Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

On 2018-09-02 14:01, Janusz Krzysztofik wrote:
> Certain GPIO descriptor arrays returned by gpio_get_array() may contain
> information on direct mapping of array members to pins of a single GPIO
> chip in hardware order.  In such cases, bitmaps of values can be passed
> directly from/to the chip's .get/set_multiple() callbacks without
> wasting time on iterations.
>
> Add respective code to gpiod_get/set_array_bitmap_complex() functions.
> Pins not applicable for fast path are processed as before, skipping
> over the 'fast' ones.
>
> Cc: Jonathan Corbet <corbet@xxxxxxx>
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>

I've just noticed that this patch landed in today's linux-next. Sadly it
breaks booting of Exynos5250-based Samsung Snow Chromebook (ARM 32bit,
device-tree source arch/arm/boot/dts/exynos5250-snow.dts).

Booting hangs after detecting MMC cards. Reverting this patch fixes the
boot. I will try later to add some debugs and investigate it further what
really happens when booting hangs.

> ---
>   Documentation/driver-api/gpio/board.rst    | 15 ++++++
>   Documentation/driver-api/gpio/consumer.rst |  8 +++
>   drivers/gpio/gpiolib.c                     | 87 ++++++++++++++++++++++++++++--
>   3 files changed, 105 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/driver-api/gpio/board.rst b/Documentation/driver-api/gpio/board.rst
> index 2c112553df84..c66821e033c2 100644
> --- a/Documentation/driver-api/gpio/board.rst
> +++ b/Documentation/driver-api/gpio/board.rst
> @@ -193,3 +193,18 @@ And the table can be added to the board code as follows::
>   
>   The line will be hogged as soon as the gpiochip is created or - in case the
>   chip was created earlier - when the hog table is registered.
> +
> +Arrays of pins
> +--------------
> +In addition to requesting pins belonging to a function one by one, a device may
> +also request an array of pins assigned to the function.  The way those pins are
> +mapped to the device determines if the array qualifies for fast bitmap
> +processing.  If yes, a bitmap is passed over get/set array functions directly
> +between a caller and a respective .get/set_multiple() callback of a GPIO chip.
> +
> +In order to qualify for fast bitmap processing, the pin mapping must meet the
> +following requirements:
> +- it must belong to the same chip as other 'fast' pins of the function,
> +- its index within the function must match its hardware number within the chip.
> +
> +Open drain and open source pins are excluded from fast bitmap output processing.
> diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst
> index 0afd95a12b10..cf992e5ab976 100644
> --- a/Documentation/driver-api/gpio/consumer.rst
> +++ b/Documentation/driver-api/gpio/consumer.rst
> @@ -388,6 +388,14 @@ array_info should be set to NULL.
>   Note that for optimal performance GPIOs belonging to the same chip should be
>   contiguous within the array of descriptors.
>   
> +Still better performance may be achieved if array indexes of the descriptors
> +match hardware pin numbers of a single chip.  If an array passed to a get/set
> +array function matches the one obtained from gpiod_get_array() and array_info
> +associated with the array is also passed, the function may take a fast bitmap
> +processing path, passing the value_bitmap argument directly to the respective
> +.get/set_multiple() callback of the chip.  That allows for utilization of GPIO
> +banks as data I/O ports without much loss of performance.
> +
>   The return value of gpiod_get_array_value() and its variants is 0 on success
>   or negative on error. Note the difference to gpiod_get_value(), which returns
>   0 or 1 on success to convey the GPIO value. With the array functions, the GPIO
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index cef6ee31fe05..b9d083fb13ee 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -2789,7 +2789,36 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
>   				  struct gpio_array *array_info,
>   				  unsigned long *value_bitmap)
>   {
> -	int i = 0;
> +	int err, i = 0;
> +
> +	/*
> +	 * Validate array_info against desc_array and its size.
