On 09/20/2018 11:48 AM, Mika Westerberg wrote:
On Thu, Sep 20, 2018 at 10:07:01AM +0200, Rafael J. Wysocki wrote:
I forgot to mention that I've tested this series on the following device
which had the mentioned errors:
GPD win:
CHT device with a Whiskey Cove PMIC, PMIC I2C bus free for kernel use
And on the following other 3 devices to make sure that I covered all
combinations of BYT/CHT and PMIC with/without its I2C bus shared with
the PUNIT:
Chuwi Hi8 Pro:
CHT device with an AXP288 PMIC, with its I2C bus shared between the PUNIT and the kernel
Asus T100TA:
BYT device with a Crystal Cove PMIC, PMIC I2C bus free for kernel use
Peaq C1010 2-in-1:
BYT device with an AXP288 PMIC, with its I2C bus shared between the PUNIT and the kernel
And all 4 work fine with this series applied.
OK
It looks reasonable to me overall, but I'll give Mika/Andy and others some
time to leave comments if any.
Looks good to me as well. Nice work Hans! :)
I tested the set on a BYT based MRD7 with shared I2C bus and on a CHT
which I don't know. Both devices suspended and resumed fine before the
set. Maybe my test setup with only VGA console doesn't stress enough?
Anyway I didn't notice any regression either.
Tested-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
