Re: EFI stub boots only with setup_efi_pc() commented

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2013/9/16 Matt Fleming <matt@xxxxxxxxxxxxxxxxx>:
> On Mon, 09 Sep, at 12:45:00PM, Clea F. Rees wrote:
>> 2013/9/5 Matt Fleming <matt@xxxxxxxxxxxxxxxxx>:
>> >
>> > Sorry for the delay in replying to this.
>> >
>> > Does your machine hang during setup_efi_pci() or later on in boot?
>>
>> I'm not certain. How would I tell this? I think the answer is probably
>> during because the tests Matt had me do involved inserting reboot
>> instructions into the code and testing where the hang occurred. But
>> I'm not sure whether that showed absolutely that the hang occurs
>> actually during setup_efi_pci().
>
> Could you try the attached patch and let me know what you observe?
>
> ---
>
> diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
> index b7388a4..f4a966d 100644
> --- a/arch/x86/boot/compressed/eboot.c
> +++ b/arch/x86/boot/compressed/eboot.c
> @@ -261,30 +261,37 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
>         int i;
>         struct setup_data *data;
>
> +       efi_printk("1\n");
>         data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
>
>         while (data && data->next)
>                 data = (struct setup_data *)(unsigned long)data->next;
>
> +       efi_printk("2\n");
>         status = efi_call_phys5(sys_table->boottime->locate_handle,
>                                 EFI_LOCATE_BY_PROTOCOL, &pci_proto,
>                                 NULL, &size, pci_handle);
>
> +       efi_printk("3\n");
>         if (status == EFI_BUFFER_TOO_SMALL) {
>                 status = efi_call_phys3(sys_table->boottime->allocate_pool,
>                                         EFI_LOADER_DATA, size, &pci_handle);
>
> +               efi_printk("4\n");
>                 if (status != EFI_SUCCESS)
>                         return status;
>
> +               efi_printk("5\n");
>                 status = efi_call_phys5(sys_table->boottime->locate_handle,
>                                         EFI_LOCATE_BY_PROTOCOL, &pci_proto,
>                                         NULL, &size, pci_handle);
> +               efi_printk("6\n");
>         }
>
>         if (status != EFI_SUCCESS)
>                 goto free_handle;
>
> +       efi_printk("7\n");
>         nr_pci = size / sizeof(void *);
>         for (i = 0; i < nr_pci; i++) {
>                 void *h = pci_handle[i];
> @@ -297,13 +304,16 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
>                 if (status != EFI_SUCCESS)
>                         continue;
>
> +               efi_printk("8\n");
>                 if (!pci)
>                         continue;
>
> +               efi_printk("9\n");
>  #ifdef CONFIG_X86_64
>                 status = efi_call_phys4(pci->attributes, pci,
>                                         EfiPciIoAttributeOperationGet, 0,
>                                         &attributes);
> +               efi_printk("10\n");
>  #else
>                 status = efi_call_phys5(pci->attributes, pci,
>                                         EfiPciIoAttributeOperationGet, 0, 0,
> @@ -312,43 +322,54 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
>                 if (status != EFI_SUCCESS)
>                         continue;
>
> +               efi_printk("11\n");
>                 if (!pci->romimage || !pci->romsize)
>                         continue;
>
> +               efi_printk("12\n");
>                 size = pci->romsize + sizeof(*rom);
>
>                 status = efi_call_phys3(sys_table->boottime->allocate_pool,
>                                 EFI_LOADER_DATA, size, &rom);
>
> +               efi_printk("13\n");
>                 if (status != EFI_SUCCESS)
>                         continue;
>
> +               efi_printk("14\n");
>                 rom->data.type = SETUP_PCI;
>                 rom->data.len = size - sizeof(struct setup_data);
>                 rom->data.next = 0;
>                 rom->pcilen = pci->romsize;
>
> +               efi_printk("15\n");
>                 status = efi_call_phys5(pci->pci.read, pci,
>                                         EfiPciIoWidthUint16, PCI_VENDOR_ID,
>                                         1, &(rom->vendor));
> +               efi_printk("16\n");
>
>                 if (status != EFI_SUCCESS)
>                         goto free_struct;
>
> +               efi_printk("17\n");
>                 status = efi_call_phys5(pci->pci.read, pci,
>                                         EfiPciIoWidthUint16, PCI_DEVICE_ID,
>                                         1, &(rom->devid));
>
> +               efi_printk("18\n");
>                 if (status != EFI_SUCCESS)
>                         goto free_struct;
>
> +               efi_printk("19\n");
>                 status = efi_call_phys5(pci->get_location, pci,
>                                         &(rom->segment), &(rom->bus),
>                                         &(rom->device), &(rom->function));
>
> +               efi_printk("20\n");
>                 if (status != EFI_SUCCESS)
>                         goto free_struct;
>
> +               efi_printk("21\n");
>                 memcpy(rom->romdata, pci->romimage, pci->romsize);
>
>                 if (data)
> @@ -358,13 +379,18 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
>
>                 data = (struct setup_data *)rom;
>
> +               efi_printk("22\n");
>                 continue;
>         free_struct:
> +               efi_printk("23\n");
>                 efi_call_phys1(sys_table->boottime->free_pool, rom);
> +               efi_printk("24\n");
>         }
>
>  free_handle:
> +       efi_printk("25\n");
>         efi_call_phys1(sys_table->boottime->free_pool, pci_handle);
> +       efi_printk("26\n");
>         return status;
>  }
>
Could you give me a revision number this patch should work with? I
tried it with both the revision I was using before and the current git
and in both cases, the patch failed:

patching file arch/x86/boot/compressed/eboot.c
Hunk #1 FAILED at 261.
Hunk #2 FAILED at 297.
Hunk #3 FAILED at 312.
Hunk #4 FAILED at 358.
4 out of 4 hunks FAILED -- saving rejects to file
arch/x86/boot/compressed/eboot.c.rej
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux