Hi 2008/8/27 Roger James <roger@xxxxxxxxxxxxxxxxxxxxx>: > Roger James wrote: > > Do you ( or anyone) know of any source of information on the software > interface to these boards? The guys who wrote the original code must have > had some. Is Andrew de Quincey still active on the list? Unfortunately not. Andrew had documentation from TT/Hauppauge but under NDA. I did not see anything from him on the list after he added support for the then new 1.1 version. > Hooray, > > I have got it working. I took out the TT3200 and the CI board to check their > versions. Before putting them back in I cleaned and reseated the DEBI So what revision of the CI board do you have ? > interface cable connections. Whilst I was playing with some more diagnostics > I noticed I was getting back a 0x1d (CISTPL_DEVICE_OA) code from the call > the read_attribute_memory in the call to ciintf_poll_status I had put into > the "PC card not responding" path. I put back the change to use polling mode > for firmware version 0xa0 that I had tried and failed with before, and lo > and behold it all burst into life. Well at least it appears to have > intiailised, whether it will decrypt is for another day. > I'm glad you got it working. I wonder if that means there we indeed have different CI firmware on new CI boards that need to be catered for in the driver. > Here is the dmesg output now for information. > > saa7146: register extension 'budget_ci dvb'. > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> > IRQ 12 > saa7146: found saa7146 @ mem e0a42000 (revision 1, irq 12) (0x13c2,0x1019). > saa7146 (0): dma buffer size 192512 > DVB: registering new adapter (TT-Budget S2-3200 PCI) > adapter has MAC addr = 00:d0:5c:68:34:04 > input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input9 > budget_ci: Slot status d587c000 set to NONE 3 ci_version a0 > budget_ci: Slot status d587c000 set to PRESENT > dvb_ca_en50221_init > budget_ci: CI interface initialised > dvb_ca_en50221_thread > budget_ci: Slot status d587c000 set to RESET > budget_ci: Slot status d587c000 set to READY > budget_ci: read_attribute 1d > TUPLE type:0x1d length:4 > 0x00: 0x00 . > 0x01: 0x61 a > 0x02: 0x00 . > 0x03: 0xff . > TUPLE type:0x1c length:4 > 0x00: 0x00 . > 0x01: 0xd3 . > 0x02: 0x00 . > 0x03: 0xff . > TUPLE type:0x15 length:27 > 0x00: 0x05 . > 0x01: 0x00 . > 0x02: 0x54 T > 0x03: 0x2d - > 0x04: 0x52 R > 0x05: 0x45 E > 0x06: 0x58 X > 0x07: 0x58 X > 0x08: 0x00 . > 0x09: 0x54 T > 0x0a: 0x52 R > 0x0b: 0x45 E > 0x0c: 0x58 X > 0x0d: 0x20 > 0x0e: 0x43 C > 0x0f: 0x41 A > 0x10: 0x4d M > 0x11: 0x00 . > 0x12: 0x52 R > 0x13: 0x45 E > 0x14: 0x56 V > 0x15: 0x00 . > 0x16: 0x32 2 > 0x17: 0x2e . > 0x18: 0x32 2 > 0x19: 0x00 . > 0x1a: 0xff . > TUPLE type:0x20 length:4 > 0x00: 0xc9 . > 0x01: 0x02 . > 0x02: 0x01 . > 0x03: 0x01 . > TUPLE type:0x1a length:21 > 0x00: 0x01 . > 0x01: 0x39 9 > 0x02: 0x00 . > 0x03: 0x02 . > 0x04: 0x03 . > 0x05: 0xc0 . > 0x06: 0x0e . > 0x07: 0x41 A > 0x08: 0x02 . > 0x09: 0x44 D > 0x0a: 0x56 V > 0x0b: 0x42 B > 0x0c: 0x5f _ > 0x0d: 0x43 C > 0x0e: 0x49 I > 0x0f: 0x5f _ > 0x10: 0x56 V > 0x11: 0x31 1 > 0x12: 0x2e . > 0x13: 0x30 0 > 0x14: 0x30 0 > TUPLE type:0x1b length:42 > 0x00: 0xf9 . > 0x01: 0x04 . > 0x02: 0x09 . > 0x03: 0x7f . > 0x04: 0x55 U > 0x05: 0xcd . > 0x06: 0x19 . > 0x07: 0xd5 . > 0x08: 0x19 . > 0x09: 0x3d = > 0x0a: 0x9e . > 0x0b: 0x25 % > 0x0c: 0x26 & > 0x0d: 0x54 T > 0x0e: 0x22 " > 0x0f: 0xc0 . > 0x10: 0x09 . > 0x11: 0x44 D > 0x12: 0x56 V > 0x13: 0x42 B > 0x14: 0x5f _ > 0x15: 0x48 H > 0x16: 0x4f O > 0x17: 0x53 S > 0x18: 0x54 T > 0x19: 0x00 . > 0x1a: 0xc1 . > 0x1b: 0x0e . > 0x1c: 0x44 D > 0x1d: 0x56 V > 0x1e: 0x42 B > 0x1f: 0x5f _ > 0x20: 0x43 C > 0x21: 0x49 I > 0x22: 0x5f _ > 0x23: 0x4d M > 0x24: 0x4f O > 0x25: 0x44 D > 0x26: 0x55 U > 0x27: 0x4c L > 0x28: 0x45 E > 0x29: 0x00 . > TUPLE type:0x14 length:0 > END OF CHAIN TUPLE type:0xff > Valid DVB CAM detected MANID:2c9 DEVID:101 CONFIGBASE:0x200 > CONFIGOPTION:0x39 > dvb_ca_en50221_set_configoption > Set configoption 0x39, read configoption 0x39 > DVB CAM validated successfully > dvb_ca_en50221_link_init > dvb_ca_en50221_wait_if_status > dvb_ca_en50221_wait_if_status succeeded timeout:0 > dvb_ca_en50221_read_data > Received CA packet for slot 0 connection id 0x0 last_frag:0 size:0x2 > Chosen link buffer size of 255 > dvb_ca_en50221_wait_if_status > dvb_ca_en50221_wait_if_status succeeded timeout:0 > dvb_ca_en50221_write_data > Wrote CA packet for slot 0, connection id 0x0 last_frag:0 size:0x2 > dvb_ca adapter 0: DVB CAM detected and initialised successfully > stb0899_attach: Attaching STB0899 > stb6100_attach: Attaching STB6100 > DVB: registering frontend 0 (STB0899 Multistandard)... That looks perfect. Werner _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
