Re: [lm-sensors] Use the Linux I2C subsystem for a two wire interface protocol

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> ~$ insmod sht15.ko
> regulator: Unable to get requested regulator: vcc
> sht15 sht15: Command not acknowledged
Please ignore the 1st line as i have bypassed the regulator framework.
Another quick question: The datasheet recommends 3.3V but the
voltage measured on my lines are ~2.8V. That could be another spoiler.

-Alfred.
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux