Re: DVICO FusionHDTV5 Express Support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The results are listed at the bottom:

> >>>> Debug looks OK. If you have another board where you know for certain
> >>>> that tuning a specific 8VSB frequency works, then tuning this same
> >>>> frequency with the LG should probably work reliably.
> >>> The installed Airstar HD5000 cards both have an LG tuner and can tune perfectly fine.
> >> OK, pick a single frequency and focus on always tuning that for the time
> >> being with the Express card.
> >
> > HD5000 Results:
> > % /usr/bin/azap -a 1 -r -c ~/.azap/channels.conf "KTTV DT"
> > using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
> > tuning to 779028615 Hz
> > video pid 0x0031, audio pid 0x0034
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 1e | signal c6ce | snr 1b2e | ber 00000000 | unc 00000000 | FE_HAS_LOCK
> > status 1e | signal e4e6 | snr 1f4b | ber 00000000 | unc 0000003d | FE_HAS_LOCK
> > status 1e | signal e1b8 | snr 1edc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
> > status 1e | signal e86e | snr 1fc7 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
> > status 1e | signal e86e | snr 1fc7 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
> > status 1e | signal daef | snr 1dee | ber 00000000 | unc 00000000 | FE_HAS_LOCK
> > ^C
> >
> > FusionHDTV5 Results:
> > % /usr/bin/azap -a 0 -r -c ~/.azap/channels.conf "KTTV DT"
> > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> > tuning to 779028615 Hz
> > video pid 0x0031, audio pid 0x0034
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > ^C
> >
> >>>> In terms of the tuner-to-demod, are you confident that the I/F is set
> >>>> correctly? (And inversion for that matter?)
> >>> I am not sure I understand the above question.  How would I go about setting up the interface for
> >> the tuner-to-demod?
> >>
> >> /me checks the code and thinks it should be working fine.
> >>
> >> Specifically, please list here the frequencies that lock reliably for
> >> you on 8VSB with other boards. I've seen issues in the past (mainly due
> >> to driver issues) where channels tables work reliably for one tuner but
> >> not for another.
> >
> > Here is the working table that the HD5000 boards are using.
> >
> > KFLA-LD:183028615:8VSB:4128:4129:1
> > HCCN:183028615:8VSB:4130:4131:2
> > CVTV:183028615:8VSB:4640:4641:3
> > WSTV:183028615:8VSB:80:89:4
> > KTBN-DT 1:527028615:8VSB:49:52:3
> > KTBN-DT 2:527028615:8VSB:65:68:4
> > KTBN-DT 3:527028615:8VSB:81:84:5
> > KTBN-DT 4:527028615:8VSB:97:100:6
> > KTBN-DT 5:527028615:8VSB:113:116:7
> > TeleFutura:563028615:8VSB:49:52:3
> > KTLA-DT:575028615:8VSB:49:52:3
> > KDOC-HD:581028615:8VSB:49:52:1
> > KDOCSD1:581028615:8VSB:65:68:2
> > [0004]:581028615:8VSB:81:84:4
> > KDOCSD2:581028615:8VSB:81:84:3
> > Univision:599028615:8VSB:49:52:3
> > NBC-4LA:605028615:8VSB:49:52:3
> > WX-Plus:605028615:8VSB:65:68:4
> > NewsRaw:605028615:8VSB:81:84:5
> > ION:617028615:8VSB:49:52:3
> > KPXN qubo:617028615:8VSB:65:68:4
> > IONLife:617028615:8VSB:81:84:5
> > Worship:617028615:8VSB:97:100:6
> > KVEA-HD:623028615:8VSB:49:52:3
> > KVEA-SD:623028615:8VSB:65:68:4
> > KLCS-DT:635028615:8VSB:49:52:2
> > KLCS-DT:635028615:8VSB:65:68:3
> > KLCS-DT:635028615:8VSB:81:84:4
> > KLCS-DT:635028615:8VSB:97:100:5
> > [0006]:635028615:8VSB:113:116:6
> > KWHY-HD:641028615:8VSB:49:52:3
> > KWHY-SD:641028615:8VSB:65:68:4
> > KCAL-DT:647028615:8VSB:49:52:1
> > KAZA-DT:671028615:8VSB:49:52:3
> > KAZA-TV:671028615:8VSB:0:0:65535
> > KOCE-HD:677028615:8VSB:49:52:3
> > KOCE-OC:677028615:8VSB:65:68:4
> > KOCE-SD:677028615:8VSB:81:84:5
> > Daystar:677028615:8VSB:97:100:6
> > KOCE-TV:677028615:8VSB:0:0:65535
> > KJLA-DT:683028615:8VSB:49:52:3
> > KXLA-DT:683028615:8VSB:65:68:4
> > KVMD-DT:683028615:8VSB:81:84:5
> > LATV:683028615:8VSB:97:100:6
> > KXLA-DT:695028615:8VSB:49:52:3
> > KVMD-DT:695028615:8VSB:65:68:4
> > KABC-DT:707028615:8VSB:49:52:1
> > KABC-SD:707028615:8VSB:65:68:2
> > KABC-WN:707028615:8VSB:81:84:3
> > KCET-HD:743028615:8VSB:49:52:1
> > KCET-OC:743028615:8VSB:97:100:2
> > KCET-Vm:743028615:8VSB:81:84:3
> > KCET-W:743028615:8VSB:65:68:4
> > [0009]:743028615:8VSB:0:0:9
> > [000a]:743028615:8VSB:0:0:10
> > KCBS-DT:749028615:8VSB:49:52:1
> > LA18.1:755028615:8VSB:49:52:1
> > LA18.8:755028615:8VSB:161:164:8
> > LA18.5:755028615:8VSB:113:116:5
> > LA18.7:755028615:8VSB:145:148:7
> > LA18.3:755028615:8VSB:81:84:3
> > LA18.6:755028615:8VSB:129:132:6
> > LA18:755028615:8VSB:0:0:65535
> > KTTV DT:779028615:8VSB:49:52:3
> > KCOP DT:785028615:8VSB:49:52:3
> > KRCA-DT:797028615:8VSB:49:52:1
> > KRCA-DT:797028615:8VSB:65:68:2
> >
> > Thanks again for the help!
> > --James Evans
> >
> 
> Add this:
> 
> test:779000000:8VSB:49:52:3
> 
> And try azap -r test
> 
> Better?

% azap -a 0 -r "test"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 779000000 Hz
video pid 0x0031, audio pid 0x0034
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | 
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | 
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | 
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | 
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | 
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | 
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | 
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | 
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | 
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | 
^C



_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux