On 5/15/06, Jeff Garzik <jeff@xxxxxxxxxx> wrote:
Avuton Olrich wrote:
> On 5/15/06, Jeff Garzik <jeff@xxxxxxxxxx> wrote:
>> * sata_sil and ata_piix also need healthy re-testing of all basic
>> functionality.
>
> I'm testing it right now, but with 2.6.17-rc4-git2 I was getting:
Testing what? sata_sil? Please provide full dmesg, there's a lot of
missing information.
More followup, it did finally error out on me:
Not sure if it helps any, but this is a sata2 disk with a sata
interface. This is rc4-git2 with the libata patch from the beginning
of this thread, using sata_sil.
dmesg:
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: limiting speed to UDMA/66
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/66
ata1: EH complete
ata1.00: limiting speed to UDMA/44
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/44
ata1: EH complete
ata1.00: limiting speed to UDMA/33
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: SCSI error: return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 703661647
ata1: EH complete
ata1.00: limiting speed to UDMA/25
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/25
ata1: EH complete
NETDEV WATCHDOG: eth2: transmit timed out
ata1.00: limiting speed to UDMA/16
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/16
ata1: EH complete
ata1.00: limiting speed to PIO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for PIO4
ata1: EH complete
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
lspci -vvv:
01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller (rev 01)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size 08
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at a400 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at ac00 [size=16]
Region 5: Memory at e5006000 (32-bit, non-prefetchable)
[size=512]
[virtual] Expansion ROM at e6800000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
--
avuton
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