> +	 * It should immediately follow desc_array if both
> +	 * have been obtained from the same gpiod_get_array() call.
> +	 */
> +	if (array_info && array_info->desc == desc_array &&
> +	    array_size <= array_info->size &&
> +	    (void *)array_info == desc_array + array_info->size) {
> +		if (!can_sleep)
> +			WARN_ON(array_info->chip->can_sleep);
> +
> +		err = gpio_chip_get_multiple(array_info->chip,
> +					     array_info->get_mask,
> +					     value_bitmap);
> +		if (err)
> +			return err;
> +
> +		if (!raw && !bitmap_empty(array_info->invert_mask, array_size))
> +			bitmap_xor(value_bitmap, value_bitmap,
> +				   array_info->invert_mask, array_size);
> +
> +		if (bitmap_full(array_info->get_mask, array_size))
> +			return 0;
> +
> +		i = find_first_zero_bit(array_info->get_mask, array_size);
> +	} else {
> +		array_info = NULL;
> +	}
>   
>   	while (i < array_size) {
>   		struct gpio_chip *chip = desc_array[i]->gdev->chip;
> @@ -2820,7 +2849,12 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
>   			int hwgpio = gpio_chip_hwgpio(desc);
>   
>   			__set_bit(hwgpio, mask);
> -			i++;
> +
> +			if (array_info)
> +				find_next_zero_bit(array_info->get_mask,
> +						   array_size, i);
> +			else
> +				i++;
>   		} while ((i < array_size) &&
>   			 (desc_array[i]->gdev->chip == chip));
>   
> @@ -2831,7 +2865,7 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
>   			return ret;
>   		}
>   
> -		for (j = first; j < i; j++) {
> +		for (j = first; j < i; ) {
>   			const struct gpio_desc *desc = desc_array[j];
>   			int hwgpio = gpio_chip_hwgpio(desc);
>   			int value = test_bit(hwgpio, bits);
> @@ -2840,6 +2874,11 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
>   				value = !value;
>   			__assign_bit(j, value_bitmap, value);
>   			trace_gpio_value(desc_to_gpio(desc), 1, value);
> +
> +			if (array_info)
> +				find_next_zero_bit(array_info->get_mask, i, j);
> +			else
> +				j++;
>   		}
>   
>   		if (mask != fastpath)
> @@ -3041,6 +3080,32 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
>   {
>   	int i = 0;
>   
> +	/*
> +	 * Validate array_info against desc_array and its size.
> +	 * It should immediately follow desc_array if both
> +	 * have been obtained from the same gpiod_get_array() call.
> +	 */
> +	if (array_info && array_info->desc == desc_array &&
> +	    array_size <= array_info->size &&
> +	    (void *)array_info == desc_array + array_info->size) {
> +		if (!can_sleep)
> +			WARN_ON(array_info->chip->can_sleep);
> +
> +		if (!raw && !bitmap_empty(array_info->invert_mask, array_size))
> +			bitmap_xor(value_bitmap, value_bitmap,
> +				   array_info->invert_mask, array_size);
> +
> +		gpio_chip_set_multiple(array_info->chip, array_info->set_mask,
> +				       value_bitmap);
> +
> +		if (bitmap_full(array_info->set_mask, array_size))
> +			return 0;
> +
> +		i = find_first_zero_bit(array_info->set_mask, array_size);
> +	} else {
> +		array_info = NULL;
> +	}
> +
>   	while (i < array_size) {
>   		struct gpio_chip *chip = desc_array[i]->gdev->chip;
>   		unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)];
> @@ -3068,7 +3133,14 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
>   			int hwgpio = gpio_chip_hwgpio(desc);
>   			int value = test_bit(i, value_bitmap);
>   
> -			if (!raw && test_bit(FLAG_ACTIVE_LOW, &desc->flags))
> +			/*
> +			 * Pins applicable for fast input but not for
> +			 * fast output processing may have been already
> +			 * inverted inside the fast path, skip them.
> +			 */
> +			if (!raw && !(array_info &&
> +			    test_bit(i, array_info->invert_mask)) &&
> +			    test_bit(FLAG_ACTIVE_LOW, &desc->flags))
>   				value = !value;
>   			trace_gpio_value(desc_to_gpio(desc), 0, value);
>   			/*
> @@ -3087,7 +3159,12 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
>   					__clear_bit(hwgpio, bits);
>   				count++;
>   			}
> -			i++;
> +
> +			if (array_info)
> +				find_next_zero_bit(array_info->set_mask,
> +						   array_size, i);
> +			else
> +				i++;
>   		} while ((i < array_size) &&
>   			 (desc_array[i]->gdev->chip == chip));
>   		/* push collected bits to outputs */
>

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux