James Evans wrote: >> James Evans wrote: >>> Thank you for such a quick response. >>> >>>> Debug looks OK. If you have another board where you know for certain >>>> that tuning a specific 8VSB frequency works, then tuning this same >>>> frequency with the LG should probably work reliably. >>> The installed Airstar HD5000 cards both have an LG tuner and can tune perfectly fine. >> OK, pick a single frequency and focus on always tuning that for the time >> being with the Express card. > > HD5000 Results: > % /usr/bin/azap -a 1 -r -c ~/.azap/channels.conf "KTTV DT" > using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' > tuning to 779028615 Hz > video pid 0x0031, audio pid 0x0034 > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 1e | signal c6ce | snr 1b2e | ber 00000000 | unc 00000000 | FE_HAS_LOCK > status 1e | signal e4e6 | snr 1f4b | ber 00000000 | unc 0000003d | FE_HAS_LOCK > status 1e | signal e1b8 | snr 1edc | ber 00000000 | unc 00000000 | FE_HAS_LOCK > status 1e | signal e86e | snr 1fc7 | ber 00000000 | unc 00000000 | FE_HAS_LOCK > status 1e | signal e86e | snr 1fc7 | ber 00000000 | unc 00000000 | FE_HAS_LOCK > status 1e | signal daef | snr 1dee | ber 00000000 | unc 00000000 | FE_HAS_LOCK > ^C > > FusionHDTV5 Results: > % /usr/bin/azap -a 0 -r -c ~/.azap/channels.conf "KTTV DT" > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > tuning to 779028615 Hz > video pid 0x0031, audio pid 0x0034 > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > ^C > >>>> In terms of the tuner-to-demod, are you confident that the I/F is set >>>> correctly? (And inversion for that matter?) >>> I am not sure I understand the above question. How would I go about setting up the interface for >> the tuner-to-demod? >> >> /me checks the code and thinks it should be working fine. >> >> Specifically, please list here the frequencies that lock reliably for >> you on 8VSB with other boards. I've seen issues in the past (mainly due >> to driver issues) where channels tables work reliably for one tuner but >> not for another. > > Here is the working table that the HD5000 boards are using. > > KFLA-LD:183028615:8VSB:4128:4129:1 > HCCN:183028615:8VSB:4130:4131:2 > CVTV:183028615:8VSB:4640:4641:3 > WSTV:183028615:8VSB:80:89:4 > KTBN-DT 1:527028615:8VSB:49:52:3 > KTBN-DT 2:527028615:8VSB:65:68:4 > KTBN-DT 3:527028615:8VSB:81:84:5 > KTBN-DT 4:527028615:8VSB:97:100:6 > KTBN-DT 5:527028615:8VSB:113:116:7 > TeleFutura:563028615:8VSB:49:52:3 > KTLA-DT:575028615:8VSB:49:52:3 > KDOC-HD:581028615:8VSB:49:52:1 > KDOCSD1:581028615:8VSB:65:68:2 > [0004]:581028615:8VSB:81:84:4 > KDOCSD2:581028615:8VSB:81:84:3 > Univision:599028615:8VSB:49:52:3 > NBC-4LA:605028615:8VSB:49:52:3 > WX-Plus:605028615:8VSB:65:68:4 > NewsRaw:605028615:8VSB:81:84:5 > ION:617028615:8VSB:49:52:3 > KPXN qubo:617028615:8VSB:65:68:4 > IONLife:617028615:8VSB:81:84:5 > Worship:617028615:8VSB:97:100:6 > KVEA-HD:623028615:8VSB:49:52:3 > KVEA-SD:623028615:8VSB:65:68:4 > KLCS-DT:635028615:8VSB:49:52:2 > KLCS-DT:635028615:8VSB:65:68:3 > KLCS-DT:635028615:8VSB:81:84:4 > KLCS-DT:635028615:8VSB:97:100:5 > [0006]:635028615:8VSB:113:116:6 > KWHY-HD:641028615:8VSB:49:52:3 > KWHY-SD:641028615:8VSB:65:68:4 > KCAL-DT:647028615:8VSB:49:52:1 > KAZA-DT:671028615:8VSB:49:52:3 > KAZA-TV:671028615:8VSB:0:0:65535 > KOCE-HD:677028615:8VSB:49:52:3 > KOCE-OC:677028615:8VSB:65:68:4 > KOCE-SD:677028615:8VSB:81:84:5 > Daystar:677028615:8VSB:97:100:6 > KOCE-TV:677028615:8VSB:0:0:65535 > KJLA-DT:683028615:8VSB:49:52:3 > KXLA-DT:683028615:8VSB:65:68:4 > KVMD-DT:683028615:8VSB:81:84:5 > LATV:683028615:8VSB:97:100:6 > KXLA-DT:695028615:8VSB:49:52:3 > KVMD-DT:695028615:8VSB:65:68:4 > KABC-DT:707028615:8VSB:49:52:1 > KABC-SD:707028615:8VSB:65:68:2 > KABC-WN:707028615:8VSB:81:84:3 > KCET-HD:743028615:8VSB:49:52:1 > KCET-OC:743028615:8VSB:97:100:2 > KCET-Vm:743028615:8VSB:81:84:3 > KCET-W:743028615:8VSB:65:68:4 > [0009]:743028615:8VSB:0:0:9 > [000a]:743028615:8VSB:0:0:10 > KCBS-DT:749028615:8VSB:49:52:1 > LA18.1:755028615:8VSB:49:52:1 > LA18.8:755028615:8VSB:161:164:8 > LA18.5:755028615:8VSB:113:116:5 > LA18.7:755028615:8VSB:145:148:7 > LA18.3:755028615:8VSB:81:84:3 > LA18.6:755028615:8VSB:129:132:6 > LA18:755028615:8VSB:0:0:65535 > KTTV DT:779028615:8VSB:49:52:3 > KCOP DT:785028615:8VSB:49:52:3 > KRCA-DT:797028615:8VSB:49:52:1 > KRCA-DT:797028615:8VSB:65:68:2 > > Thanks again for the help! > --James Evans > Add this: test:779000000:8VSB:49:52:3 And try azap -r test Better? - Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
