Re: [PATCH 0/7] Resume BYT/CHT LPSS I2C controller before the iGPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 20, 2018 at 10:07:01AM +0200, Rafael J. Wysocki wrote:
> > I forgot to mention that I've tested this series on the following device
> > which had the mentioned errors:
> > 
> > GPD win:
> > CHT device with a Whiskey Cove PMIC, PMIC I2C bus free for kernel use
> > 
> > And on the following other 3 devices to make sure that I covered all
> > combinations of BYT/CHT and PMIC with/without its I2C bus shared with
> > the PUNIT:
> > 
> > Chuwi Hi8 Pro:
> > CHT device with an AXP288 PMIC, with its I2C bus shared between the PUNIT and the kernel
> > 
> > Asus T100TA:
> > BYT device with a Crystal Cove PMIC, PMIC I2C bus free for kernel use
> > 
> > Peaq C1010 2-in-1:
> > BYT device with an AXP288 PMIC, with its I2C bus shared between the PUNIT and the kernel
> > 
> > And all 4 work fine with this series applied.
> 
> OK
> 
> It looks reasonable to me overall, but I'll give Mika/Andy and others some
> time to leave comments if any.

Looks good to me as well. Nice work Hans! :)



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux