[PATCH/RFC 1/1] recover from davinci i2c time out conditions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>From dbe7e824d576636bb15b82a20fd2557fddc9a8f7 Mon Sep 17 00:00:00 2001
From: Philby John <pjohn@xxxxxxxxxxxxx>
Date: Tue, 14 Jul 2009 21:46:47 +0530
Subject: [PATCH] Reset i2c bus to come out of time out conditions

Get out of i2c time out condition by resetting
the i2c bus. The kernel must be robust enough to
gracefully recover from i2c bus failure without having
to reset the machine. This is done by first NACKing the slave
and then resetting the i2c bus after a certain timeout.

Signed-off-by: Philby John <pjohn@xxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-davinci.c |   98 +++++++++++++++++++++++++++++++++++--
 1 files changed, 92 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 17f2ee7..4ed1a4c 100755
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -35,14 +35,18 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 
 #include <mach/i2c.h>
+#include <mach/mux.h>
+#include <mach/cputype.h>
 
 /* ----- global defines ----------------------------------------------- */
 
 #define DAVINCI_I2C_TIMEOUT	(1*HZ)
+#define DAVINCI_I2C_MAX_TRIES	2
 #define I2C_DAVINCI_INTR_ALL    (DAVINCI_I2C_IMR_AAS | \
 				 DAVINCI_I2C_IMR_SCD | \
 				 DAVINCI_I2C_IMR_ARDY | \
@@ -135,6 +139,50 @@ static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
 }
 
 /*
+ * Configure the i2c data pin as a GPIO input and the i2c clock pin as a
+ * high GPIO output.
+ */
+static void disable_i2c_pins(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (cpu_is_davinci_dm355()) {
+		gpio_direction_input(15);
+		gpio_direction_output(14, 0);
+		gpio_set_value(14, 1);
+		davinci_cfg_reg(DM355_I2C_SDA);
+		davinci_cfg_reg(DM355_I2C_SCL);
+	}
+	local_irq_restore(flags);
+}
+
+/* Connect the i2c pins to the i2c controller. */
+static void enable_i2c_pins(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (cpu_is_davinci_dm355()) {
+		davinci_cfg_reg(DM355_I2C_SDA);
+		davinci_cfg_reg(DM355_I2C_SCL);
+	}
+	local_irq_restore(flags);
+}
+
+
+/* Generate a pulse on the i2c clock pin. */
+static void pulse_i2c_clock(void)
+{
+	if (cpu_is_davinci_dm355()) {
+		gpio_set_value(14, 0);
+		udelay(20);
+		gpio_set_value(14, 1);
+		udelay(20);
+	}
+}
+
+/*
  * This functions configures I2C and brings I2C out of reset.
  * This function is called during I2C init function. This function
  * also gets called if I2C encounters any errors.
@@ -221,14 +269,36 @@ static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev,
 					 char allow_sleep)
 {
 	unsigned long timeout;
+	u16 i;
+	static u16 to_cnt = 0;
+	u32 flag = 0;
 
 	timeout = jiffies + dev->adapter.timeout;
 	while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG)
-	       & DAVINCI_I2C_STR_BB) {
-		if (time_after(jiffies, timeout)) {
-			dev_warn(dev->dev,
-				 "timeout waiting for bus ready\n");
-			return -ETIMEDOUT;
+			& DAVINCI_I2C_STR_BB) {
+
+		if (to_cnt <= DAVINCI_I2C_MAX_TRIES) {
+			if (time_after(jiffies, timeout)) {
+				dev_warn(dev->dev,
+					"timeout waiting for bus ready\n");
+				to_cnt++;
+				return -ETIMEDOUT;
+			}
+		} else if (cpu_is_davinci_dm644x() || cpu_is_davinci_dm355()) {
+			to_cnt = 0;
+			dev_err(dev->dev, "initiating i2c bus recovery\n");
+			/* Send the NACK to the slave */
+			flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
+			flag |=  DAVINCI_I2C_MDR_NACK;
+			/* write the data into mode register */
+			davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+			/* Disable i2c */
+			disable_i2c_pins();
+			for (i = 0; i < 10; i++)
+				pulse_i2c_clock();
+			/* Re-enable i2c */
+			enable_i2c_pins();
+			i2c_davinci_init(dev);
 		}
 		if (allow_sleep)
 			schedule_timeout(1);
@@ -309,7 +379,23 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
 						      dev->adapter.timeout);
 	if (r == 0) {
-		dev_err(dev->dev, "controller timed out\n");
+		u16 i;
+		u32 flag = 0;
+		if (cpu_is_davinci_dm644x() || cpu_is_davinci_dm355()) {
+			dev_err(dev->dev, "initiating i2c bus recovery\n");
+			/* Send the NACK to the slave */
+			flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
+			flag |=  DAVINCI_I2C_MDR_NACK;
+			/* write the data into mode register */
+			davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+			/* Disable i2c */
+			disable_i2c_pins();
+			/* Send high and low on the SCL line */
+			for (i = 0; i < 10; i++)
+				pulse_i2c_clock();
+			/* Re-enable i2c */
+			enable_i2c_pins();
+		}
 		i2c_davinci_init(dev);
 		dev->buf_len = 0;
 		return -ETIMEDOUT;
-- 
1.6.3.3.MVISTA

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux