James Evans wrote: > The results are listed at the bottom: > >>>>>> Debug looks OK. If you have another board where you know for certain >>>>>> that tuning a specific 8VSB frequency works, then tuning this same >>>>>> frequency with the LG should probably work reliably. >>>>> The installed Airstar HD5000 cards both have an LG tuner and can tune perfectly fine. >>>> OK, pick a single frequency and focus on always tuning that for the time >>>> being with the Express card. >>> HD5000 Results: >>> % /usr/bin/azap -a 1 -r -c ~/.azap/channels.conf "KTTV DT" >>> using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' >>> tuning to 779028615 Hz >>> video pid 0x0031, audio pid 0x0034 >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> status 1e | signal c6ce | snr 1b2e | ber 00000000 | unc 00000000 | FE_HAS_LOCK >>> status 1e | signal e4e6 | snr 1f4b | ber 00000000 | unc 0000003d | FE_HAS_LOCK >>> status 1e | signal e1b8 | snr 1edc | ber 00000000 | unc 00000000 | FE_HAS_LOCK >>> status 1e | signal e86e | snr 1fc7 | ber 00000000 | unc 00000000 | FE_HAS_LOCK >>> status 1e | signal e86e | snr 1fc7 | ber 00000000 | unc 00000000 | FE_HAS_LOCK >>> status 1e | signal daef | snr 1dee | ber 00000000 | unc 00000000 | FE_HAS_LOCK >>> ^C >>> >>> FusionHDTV5 Results: >>> % /usr/bin/azap -a 0 -r -c ~/.azap/channels.conf "KTTV DT" >>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >>> tuning to 779028615 Hz >>> video pid 0x0031, audio pid 0x0034 >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | >>> ^C >>> >>>>>> In terms of the tuner-to-demod, are you confident that the I/F is set >>>>>> correctly? (And inversion for that matter?) >>>>> I am not sure I understand the above question. How would I go about setting up the interface for >>>> the tuner-to-demod? >>>> >>>> /me checks the code and thinks it should be working fine. >>>> >>>> Specifically, please list here the frequencies that lock reliably for >>>> you on 8VSB with other boards. I've seen issues in the past (mainly due >>>> to driver issues) where channels tables work reliably for one tuner but >>>> not for another. >>> Here is the working table that the HD5000 boards are using. >>> >>> KFLA-LD:183028615:8VSB:4128:4129:1 >>> HCCN:183028615:8VSB:4130:4131:2 >>> CVTV:183028615:8VSB:4640:4641:3 >>> WSTV:183028615:8VSB:80:89:4 >>> KTBN-DT 1:527028615:8VSB:49:52:3 >>> KTBN-DT 2:527028615:8VSB:65:68:4 >>> KTBN-DT 3:527028615:8VSB:81:84:5 >>> KTBN-DT 4:527028615:8VSB:97:100:6 >>> KTBN-DT 5:527028615:8VSB:113:116:7 >>> TeleFutura:563028615:8VSB:49:52:3 >>> KTLA-DT:575028615:8VSB:49:52:3 >>> KDOC-HD:581028615:8VSB:49:52:1 >>> KDOCSD1:581028615:8VSB:65:68:2 >>> [0004]:581028615:8VSB:81:84:4 >>> KDOCSD2:581028615:8VSB:81:84:3 >>> Univision:599028615:8VSB:49:52:3 >>> NBC-4LA:605028615:8VSB:49:52:3 >>> WX-Plus:605028615:8VSB:65:68:4 >>> NewsRaw:605028615:8VSB:81:84:5 >>> ION:617028615:8VSB:49:52:3 >>> KPXN qubo:617028615:8VSB:65:68:4 >>> IONLife:617028615:8VSB:81:84:5 >>> Worship:617028615:8VSB:97:100:6 >>> KVEA-HD:623028615:8VSB:49:52:3 >>> KVEA-SD:623028615:8VSB:65:68:4 >>> KLCS-DT:635028615:8VSB:49:52:2 >>> KLCS-DT:635028615:8VSB:65:68:3 >>> KLCS-DT:635028615:8VSB:81:84:4 >>> KLCS-DT:635028615:8VSB:97:100:5 >>> [0006]:635028615:8VSB:113:116:6 >>> KWHY-HD:641028615:8VSB:49:52:3 >>> KWHY-SD:641028615:8VSB:65:68:4 >>> KCAL-DT:647028615:8VSB:49:52:1 >>> KAZA-DT:671028615:8VSB:49:52:3 >>> KAZA-TV:671028615:8VSB:0:0:65535 >>> KOCE-HD:677028615:8VSB:49:52:3 >>> KOCE-OC:677028615:8VSB:65:68:4 >>> KOCE-SD:677028615:8VSB:81:84:5 >>> Daystar:677028615:8VSB:97:100:6 >>> KOCE-TV:677028615:8VSB:0:0:65535 >>> KJLA-DT:683028615:8VSB:49:52:3 >>> KXLA-DT:683028615:8VSB:65:68:4 >>> KVMD-DT:683028615:8VSB:81:84:5 >>> LATV:683028615:8VSB:97:100:6 >>> KXLA-DT:695028615:8VSB:49:52:3 >>> KVMD-DT:695028615:8VSB:65:68:4 >>> KABC-DT:707028615:8VSB:49:52:1 >>> KABC-SD:707028615:8VSB:65:68:2 >>> KABC-WN:707028615:8VSB:81:84:3 >>> KCET-HD:743028615:8VSB:49:52:1 >>> KCET-OC:743028615:8VSB:97:100:2 >>> KCET-Vm:743028615:8VSB:81:84:3 >>> KCET-W:743028615:8VSB:65:68:4 >>> [0009]:743028615:8VSB:0:0:9 >>> [000a]:743028615:8VSB:0:0:10 >>> KCBS-DT:749028615:8VSB:49:52:1 >>> LA18.1:755028615:8VSB:49:52:1 >>> LA18.8:755028615:8VSB:161:164:8 >>> LA18.5:755028615:8VSB:113:116:5 >>> LA18.7:755028615:8VSB:145:148:7 >>> LA18.3:755028615:8VSB:81:84:3 >>> LA18.6:755028615:8VSB:129:132:6 >>> LA18:755028615:8VSB:0:0:65535 >>> KTTV DT:779028615:8VSB:49:52:3 >>> KCOP DT:785028615:8VSB:49:52:3 >>> KRCA-DT:797028615:8VSB:49:52:1 >>> KRCA-DT:797028615:8VSB:65:68:2 >>> >>> Thanks again for the help! >>> --James Evans >>> >> Add this: >> >> test:779000000:8VSB:49:52:3 >> >> And try azap -r test >> >> Better? > > % azap -a 0 -r "test" > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > tuning to 779000000 Hz > video pid 0x0031, audio pid 0x0034 > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | We either have a massive regression in support for this card or something is sick in your environment. Everyone, Is anyone else using the current master repo with the HDTV5 Express? Or, can someone please pull master and test it. Thanks, Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
