCSI device sda: drive cache: write through
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 128M @ 0xe8000000
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x51)
atapi_request_sense: ATAPI request sense
ata_exec_command_pio: ata1: cmd 0xA0
atapi_request_sense: EXIT
atapi_packet_task: busy wait
atapi_packet_task: send cdb
__atapi_pio_bytes: data read
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
SCSI device sda: drive cache: write through
ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 01 00 00 00 1c
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x51)
atapi_request_sense: ATAPI request sense
ata_exec_command_pio: ata1: cmd 0xA0
atapi_request_sense: EXIT
atapi_packet_task: busy wait
atapi_packet_task: send cdb
__atapi_pio_bytes: data read
Device not ready. Make sure there is a disc in the drive.
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 6 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x51)
atapi_request_sense: ATAPI request sense
ata_exec_command_pio: ata1: cmd 0xA0
atapi_request_sense: EXIT
atapi_packet_task: busy wait
atapi_packet_task: send cdb
__atapi_pio_bytes: data read
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_host_intr: ata1: protocol 7 (dev_stat 0x50)
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_sg_setup: 1 sg elements mapped
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
atapi_packet_task: send cdb
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x1
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
sda: asking for cache data failed
sda: assuming drive cache: write through
program hwscan is using a deprecated SCSI ioctl, please convert it to SG_IO
ata_scsi_dump_cdb: CDB (1:0,0,0) 12 01 80 00 ff 00 00 00 1c
ata_sg_setup_one: mapped buffer of 512 bytes for read
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Current [descriptor]: sense key: Aborted Command
Additional sense: Scsi parity error
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 17
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
p_cdb: CDB (1:0,0,0) 1e 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Current [descriptor]: sense key: Aborted Command
Additional sense: Scsi parity error
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 17
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
sda: Unit Not Ready, sense:
: Current [descriptor]: sense key: Aborted Command
Additional sense: Scsi parity error
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
si_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
sda: Unit Not Ready, sense:
: Current [descriptor]: sense key: Aborted Command
Additional sense: Scsi parity error
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08
sd: Current [descriptor]: sense key: Aborted Command
Additional sense: Scsi parity error
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 00 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 00 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
b/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
sda : READ CAPACITY failed.
sda : status=1, message=00, host=0, driver=08
sd: Current [descriptor]: sense key: Aborted Command
Additional sense: Scsi parity error
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 00 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 00 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
VFS: Can't find ext3 filesystem on dev fd0.
VFS: Can't find an ext2 filesystem on dev fd0.
VFS: Can't find a Minix or Minix V2 filesystem on device fd0.
Unable to load NLS charset cp437
FAT: codepage cp437 not found
Unable to load NLS charset cp437
FAT: codepage cp437 not found
Unable to identify CD-ROM format.
Unable to load NLS charset iso8859-1
NTFS-fs warning (device fd0): is_boot_sector_ntfs(): Invalid boot sector checksum.
NTFS-fs error (device fd0): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device fd0): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device fd0): ntfs_fill_super(): Not an NTFS volume.
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 ff
ata_sg_setup: padding done, sg[0].length=252 pad_len=3
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 ff
ata_sg_setup: padding done, sg[0].length=252 pad_len=3
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
VFS: Can't find ext3 filesystem on dev fd0.
VFS: Can't find an ext2 filesystem on dev fd0.
VFS: Can't find a Minix or Minix V2 filesystem on device fd0.
Unable to load NLS charset cp437
FAT: codepage cp437 not found
Unable to load NLS charset cp437
FAT: codepage cp437 not found
Unable to identify CD-ROM format.
Unable to load NLS charset iso8859-1
NTFS-fs warning (device fd0): is_boot_sector_ntfs(): Invalid boot sector checksum.
NTFS-fs error (device fd0): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device fd0): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device fd0): ntfs_fill_super(): Not an NTFS volume.
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
sda: test WP failed, assume Write Enabled
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_sg_setup: 1 sg elements mapped
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
Unable to load NLS charset cp437
FAT: codepage cp437 not found
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
sda: asking for cache data failed
sda: assuming drive cache: write through
ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 01 00 00 00 08
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
ata1 failed to respond (30 secs)
ATA: abnormal status 0xD0 on port 0xE007
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 01 00 00 00 08
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
atapi_packet_task: busy wait
ata1 is slow to respond, please be patient
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Current [descriptor]: sense key: Aborted Command
Additional sense: Scsi parity error
ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 08
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ATA: abnormal status 0xD0 on port 0xE007
ata_exec_command_pio: ata1: cmd 0xA0
