On 01/06/2014 12:40 AM, Jason Gunthorpe wrote:
On Mon, Jan 06, 2014 at 12:12:16AM +0100, Sebastian Hesselbarth wrote:
On 01/06/2014 12:07 AM, Jason Gunthorpe wrote:
On Sun, Jan 05, 2014 at 06:37:21PM +0100, Sebastian Hesselbarth wrote:
If you mean clock-gated with "powered down", the code is safe. It
enables the clock gate prior reading from the controller. Or is there
another way to power down the controller, so you cannot read from the
controller registers?
There is a clock gate and a power down on kirkwood at least, Linux has
no code for controlling the powerdown
Does that power down really disable reading from PCIe controller
registers or is it just PHY power down?
I haven't experimented with it, but every block that has a clock gate
has a power down, so I doubt it is just a phy power down.
Ok, I see. But it isn't documented in the public FS, is it? If there is
an extra powerdown register for each ip block, I guess it will also
break reading from its registers.
In any event, I think processing a disabled DT node is not great..
Yeah, but you see another way to get the PCIe controller registers
instead? Or any other common id register to read? IMHO PCIe ids are
the best we can find here and Gregory found the first IP that really
depends on the SoC revision..
I don't know of another option off hand, unless something is encoded
in the CPU ID register set.
Encoding the IP block version in the I2C DT compatible string is the
next best choice, but it obviously isn't automatic..
True. But I still wonder how many users will find the correct dtb
without knowing the SoC revision. Having it probed would be best for
users, but I see the difficulties.
We should really work harder on proper u-boot/barebox for all those
Orion SoCs to have at least the option to update it with DT support.
Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
