-----Original message----- From: David Santinoli <marauder@xxxxxxxxxx> Sent: Tue 23-09-2008 15:16 To: linux-dvb@xxxxxxxxxxx; Subject: Satelco EasyWatch reception woes in the 11700-11800 MHz range > > Hi, > I'm experiencing reception problems (blocky video and scratchy audio) > with my Satelco EasyWatch PCI card (PCI ID 1131:7146) when tuning to > certain frequencies, roughly in the 11700-11800 MHz range. Channels > outside this interval are tuned OK. > It does not look like an antenna-related issue, since feeding the same > input to a different card (Twinhan VP1032) or a set-top box gives good > results with all channels. > Satelco is a rebrand of the KNC1 product line (or the other way around). And I encountered similar problems with the KNC1 TV-Station DVB-S card as well. But in my case, I had only problems with the transponders on Astra 28.2e which had the BBC and ITV channels on them. Other sats (or at least, the ones I could receive and watch) didn't had the problems. > Anyone with similar experiences (with this or other cards)? > First I thought it was an dish-alligment problem. But after switching to a TT-1500S the problem was resolved. I then thought allready it was a driver problem. Because the TT-1500S resolved it, I never thought about it again till your message. > Thanks, > David Regards, Niels Wagenaar _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
